InnoGear MU01 Microphone Boom Arm Stand Instruction Manual

導入

This manual provides detailed instructions for the setup, operation, and maintenance of your InnoGear MU01 Microphone Boom Arm Stand. Please read this manual thoroughly before use to ensure proper installation and optimal performance.

パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• 1×ブームアーム
• デスクマウントCl x 1amp
• 1 x Standard Microphone Clip
• 5/8インチから3/8インチのネジアダプター×1
• 5 xケーブルタイ

Image: All components included in the InnoGear MU01 Microphone Boom Arm Stand package.

セットアップ手順

Follow these steps to correctly set up your microphone boom arm stand.

1. Attach Desk Mount Clamp

デスクclamp is designed to securely grip flat desk edges up to 2 inches (5cm) in thickness. Ensure your desk edge is flat, not slanted or curved, for optimal stability.

1. Unscrew the knob on the desk mount clamp 十分に開ける。
2. clを配置するamp on a suitable flat edge of your desk.
3. ノブをClまで締めますamp しっかりと机に固定してください。締めすぎないでください。

Image: Illustration of desk clamp compatibility, showing suitable flat edges and unsuitable slanted/curved edges.

2. Insert Boom Arm into Desk Mount

Insert the base of the boom arm into the hole on the top of the desk mount clamp. Tighten the side screw on the clamp to secure the boom arm in place. This allows for 360° rotation.

Video: Demonstrates the installation of the microphone boom arm onto the desk clamp and attachment of a microphone.

3. Attach Microphone

The boom arm comes with a standard microphone clip and a 5/8" to 3/8" adapter for broad compatibility.

• For dynamic microphones (e.g., Shure SM58, Samson Q2U, Shure PGA48), use the provided standard microphone clip. Screw the clip onto the threaded end of the boom arm.
• For condenser microphones (e.g., Blue Yeti, Blue Snowball, HyperX QuadCast, Shure SM7B, Fifine AM8), use the 5/8" to 3/8" adapter. Screw the adapter onto the boom arm's thread, then attach your microphone or its shock mount to the adapter.

Image: Visual guide for attaching different types of microphones using the standard clip or the 5/8" to 3/8" screw adapter.

4.ケーブル管理

Use the included cable ties to secure your microphone cable along the boom arm. This helps maintain a tidy setup and prevents cables from interfering with arm movement.

操作手順

The InnoGear MU01 boom arm offers extensive adjustability for precise microphone positioning.

• ベース回転: The arm can rotate 360° at the desk mount. Loosen the screw on the desk clamp slightly to adjust the horizontal position, then re-tighten.
• 腕の伸展と角度: The arm features 135° back and forth extension and 180° up-and-down movement. Adjust the arm segments to achieve your desired microphone height and reach.
• マイクの角度: The metal adapter allows for 270° rotation, enabling you to angle your microphone precisely towards the sound source.
• 耐荷重: The stand has a load-bearing capacity of 3.3 lbs (1.5 kg). For heavier microphones, utilize the extra positioning hole on the arm shaft to boost load support and prevent spring deformation.

Image: Demonstrates the full range of motion and adjustability of the boom arm, including 270° microphone rotation, 180° arm shaft movement, and 360° base rotation.

Image: Shows the two positioning screw options for securing the arm, with the second hole providing extra support for heavier microphones.

メンテナンス

To ensure the longevity and smooth operation of your InnoGear MU01 boom arm, consider the following maintenance tips:

• Regularly check all screws and joints for tightness. Re-tighten as necessary to maintain stability.
• Keep the arm clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners that could damage the finish.
• If the arm's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the joints.
• Ensure springs are free from obstruction and not bent or damaged. The unique design helps prevent spring deformation, but regular inspection is advised.

トラブルシューティング

If you encounter any issues with your InnoGear MU01 Microphone Boom Arm Stand, refer to the following common solutions:

仕様

• モデル： MU01
• 材料： 合金鋼
• 色： 黒
• 商品の重量: 1.35ポンド（0.61kg）
• 製品寸法: 15 x 1.5 x 4 インチ (38.1 x 3.8 x 10.16 cm)
• 最大耐荷重： 3.3ポンド（1.5kg）
• デスクClamp 厚さ: 最大2インチ（5 cm）
• 互換性: Microphones with 5/8" or 3/8" thread (adapter included)

保証とサポート

InnoGear products are designed for durability and performance. For specific warranty details and customer support, please refer to the official InnoGear web当サイトをご覧いただくか、販売店にお問い合わせください。保証請求のために購入時の領収書を保管してください。

さらにサポートが必要な場合は、次のサイトを参照してください。 InnoGear Store on Amazon.