Acer H5382BD 720P 3D DLP Home Theater Projector User Manual

導入

The Acer H5382BD 720P 3D DLP Home Theater Projector in white. This image shows the front view of the projector, highlighting its lens and ventilation grilles.

This manual provides detailed instructions for the setup, operation, and maintenance of your Acer H5382BD 720P 3D DLP Home Theater Projector. Please read this manual thoroughly before using the projector to ensure proper and safe operation.

重要な安全情報

• 通気口を塞がないでください。 過熱を防ぐためにプロジェクターの周囲に適切な空気の流れを確保してください。
• レンズが目に直接触れないようにしてください。 プロジェクターlamp is extremely bright and can cause eye damage.
• 指定された電源のみを使用してください: プロジェクターを電圧に合った電源コンセントに接続しますtage and current ratings indicated on the product.
• 水や湿気を避けて保管してください: プロジェクターを雨、湿気、または過度の湿度にさらさないでください。
• lを処理しますamp 注意して： プロジェクターlamps can be hot and contain mercury. Refer to the maintenance section for lamp 交換。
• Position securely: Place the projector on a stable, level surface or mount it securely to prevent accidental falls.

箱の中身

セットアップを続行する前に、すべての項目が揃っていることを確認してください。

• Acer H5382BD Projector
• HDMIケーブル
• キャリーバッグ
• 電源コード（明示的には記載されていないが、操作に必要）
• Remote Control (not explicitly listed but implied for operation)
• ユーザーマニュアル（このドキュメント）

設定

1. プロジェクターの配置

Optimal placement is crucial for the best viewing experience. Consider the distance from the screen or wall, as this affects image size. The projector is designed for home cinema use and can project a large image even in moderately lit rooms due to its 3300 ANSI Lumens brightness.

For a 70-80 inch screen size, a distance of approximately 10 feet from the wall is recommended. Ensure the projector is stable and level.

2.デバイスの接続

The Acer H5382BD offers multiple connectivity options:

• HDMI/MHL: Connect your Blu-ray player, gaming console, or streaming device using the provided HDMI cable. MHL (Mobile High-Definition Link) allows connection to compatible mobile devices.
• USB： For certain media playback or service functions.
• VGA： VGA ケーブルを使用して古いコンピューターまたはデバイスを接続します。

After connecting your devices, ensure they are powered on before turning on the projector.

3. Powering On and Initial Adjustment

1. 電源コードをプロジェクターと適切な電源コンセントに接続します。
2. プロジェクターまたはリモコンの電源ボタンを押して電源を入れます。
3. 画像が鮮明になるまでプロジェクター レンズのフォーカス リングを調整します。
4. Use the keystone correction function (usually via remote or on-projector buttons) to square the image if it appears trapezoidal.

4. Wireless Projection Setup

The Acer H5382BD supports wireless projection, allowing you to cast content from compatible devices without cables. This feature typically requires an Acer wireless dongle (MWA3 or UWA3, sold separately) and the Acer eDisplayPro application.

1. ワイヤレスモードに切り替える: On your projector, switch the input source to the wireless mode. This is usually done via the 'Source' or 'Input' button on the remote or projector.
2. Launch Acer eDisplayPro: On your mobile device (smartphone or tablet), launch the Acer eDisplayPro application. If you don't have it, download it from your device's app store.
3. Project Content: Within the eDisplayPro app, select the content you wish to project (e.g., photos, videos, documents) and initiate the projection. The content from your device will then be displayed on the projector screen.

プロジェクターの操作

1. Menu Navigation and Input Selection

Use the remote control to access the projector's on-screen display (OSD) menu. Navigate using the arrow keys and confirm selections with the 'Enter' or 'OK' button. The 'Source' or 'Input' button allows you to switch between connected devices (HDMI, VGA, Wireless).

2. Image and Color Settings

• eColor Boost 3D: This technology enhances color performance, providing bright and natural colors. It also includes wall-color compensation, allowing for good image quality even when projecting onto colored walls.
• ColorSafe II: Designed to prevent color decay over extended periods of projector use, ensuring consistent color quality throughout the product's lifespan.
• 明るさモード: The projector offers different brightness modes. The standard brightness is 3300 ANSI Lumens. An 'Eco mode' is available, which can reduce fan noise and extend lamp life, though it may slightly reduce brightness.

3. 3D機能

The Acer H5382BD supports 3D content. To experience 3D projection, you will need compatible 3D content and active shutter 3D glasses (sold separately). Ensure your 3D source device is correctly configured for 3D output.

メンテナンス

1. ルamp 交換

プロジェクターlamp 寿命は有限です。amp reaches the end of its life, you may notice a decrease in brightness, flickering, or a 'Lamp Failure' message. To replace the lamp:

1. 電源をオフにしてクールダウンする: Turn off the projector and unplug it from the power source. Allow it to cool down completely (at least 30 minutes) before proceeding.
2. Lの位置を特定するamp 区画： Refer to your projector's specific diagram to locate and open the lamp コンパートメントカバー。
3. 古いLを削除amp: lを慎重に緩めますamp module and disconnect any wiring harnesses. Gently pull out the old lamp.
4. 新しいLをインストールamp: 新しいlを挿入するamp module, ensuring it is seated correctly. Reconnect the wiring and secure the screws. Avoid touching the bare bulb with your fingers, as oils can reduce lamp 人生。
5. Lをリセットamp タイマー： After replacement, navigate to the OSD menu to reset the lamp タイマー。

It is recommended to use genuine OEM lamps (e.g., Osram, Philips, Ushio) for optimal performance and longevity. Be cautious of generic or counterfeit lamps, which may not perform as expected or could potentially damage the projector.

2. 清掃

• レンズ： Use a soft, lint-free cloth and a specialized lens cleaning solution to gently wipe the projector lens.
• 換気口: Periodically clean the ventilation openings with a soft brush or compressed air to prevent dust buildup, which can lead to overheating.
• UVフィルター: If accessible, the UV filter may require occasional cleaning to maintain image clarity. Refer to the service manual for specific instructions on accessing and cleaning internal components.

トラブルシューティング

仕様

保証とサポート

保証情報およびテクニカルサポートについては、ご購入時に同梱されているマニュアルを参照するか、Acerの公式サポートサイトをご覧ください。 webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。