1. はじめに
Thank you for choosing the AMIR Upgraded 3.15-inch Motion Sensor LED Night Light. This cordless, battery-powered light is designed to provide convenient and efficient illumination in various indoor spaces. Its advanced PIR motion and light sensors ensure light is only activated when needed, conserving battery life. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Image 1: AMIR Motion Sensor Light providing illumination under a kitchen cabinet.
2 製品の特徴
- 強化されたデザイン: Features a 15% larger design and 30% increased brightness compared to previous models.
- PIR Motion & Light Sensor: Automatically turns on when motion is detected within 10 feet in dark conditions and turns off after 15 seconds of no motion.
- 簡単なインストール: No hard-wiring required. Equipped with adhesive pads and a built-in magnet for versatile placement.
- 電池式: Cordless operation using 3 AAA batteries (not included), ideal for areas without electrical access.
3. パッケージ内容
パッケージには以下のアイテムが含まれています:
- 6 x AMIR Motion Sensor Light units
- 6 x Iron Sheets with Strong Adhesive Tape
- ユーザーマニュアル x 1
4. セットアップとインストール
4.1. バッテリーの取り付け
- Gently twist the back cover of the light unit counter-clockwise to open it.
- Insert 3 AAA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- Align the back cover with the unit and twist clockwise to securely close it.
Image 2: Illustration of battery installation process.
4.2. ライトの取り付け
The AMIR Motion Sensor Light offers two convenient mounting options:
- 磁気アタッチメント: The light has a built-in magnet. Simply attach it to any ferrous metal surface.
- 粘着パッド: For non-metal surfaces, use the provided iron sheets with strong adhesive tape. Peel off the protective film from the adhesive, stick the iron sheet to your desired clean, dry surface, and then magnetically attach the light to the iron sheet.
Image 3: Demonstrating magnetic and adhesive installation methods.
4.3. Important Installation Guidelines
- This product activates only in dark spaces. Its light sensor detects ambient brightness and remains off in well-lit conditions. Therefore, install in dim/dark areas.
- Never mount the light fixture in high-temperature zones, as heat weakens the adhesive and causes the fixture to detach. Installation in room-temperature environments is recommended to ensure secure, long-lasting adhesion.
- Avoid mounting two lights too close together, as this may interfere with their motion sensing capabilities.
- Do not face the lights towards vents or mount them in moist places.
Image 4: Scenarios to avoid during installation for optimal performance.
5. 操作手順
AMIR モーションセンサーライトは、自動ハンズフリー操作用に設計されています。
- 自動アクティベーション： The light will automatically turn on when its PIR motion sensor detects movement within approximately 10 feet (3 meters) in a dark environment.
- 自動非アクティブ化: The light will automatically turn off approximately 15 seconds after no motion is detected. This feature helps prolong battery life.
- 光センサー機能: The integrated light sensor ensures the unit only activates in low-light conditions, preventing unnecessary illumination during daylight hours.
Image 5: Visual explanation of the light and motion sensor operation.
Video 1: Official product video demonstrating the features and installation of the AMIR Motion Sensor Light. It shows the light activating with motion and its compact design.
6. メンテナンス
6.1. バッテリーの交換
When the light output diminishes or the unit stops activating, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always replace all 3 AAA batteries at once with new ones for optimal performance.
6.2. 清掃
To clean the light unit, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しません。 | 1. Batteries are dead or incorrectly inserted. 2. 周囲の光が明るすぎる。 3. No motion detected within range. | 1. 極性が正しいことを確認して電池を交換します。 2. Move the light to a darker area. 3. Ensure motion occurs within 10 feet of the sensor. |
| ライトが頻繁に点灯します。 | 1. Placed in a high-traffic area. 2. Interference from other light sources or heat. | 1. Relocate the light to a less active area. 2. Ensure the light is not near heat sources or facing vents. |
| 取り付け面から光が落ちます。 | 1. Adhesive weakened by heat or improper application. 2. Surface not clean or dry. | 1. Reapply adhesive to a clean, room-temperature surface. 2. Ensure surface is clean and dry before applying adhesive. |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | アミール |
| モデル番号 | モーションセンサーライト |
| 光源の種類 | 導かれた |
| 電源 | 電池式（単4電池3本、別売） |
| スイッチタイプ | PIR Motion & Light Sensor |
| モーションセンサー範囲 | 最大10フィート（3メートル） |
| 自動オフ時間 | 15秒（動きがない状態から） |
| 取り付けタイプ | Wall Mount (Adhesive/Magnetic) |
| 製品寸法 | 3.15 inches (Base Diameter) |
| アイテム重量 | 1.76オンス |
| 材質タイプ | プラスチック |
| 屋内/屋外での使用 | 屋内使用のみ |
Image 6: Lighting Facts for the AMIR Motion Sensor Light.
9. 保証とサポート
This AMIR Motion Sensor Light comes with a 1年間のメーカー保証. For any product inquiries, technical support, or warranty claims, please contact AMIR customer service through the retailer's platform or visit the official AMIR web連絡先情報のサイト。
