エコーギア スリムView TVウォールマウント取扱説明書

1.製品オーバーview

ECHOGEAR スリムView TV Wall Mount provides a secure and minimalist solution for mounting your television. Its low-profile design ensures your TV sits close to the wall, enhancing the aesthetic of your living space. This manual provides detailed instructions for proper installation and use.

2.インストールガイド

Follow these steps carefully to ensure a safe and secure installation of your ECHOGEAR SlimView TV Wall Mount.

2.1. 公式インストールビデオ

For a visual guide, please watch the official installation video below:

2.2. パッケージ内容

始める前に、パッケージにすべてのコンポーネントが含まれていることを確認してください。

2.3. テレビブラケットの取り付け

Securely attach the vertical TV brackets to the back of your television using the appropriate screws from the hardware kit. Ensure they are aligned with your TV's VESA mounting holes.

2.4. Wall Plate Assembly and Mounting

Assemble the wall plate components if necessary, then mark and drill pilot holes on your wall. Secure the wall plate to the wall using the provided lag bolts. This mount is compatible with:

• 16-inch wood studs
• 24-inch wood studs
• Poured concrete walls
• Concrete block walls

2.5. テレビを吊り下げる

Carefully lift your television and hook the TV brackets onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the bottom of the wall plate, securing it in place. Listen for an audible 'click' to confirm the security system is engaged.

2.6. VESA互換性

This mount supports the following VESA patterns:

• 200x100
• 200x200
• 300x200
• 300x300
• 400x200
• 500x200
• 400x300
• 400x400
• 500x400
• 600x400

3. 操作

3.1. Accessing Cables

To access cables behind your television, utilize the quick-release pull strings located at the bottom of the TV brackets. Pulling these strings will disengage the TV from the wall plate, allowing you to tilt the TV forward for cable management without fully removing it from the wall.

3.2.ケーブル管理

For a tidy installation, consider using ECHOGEAR cable management accessories to route and conceal your television's cables.

4. メンテナンス

To ensure the long-term stability and safety of your TV mount, periodic maintenance is recommended:

• 接続を確認してください: Annually inspect all screws and bolts securing the mount to the wall and the TV to the mount. Tighten any that may have loosened over time.
• 表面をきれいにする: マウントの清掃には、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤は使用しないでください。
• 損傷の検査: Regularly check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, contact ECHOGEAR customer support immediately.

5。 トラブルシューティング

インストール中またはインストール後に問題が発生した場合は、次の一般的なトラブルシューティングのヒントを参照してください。

• テレビが水平でない: Ensure the wall plate is perfectly level before drilling. Some mounts allow for minor post-installation leveling adjustments. If not, you may need to re-adjust the wall plate.
• Difficulty Hanging TV: Ensure the TV brackets are correctly aligned with the wall plate. Two people are recommended for safely lifting and hanging the TV.
• Cables Difficult to Access: ロープロfile design means limited space behind the TV. Utilize the pull-string release mechanism to tilt the TV forward for better access. Consider using right-angle HDMI adapters if space is extremely tight.
• マウントが緩んでいるように感じる: Immediately remove the TV and re-check all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate concrete anchors. Do not re-hang the TV until the mount is completely stable.

If problems persist, please contact ECHOGEAR customer support for assistance.

6. 製品仕様

7. 保証とサポート

ECHOGEAR stands behind the quality of its products. This TV wall mount comes with a 5年間保証.

For any questions, technical assistance, or warranty claims, please contact our US-based customer support team. Our experts are available 7 days a week to provide assistance.

Customer Support Phone: 1-855-428-2490

You can also refer to the full Installation Manual (PDF) for more detailed information: PDFマニュアルをダウンロード