DIRECTV AC Adapter Power Supply Charger EPS10R1-16 User Manual

導入

This manual provides essential instructions for the safe and effective use of your DIRECTV AC Adapter Power Supply Charger, Model EPS10R1-16. This power supply is designed as a direct replacement for various DIRECTV devices requiring a 12V, 1.5A, 18W power source.

Image: The DIRECTV AC Adapter Power Supply Charger EPS10R1-16, showing the main unit and connected cables.

重要な安全上の注意事項

• 屋内使用のみ: This device is intended for indoor use in dry locations. Do not expose to water, rain, or excessive moisture.
• 適切な音量tage: 壁のコンセントvolを確認してくださいtageは入力ボリュームと一致しますtage specified on the adapter (120V AC).
• 換気： Do not cover the power adapter or place it in an enclosed space that restricts airflow. Adequate ventilation is necessary to prevent overheating.
• ケーブルの完全性: Regularly inspect the power cord for damage. Do not use if the cord is frayed, cut, or otherwise damaged.
• 電源を切る: Always unplug the adapter from the wall outlet before cleaning or if it will be unused for an extended period.
• 過負荷を避ける: Do not overload electrical outlets or extension cords, as this can result in a risk of fire or electric shock.
• 子供とペット: Keep the power adapter and cables out of reach of children and pets to prevent accidental damage or injury.

設定

Follow these steps to properly set up your DIRECTV AC Adapter:

1. Identify Your Device: Confirm that your DIRECTV receiver (e.g., C31, C41, C41W, H25), DIRECTV STREAM Device, wireless video bridge, or broadband DECA requires a 12V, 1.5A power supply. This adapter is a direct replacement for EPS10Rx-xx models.
2. DC出力を接続: Locate the DC input port on your DIRECTV device. Insert the small barrel connector from the power adapter firmly into this port.

画像: クローズアップ view of the DC output barrel connector of the DIRECTV AC Adapter, ready for connection to a device.

3. AC入力を接続: Plug the two-prong AC input plug of the power adapter into a standard 120V AC wall outlet. Ensure the connection is secure.

Image: The DIRECTV AC Adapter showing its label with electrical specifications (Model: EPS10R1-15, Output: 12V 1.5A 18W) and UL listing.

オペレーティング

Once properly connected, the power adapter will supply power to your DIRECTV device. No further operational steps are typically required for the adapter itself.

• 電源インジケーター: Some DIRECTV devices may have a power indicator light. Observe your device to confirm it is receiving power.
• 安定した接続: Ensure all connections remain firm to prevent intermittent power supply.

メンテナンス

適切なメンテナンスを行うことで、電源アダプターの寿命が長くなり、安全に動作することが保証されます。

• クリーニング： 清掃する前に、アダプターをコンセントから抜いてください。表面は柔らかく乾いた布で拭いてください。液体クリーナーやスプレーは使用しないでください。
• ストレージ： 使用しないときは、直射日光や極端な温度を避け、涼しく乾燥した場所にアダプターを保管してください。損傷を防ぐため、ケーブルを強く巻き付けないでください。
• ケーブル管理 Do not place heavy objects on the power cord or adapter. Avoid bending or crimping the cables sharply.

トラブルシューティング

If you experience issues with your power adapter, consider the following:

• デバイスに電源が供給されていません:
  • Verify that the AC input plug is securely inserted into a working wall outlet.
  • Check that the DC output barrel connector is fully inserted into your DIRECTV device's power input port.
  • Try plugging another device into the same wall outlet to confirm the outlet is functional.
  • Inspect the power cord for any visible damage. If damaged, discontinue use and replace the adapter.
• デバイスが正しく機能しない:
  • Ensure this EPS10R1-16 adapter is the correct model for your specific DIRECTV device. Refer to your device's manual for its power requirements.
  • Confirm the device itself is not faulty by testing it with a known working power supply (if available and compatible).

仕様

保証とサポート

For warranty information or technical support regarding your DIRECTV AC Adapter Power Supply Charger, please refer to the documentation provided with your original DIRECTV device or contact your product retailer or DIRECTV customer service directly.