Proster RZMT-10 MD

Proster RZMT-10 MD Digital Wood Moisture Meter Instruction Manual

Model: RZMT-10 MD

導入

This manual provides comprehensive instructions for the safe and effective use of the Proster RZMT-10 MD Digital Wood Moisture Meter. This device is designed to measure the moisture content of wood, paper, and cardboard using electrical resistance. Please read this manual thoroughly before operation to ensure accurate measurements and to prevent damage to the device or injury.

安全情報

警告： The electrode pins are sharp. Exercise caution when handling this instrument. Do not point the probe pins towards humans or animals to avoid injury. Keep the device out of reach of children.

製品終了view

The Proster RZMT-10 MD Digital Wood Moisture Meter is a handheld device featuring an HD LCD for clear readings. It includes integrated electrode pins for measurement and a protective cap for safety.

Proster RZMT-10 MD Moisture Meter, a general view デバイスの。
図1: 一般的な view of the Proster RZMT-10 MD Digital Wood Moisture Meter.

主な特徴:

  • Displays wood moisture content on an LCD screen.
  • Suitable for wood, paper, and cardboard.
  • Measurement principle: Electrical resistance.
  • Memory for 4 wood groups with calibrations for approximately 50 species.
  • Impact-proof housing for durability.
  • Automatic power-off function to conserve battery.
  • Data hold function for stable readings.
  • Built-in battery check and low battery indicator.
  • Comes with a protective cap.

コンポーネントの識別:

Proster RZMT-10 MD Moisture Meter with labeled components: Protection Cap, Measurement Pins, Large LCD Screen, Power Button, MODE Button, HOLD Button, Simple Description of 4 Wood Groups.
図2: Proster RZMT-10 MD Digital Wood Moisture Meter with labeled parts. This image shows the device's front view, highlighting the protection cap, measurement pins, large LCD screen, power button, mode button, hold button, and a simple description of the four wood groups.

設定

バッテリーの取り付け:

  1. デバイスの背面にあるバッテリー収納部を見つけます。
  2. 電池ボックスのカバーを開きます。
  3. 正しい極性 (+/-) を確認して、9V 電池を 1 個挿入します。
  4. 電池カバーをしっかりと閉じてください。
  5. デバイスは使用できるようになりました。

注記： A 9V battery is included with the product.

操作手順

水分含有量を正確に測定するには、次の手順に従ってください。

  1. Step 1: Remove Protection Cap and Power On
    Carefully remove the protective cap from the measurement pins. Press the "力" button to turn on the device.
  2. Step 2: Select Wood Group
    「モード" button to cycle through the available wood groups (A, B, C, D) until the appropriate group for your material is selected. Refer to the "Wood Group Selection" section for details.
  3. Step 3: Take Measurement
    Gently push the measurement pins into the material (wood, paper, cardboard) to be tested. Ensure the pins penetrate sufficiently for a stable contact. The moisture reading will be displayed on the LCD screen.
  4. Step 4: Hold Reading (Optional)
    Once the reading stabilizes, press the "所有" button to freeze the displayed value. This allows you to record the measurement after removing the pins from the material. Press "所有" again to release the reading.
  5. ステップ5: 電源を切る
    「力" button to turn off the device. The meter also features an automatic power-off function after approximately 15 minutes of inactivity to conserve battery life.
Proster RZMT-10 MD Moisture Meter in use, showing various applications like measuring wood, bamboo, and lumber.
図3: Examples of the Proster RZMT-10 MD Digital Wood Moisture Meter in use. The image illustrates the meter measuring moisture in different wood types and materials.
Proster RZMT-10 MD Moisture Meter held in a hand, demonstrating its compact size.
図4: The compact size of the Proster RZMT-10 MD Digital Wood Moisture Meter, shown held comfortably in a hand.

Wood Group Selection

The meter has four pre-programmed wood groups (A, B, C, D) to provide accurate readings for approximately 50 different wood species. Select the group that best matches the material you are testing.

Table 1: Wood Species Group Table
グループ木材の種類
Aチーク、クルミ、アフロモシア、ゴムの木
Bケルイング、ホワイトポプラ、ブナ、スギ、トラ
Cラワン、トネリコ、ニレ、モミ、カエデ、パダウ、トラ
Dシナノキ、カラマツ、マツ、バーチ

メンテナンス

クリーニング：

  • Wipe the meter's housing with a soft, dry cloth.
  • 研磨剤や溶剤は使用しないでください。
  • Ensure the measurement pins are clean and free of debris for accurate readings.

ストレージ：

  • Always replace the protective cap over the measurement pins when not in use to prevent damage and injury.
  • デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
  • 長期間保管する場合は、液漏れを防ぐために 9V 電池を取り外してください。

トラブルシューティング

一般的な問題と解決策:

  • ディスプレイが表示されない / デバイスが起動しない:
    • 9V 電池が正しい極性で正しく取り付けられているかどうかを確認します。
    • 9V 電池が消耗している場合は交換してください。
  • 不正確な読み取り:
    • Ensure the measurement pins are clean and fully inserted into the material.
    • Verify that the correct wood group (A, B, C, D) is selected for the material being tested.
    • Ensure the material surface is free of moisture or contaminants that could affect readings.
    • The device is designed for wood, paper, and cardboard. Using it on other materials may yield inaccurate results.
  • "LOW BATTERY" Indicator:
    • Replace the 9V battery immediately to ensure continued accurate operation.

仕様

表2：製品仕様
特徴詳細
測定原理電気抵抗
測定範囲0% ~ 99.9% wood
解決0.1%
正確さ±0.5%
電極の長さ10mm（0.4インチ）
Electrode Pins統合された
自動電源オフ約後。 15分間の非アクティブ
Meter Housing MaterialABSプラスチック
動作温度0℃ ~ 40℃ (32°F ~ 104°F)
動作湿度85% Relative Humidity Maximum
寸法（長さ×幅×高さ）145 x 67 x 32mm（5.71 x 2.64 x 1.26 inches）
重さ140グラム
色オレンジ
電源1Vバッテリー9個（付属）
Proster RZMT-10 MD Moisture Meter with dimensions labeled: 2.64 inches width, 1.26 inches depth, 5.71 inches height.
図5: Dimensions of the Proster RZMT-10 MD Digital Wood Moisture Meter. The image shows the device with its width (2.64 inches), depth (1.26 inches), and height (5.71 inches) clearly marked.
Close-up of the Proster RZMT-10 MD Moisture Meter's measurement pins, highlighting accurate measuring capabilities.
図6: 閉じる view of the measurement pins, emphasizing the meter's accurate measuring capabilities with a range of 0-99.9%, resolution of 0.1%, and accuracy of ±0.5%.

保証情報

Specific warranty details for the Proster RZMT-10 MD Digital Wood Moisture Meter are typically provided with the product packaging or on the manufacturer's official website. Please refer to these sources for the most accurate and up-to-date warranty terms and conditions. Generally, warranties cover defects in materials and workmanship under normal use. Keep your purchase receipt as proof of purchase.

サポート

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Proster RZMT-10 MD Digital Wood Moisture Meter, please contact Proster customer support. Contact information can usually be found on the product packaging, the official Proster webサイト、または製品を購入した小売店を通じて購入できます。