1. はじめに
This manual provides essential information for the safe and effective installation, operation, and maintenance of the HILTI CP 680-P 6" Firestop Lid (Model 2102433). This product is designed to provide fire protection for penetrations in fire-rated constructions. Adherence to these instructions is crucial for ensuring the product's performance and compliance with fire safety regulations.
2. 安全情報
Always observe general safety precautions when working with firestop materials and during construction activities. Failure to follow these safety instructions may result in injury or property damage.
- インストールの前に、すべての指示をよくお読みください。
- 安全メガネや手袋などの適切な個人用保護具 (PPE) を着用してください。
- 作業エリアの換気が十分であることを確認してください。
- 子供や権限のない人員を作業エリアに近づけないでください。
- Consult local building codes and fire safety regulations for specific requirements.
- Do not modify the product. Use only genuine HILTI components.
3.製品オーバーview
The HILTI CP 680-P 6" Firestop Lid is an integral component of a fire protection system designed to seal openings around pipes or cables passing through fire-rated walls or floors. It is specifically engineered to prevent the spread of fire, smoke, and toxic gases.
Figure 1: HILTI CP 680-P 6" Firestop Lid. This image displays the red, circular firestop lid, which is designed to fit around penetrations in fire-rated barriers, providing a critical seal against fire and smoke spread.
Key features include its robust construction and fire-resistant properties, ensuring long-term performance in demanding environments.
4. セットアップとインストール
Proper installation is critical for the firestop lid to function as intended. Follow these steps carefully:
- オープニングを準備する: Ensure the opening in the fire-rated wall or floor is clean, dry, and free from debris. The opening size must be appropriate for the 6" lid and the penetrating item (pipe/cable).
- 蓋の位置を決めます。 Place the HILTI CP 680-P lid around the penetrating item. The lid is typically split to allow for easy installation around existing penetrations. Ensure the two halves fit together securely.
- 蓋をしっかりと固定します。 Depending on the specific firestop system and application, the lid may need to be secured with fasteners (e.g., screws, anchors) to the fire-rated barrier. Refer to the complete HILTI firestop system documentation for fastener requirements and spacing.
- シールギャップ: Any remaining gaps between the lid and the penetrating item, or between the lid and the fire-rated barrier, must be sealed with an approved HILTI firestop sealant (e.g., CP 606, CP 601S) to maintain the fire rating. Apply sealant according to the product's instructions.
- インストールの検査: Visually inspect the installed lid and sealant to ensure a complete and continuous firestop seal.
Note: Always refer to the specific HILTI system approval and installation guidelines for the particular firestop assembly being used.
5. Operating Instructions (Inspection)
The HILTI CP 680-P Firestop Lid is a passive fire protection component. Its "operation" primarily involves maintaining its integrity and ensuring it remains properly installed. Regular inspection is key to its continued effectiveness.
- 目視検査: Periodically inspect the firestop lid for any signs of damage, displacement, or deterioration.
- シールの完全性: Check the integrity of the firestop sealant around the lid and the penetrating item. Look for cracks, gaps, or areas where the sealant may have pulled away.
- Penetration Changes: If any new pipes, cables, or other items are added or removed from the penetration, the firestop system, including the lid, must be re-evaluated and re-sealed as necessary by qualified personnel.
6. メンテナンス
The HILTI CP 680-P Firestop Lid requires minimal maintenance beyond regular inspection. If any issues are identified during inspection:
- 修復ダメージ: Any damaged or displaced lids should be repaired or replaced immediately using genuine HILTI components.
- Re-seal Gaps: If sealant integrity is compromised, clean the affected area and re-apply approved HILTI firestop sealant according to product instructions.
- 専門家による評価: For significant damage or complex repairs, consult a qualified fire protection professional or HILTI technical support.
7。 トラブルシューティング
Most issues related to firestop lids stem from improper installation or damage over time. Here are common concerns and their resolutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lid is loose or displaced. | Improper fastening during installation; impact damage. | Re-secure the lid with appropriate fasteners. If damaged, replace the lid. |
| Gaps visible around the lid or penetrating item. | Inadequate sealant application; sealant deterioration. | Clean the area and re-apply approved HILTI firestop sealant to fill all gaps. |
| Lid appears cracked or broken. | Physical damage; material fatigue. | Replace the damaged lid with a new HILTI CP 680-P 6" Firestop Lid. |
8. 仕様
- モデル番号: 2102433
- ブランド： ヒルティ
- 製品タイプ: Firestop Lid
- 公称サイズ: 6 inches (for pipe/cable penetration)
- 材料： Fire-resistant composite
- 色： Red (typical for firestop products)
- 商品の重量: 約1ポンド
- 応用： Fire-rated walls and floors
9. 保証とサポート
HILTI products are manufactured to high-quality standards. For specific warranty information, please refer to the official HILTI warranty statement provided with your purchase or visit the official HILTI website. For technical support, product inquiries, or assistance with installation, please contact HILTI customer service or your local HILTI representative.
ヒルティ公式 Webサイト： www.hilti.com
