UGREEN USB 3.0 スイッチセレクター ユーザーマニュアル

導入

The UGREEN USB 3.0 Switch Selector is designed to allow two computers to share up to four USB 3.0 peripheral devices. This device simplifies your workspace by eliminating the need to constantly swap USB cables between your work and personal computers. It supports high-speed data transfer and is compatible with various operating systems.

Image: Before and After using the UGREEN USB 3.0 Switch Selector, illustrating how the device helps declutter a workspace by allowing two computers to share peripherals.

箱の中身

パッケージの内容をチェックして、すべてのアイテムが揃っていることを確認してください。

• 1 x UGREEN USB 3.0 Switch Selector
• 2 x 1.5m USB 3.0 Data Cables
• ユーザーマニュアル (本書) x 1

Image: The package contents of the UGREEN USB 3.0 Switch Selector, showing the main unit, two USB 3.0 data cables, and the included user manual.

設定

Follow these steps to set up your UGREEN USB 3.0 Switch Selector:

1. コンピューターを接続する: Use the provided USB 3.0 data cables to connect your two computers (PC or laptop) to the two USB 3.0 input ports on the back of the switch. These ports are typically labeled '1' and '2'.


Image: A visual representation of connecting two computers, a desktop PC and a laptop, to the input ports of the UGREEN USB 3.0 Switch Selector.

2. USBデバイスを接続する: Plug your USB peripheral devices (e.g., keyboard, mouse, printer, scanner, USB drive, webcam, headset) into the four USB 3.0 output ports on the front of the switch.


Image: The UGREEN USB 3.0 Switch Selector with its input cables connected and various USB devices, such as USB drives, plugged into its four output ports.

3. オプションの電源: For high-power USB devices like HDDs, USB cameras, or certain headphones, it is recommended to connect an external 5V 2A power adapter (not included) to the Micro USB power supply port on the side of the switch. This ensures stable performance and prevents disconnection due to insufficient power.


Image: The UGREEN USB 3.0 Switch Selector connected to a laptop and an external hard drive, highlighting the optional USB-C charging port for providing stable power to high-demand devices.

Note for USB-C Laptops: If your input PC only has a USB-C port, please use a USB-C to USB-A adapter instead of a direct USB-C to USB-A cable. Direct cables may not work as intended.



Image: Instructions on connecting a USB-C laptop to the switch using an OTG USB-C to A adapter for proper functionality.

操作手順

Using the UGREEN USB 3.0 Switch Selector is straightforward:

1. ワンボタン切り替え: To switch control of the connected USB devices between the two computers, simply press the large circular button on the top of the switch.


画像: クローズアップ view of the UGREEN USB 3.0 Switch Selector, highlighting the prominent one-click switch button and the two LED indicator lights.

2. LEDインジケーター: Two blue LED lights, labeled '1' and '2', indicate which computer currently has control of the USB devices. The illuminated LED corresponds to the active computer.
3. 高速データ転送: The switch supports USB 3.0 speeds of up to 5Gbps, allowing for fast data transfer from devices like USB flash drives or external hard drives. It is also backward compatible with USB 2.0.


Image: The UGREEN USB 3.0 Switch Selector with USB drives connected, emphasizing its capability for 5Gbps high-speed data transmission.

4. 幅広い互換性: The UGREEN USB 3.0 Switch Selector is plug-and-play and does not require driver installation for most operating systems, including Windows, macOS, Chrome OS, and Linux.


Image: A visual representation of the UGREEN USB 3.0 Switch Selector's broad compatibility across various operating systems like Windows, macOS, Chrome OS, and Linux.

公式製品ビデオ

メンテナンス

To ensure the longevity and optimal performance of your UGREEN USB 3.0 Switch Selector, please follow these maintenance guidelines:

• クリーニング： Use a soft, dry cloth to wipe the surface of the device. Avoid using liquid cleaners or abrasive materials, as they may damage the finish.
• ストレージ： 長期間使用しない場合は、スイッチを直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 取り扱い： Avoid dropping the device or subjecting it to strong impacts. Do not attempt to disassemble or repair the switch yourself, as this will void the warranty.

トラブルシューティング

If you encounter any issues with your UGREEN USB 3.0 Switch Selector, please refer to the following common troubleshooting tips:

• 認識されないデバイス:
  • Ensure all USB cables are securely connected to both the switch and the computers/devices.
  • USB デバイスをコンピューターに直接接続して、独立して機能することを確認してください。
  • If using high-power devices, ensure an external 5V 2A power adapter is connected to the switch.
  • 接続されているコンピューターを再起動します。
• 切り替え遅延:
  • While switching is generally fast, a slight delay (around 2 seconds) is normal as the computers re-detect the USB devices.
  • Ensure no background processes are heavily utilizing USB resources on either computer.
• 断続的な切断:
  • This often indicates insufficient power. Connect an external 5V 2A power adapter to the switch, especially if multiple high-power devices are connected.
  • ケーブル接続が緩んでいないか確認してください。
• LEDインジケーターが点灯しない:
  • Verify that both computers are powered on and properly connected to the switch's input ports.
  • Ensure the USB cables from the computers to the switch are functioning correctly.

For more detailed troubleshooting or specific issues, please refer to the official UGREEN Troubleshooting Guide (PDF) available at: https://manuals.plus/m/09217a33d754b9ca83811ee2a0f69dc4b275b4a3fdbec02d969808dbbbcc3133

仕様

保証とサポート

UGREEN products are designed with quality and reliability in mind. For warranty information and customer support, please visit the official UGREEN webサイトをご覧いただくか、カスタマー サービスに直接お問い合わせください。

You can also find more information and support resources on the UGREEN Amazon store page: UGREENストア