1. はじめにview
The Massive Audio SUMMOXL104 is a high-performance 10-inch subwoofer designed for car audio systems. It features a dual 4 Ohm voice coil configuration, allowing for flexible wiring options to match various amplifier setups. This subwoofer is engineered to deliver powerful and accurate bass reproduction, enhancing your in-car audio experience. Proper installation and configuration are crucial for optimal performance and longevity.
画像1.1：正面 view of the Massive Audio SUMMOXL104 10-inch Subwoofer.
2. パッケージ内容
インストールを続行する前に、パッケージにすべてのアイテムが揃っていることを確認してください。
- Massive Audio SUMMOXL104 10 Inch Subwoofer (1 unit)
3. 仕様
Refer to the following specifications for detailed information about your SUMMOXL104 subwoofer:
| 特徴 | 仕様 |
|---|---|
| ブランド | Massive Audio |
| モデル番号 | SUMMOXL104 |
| サブウーファーの直径 | 10インチ |
| ピーク電力処理 | 3000ワット |
| RMS電力処理 | 1500ワット |
| インピーダンス | デュアル 4 オーム |
| 周波数応答 | 250 Hz（上限） |
| 取り付け深さ | 6.81インチ |
| 取付幅 | 9.21インチ |
| 商品の寸法（奥行き x 幅 x 高さ） | 奥行き10.6インチ x 幅10.6インチ x 高さ7.4インチ |
| アイテム重量 | 11.9 ポンド |
| エンクロージャ材質 | アルミニウム |
| 接続技術 | 有線 |
The subwoofer features a red stitched edge to the cone for added strength and a black anodized one-piece pole-plate for enhanced motor force.
画像3.1: 上 view highlighting the cone and surround construction.
4. セットアップとインストール
Proper installation is critical for the performance and safety of your subwoofer. It is highly recommended that installation be performed by a qualified car audio professional.
4.1 筐体要件
The SUMMOXL104 subwoofer requires a suitable enclosure for optimal sound reproduction. Consult with a car audio specialist or refer to recommended enclosure designs for sealed or ported configurations that match the subwoofer's parameters and your vehicle's acoustics.
4.2 配線構成
The SUMMOXL104 features a dual 4 Ohm voice coil. This allows for several wiring options to achieve different final impedance loads at your amplifier. Common configurations include:
- 1オーム負荷: Wire both 4 Ohm voice coils in parallel.
- 8オーム負荷: Wire both 4 Ohm voice coils in series.
あなたの amplifier is stable and capable of driving the chosen impedance load. Incorrect wiring can damage both the subwoofer and the amplifier。
4.3 取り付け
Securely mount the subwoofer within its enclosure using appropriate hardware. Ensure there is adequate clearance for the subwoofer's excursion and that the mounting surface is rigid to prevent vibrations and rattles.
図4.1: 例ample of a SUMMOXL104 subwoofer installed in a vehicle trunk.
Image 4.2: Multiple SUMMOXL104 subwoofers in a custom installation.
Image 4.3: Subwoofers and amplifiers integrated into a trunk setup.
Image 4.4: Professional installation of multiple subwoofers.
5. 操作手順
5.1 慣らし期間
Allow a break-in period of approximately 20-30 hours of normal listening at moderate volumes before operating the subwoofer at its maximum potential. This allows the suspension components to loosen and achieve optimal performance.
5.2 Amplifier Matching and Gain Settings
あなたの amplifier's RMS power output matches the subwoofer's RMS power handling (1500 Watts). Set the amplifier gain correctly to prevent clipping and distortion, which can damage the subwoofer. Use a digital multimeter or an oscilloscope for accurate gain setting, or consult a professional.
5.3 クロスオーバー設定
あなたの amplifier's or head unit's low-pass filter (LPF) to send only low frequencies to the subwoofer. A typical LPF setting for a 10-inch subwoofer is between 60Hz and 100Hz, with a slope of 12dB or 24dB per octave. Adjust this setting to blend seamlessly with your main speakers.
6. メンテナンス
The SUMMOXL104 subwoofer requires minimal maintenance. Periodically inspect the subwoofer for any signs of damage to the cone, surround, or dust cap. Ensure all wiring connections are secure and free from corrosion. Clean the subwoofer's exterior with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
7。 トラブルシューティング
If you experience issues with your subwoofer, perform the following basic checks:
- 音が出ない: Check all power, ground, and signal connections. Verify the amplifier is powered on and not in protection mode. Ensure the head unit is sending an audio signal.
- 歪んだ音: 減らす amplifier gain. Check for proper crossover settings. Inspect the subwoofer cone and surround for physical damage. Ensure the enclosure is sealed properly if it's a sealed design.
- 弱い低音: Verify correct wiring impedance for your ampライフファイア。チェック amplifier gain and crossover settings. Ensure the enclosure volume is appropriate for the subwoofer.
- 過熱： 十分な換気を確保し、 amplifier. Verify the impedance load is within the amplifier's stable operating range. Reduce prolonged high-volume playback.
If problems persist after performing these checks, consult a qualified car audio technician.
8. 公式製品ビデオ
公式製品ビデオをご覧くださいview of Massive Audio products and their applications.
Video 8.1: Massive Audio promotional video showcasing various products and installations.
9. 保証とサポート
The Massive Audio SUMMOXL104 subwoofer comes with a 1年間の限定保証 from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, abuse, accident, neglect, or unauthorized modifications.
For warranty claims or technical support, please contact Massive Audio customer service through their official webご購入はサイトまたは正規販売店までお問い合わせください。保証の有効性を確認するため、購入証明書を保管してください。