1. はじめに
Thank you for choosing the Arrow Fastener ET200BN Electric Brad Nailer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.
Figure 1: The Arrow Fastener ET200BN Electric Brad Nailer, showing its ergonomic design and power cord.
2. 安全に関する注意事項
このツールを使用する際は、火災、感電、および人的傷害のリスクを軽減するために、常に基本的な安全上の注意事項に従ってください。
- すべての指示をお読みください: ツールの操作と潜在的な危険性についてよく理解しておいてください。
- 目の保護具を着用してください: Always wear safety glasses or goggles that comply with ANSI Z87.1.
- 聴覚保護具を着用してください： 騒音に長時間さらされると聴覚障害を引き起こす可能性があります。
- 作業エリアを清潔に保つ: 雑然としたエリアは事故を招きます。
- 爆発性雰囲気中では操作しないでください。 可燃性の液体、ガス、または粉塵がある場所でこのツールを使用しないでください。
- ワークピースの固定: Always secure the material you are working on.
- Avoid accidental firing: Keep fingers away from the trigger when not actively fastening.
- 電源を切る: Always unplug the tool before clearing jams, performing maintenance, or when not in use.
- Use correct fasteners: Only use 18 Ga. brad nails from 5/8" to 1-1/4" as specified for this model.
- 使用前にツールを検査してください: 破損した部品、ずれ、または動作に影響を与える可能性のある状態がないか確認します。
3. パッケージ内容
以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。
- Arrow Fastener ET200BN Electric Brad Nailer
- 収納ケース
- 取扱説明書
4 製品の特徴
The Arrow Fastener ET200BN Electric Brad Nailer is designed for various fastening tasks, offering convenience and precision.
- Adjustable Impact Control Nozzle: Allows for precise setting of brad nails.
- ファスナーの互換性: Fires 18 Ga. brad nails from 5/8" to 1-1/4" (e.g., BN1810, BN1812, BN1816, BN1820).
- 軽量設計: Enhances user comfort and reduces fatigue during extended use.
- Overmold Comfort Grip: 安全で快適なホールド感を提供します。
- Easy Access Magazine Release: Facilitates quick and efficient reloading of brad nails.
- 耐久性のある構造: Made in Taiwan, ensuring quality and reliability.
図 2: 拡大図 view of the ET200BN, highlighting the adjustable impact control nozzle and comfort grip.
5. セットアップ
5.1 Loading Brad Nails
- ツールが電源から外されていることを確認してください。
- Locate the easy access magazine release button, typically near the base of the handle.
- Press the magazine release button and pull the magazine open.
- Insert a strip of 18 Ga. brad nails into the magazine with the points facing forward.
- Slide the magazine closed until it locks securely.
5.2 Adjusting Impact Control
The adjustable impact control nozzle allows you to control the depth at which the brad nails are driven. Turn the knob clockwise for deeper penetration and counter-clockwise for shallower penetration. Test on a scrap piece of material to achieve the desired depth.
6. 操作手順
6.1 一般的な操作
- Ensure the tool is loaded with the correct brad nails and the impact control is set.
- Plug the tool into a suitable 14A power outlet.
- Place the nose of the nailer firmly against the workpiece where you want to drive a nail. Ensure the tool is held perpendicular to the surface.
- Press the trigger to fire a brad nail. The tool will drive the nail and reset for the next shot.
- 各ショットの後にトリガーを放します。
- When finished, unplug the tool from the power source.
6.2 ベストプラクティス
- Always test the nailer on a scrap piece of material before working on your main project.
- ツールをしっかりと握り、ワークピースに一定の圧力をかけます。
- Avoid firing into knots or extremely hard materials, which can cause jams or damage to the tool.
- Do not attempt to drive nails into metal or concrete.
7. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your ET200BN Electric Brad Nailer.
- クリーニング： Keep the tool clean and free of dust and debris. Use a dry cloth to wipe down the exterior. Do not use solvents.
- 潤滑: The tool is designed for maintenance-free operation regarding lubrication. Do not apply oil to the internal mechanisms unless specifically instructed by Arrow Fastener.
- コード検査： Regularly inspect the power cord for any signs of damage, cuts, or fraying. Replace a damaged cord immediately.
- ストレージ： Store the tool in its included storage case in a dry, secure location, out of reach of children.
8。 トラブルシューティング
Before attempting any repairs, always unplug the tool from the power source.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ツールは起動しません。 | Not plugged in; no nails in magazine; safety mechanism not engaged; internal fault. | Check power connection; load nails; ensure nose is pressed firmly against workpiece; contact customer support if problem persists. |
| 釘が頻繁に刺さります。 | Incorrect nail size; damaged nails; magazine issue; firing into hard material. | Use correct 18 Ga. brad nails (5/8" to 1-1/4"); inspect nails for damage; clear jam (unplug first); avoid knots/hard materials. |
| Nails not driven flush. | Impact control set too low; insufficient pressure on tool; material too dense. | Adjust impact control knob clockwise; apply more firm pressure to the tool; consider a different fastening method for very dense materials. |
9. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | ET200BN |
| ファスナータイプ | 18 Gauge Brad Nails |
| Fastener Lengths | 5/8" to 1-1/4" (BN1810, BN1812, BN1816, BN1820) |
| 電源 | Electric (14A) |
| 製品寸法 | 13.3 x 3.4 x 12.6インチ |
| アイテム重量 | 6ポンド |
| メーカー | 矢印ファスナー |
| 電池が必要 | いいえ |
10. 保証とサポート
For warranty information, please refer to the documentation included with your purchase or visit the official Arrow Fastener website. If you require technical assistance, replacement parts, or have questions regarding the operation of your ET200BN Electric Brad Nailer, please contact Arrow Fastener customer support directly.
メーカー: 矢印ファスナー
Webサイト： www.arrowfastener.com （元amp（リンクは変更される場合があります）