MICTUNING 2nd-Gen RGB LED Rock Lights User Manual

1. はじめに

Thank you for choosing MICTUNING 2nd-Gen RGB LED Rock Lights. This kit provides vibrant, customizable lighting for your vehicle's exterior, enhancing visibility and aesthetics. Designed with high-brightness RGB 3-in-1 LEDs, a stable Bluetooth controller, and an IP68 waterproof rating, these lights are built for durability and performance in various conditions. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal use of your product.

画像1.1: 以上view of the MICTUNING 2nd-Gen RGB LED Rock Lights kit, including the 8 LED pods, control box, and wiring.

2. 安全情報

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electrical shock, fire, or serious injury.

• 電気設備の設置を始める前に、必ず車両のバッテリーを外してください。
• 短絡を防止するために、すべての配線接続が安全かつ適切に絶縁されていることを確認してください。
• いかなる場合も製品を改造しないでください。許可されていない改造は保証の対象外となり、安全上のリスクが生じる可能性があります。
• Keep the control box and wiring away from extreme heat, moving parts, and sharp edges.
• インストールプロセスのいずれかの部分について不明な点がある場合は、専門家に相談してください。

3. パッケージ内容

インストールを開始する前に、パッケージにすべてのコンポーネントが含まれていることを確認してください。

• 8 x RGB LED Rock Light Pods
• Bluetoothコントロールボックス x 1
• 配線ハーネス
• Mounting Hardware (screws, nuts, rubber pads)
• ユーザーマニュアル

画像3.1: 詳細 view of all items included in the package, such as the LED pods, control box, wiring, and various mounting accessories.

4. セットアップとインストール

Follow these steps for proper installation of your MICTUNING RGB LED Rock Lights:

1. レイアウトの計画: Determine the optimal placement for each of the 8 LED pods on your vehicle's undercarriage. Consider areas that will provide even illumination and are protected from direct impact.
2. Mounting the Pods: Securely mount each LED pod using the provided screws and rubber pads. Ensure the mounting surface is clean and flat. The sturdy aluminum housing provides durability.
3. Mounting the Control Box: Choose a dry, secure location for the Bluetooth control box, such as under the hood or inside the cabin. Ensure it is easily accessible for wiring and protected from water and excessive heat. The control box features a built-in automotive-grade chip for stable Bluetooth connection.
4. 配線接続:
   • Connect the wiring harnesses from each LED pod to the control box.
   • Connect the main power and ground wires from the control box to your vehicle's 12V power source (e.g., battery). It is recommended to use an inline fuse (a safety protection fuse is included) for circuit protection.
   • Ensure all connections are tight and insulated to prevent corrosion and short circuits.
   

   Image 4.1: The Bluetooth control box, highlighting its internal automotive-grade chip for stable and fast connection.

   

   Image 4.2: A MICTUNING LED rock light submerged in water, demonstrating its IP68 waterproof rating and durable aluminum housing with an integrated safety fuse.

5. 電源を入れてテストします。 Reconnect the vehicle's battery. The lights should briefly illuminate.
6. アプリのダウンロード： Scan the QR code on the control box or in the user manual to download the "Mictuning" app from your smartphone's app store.

5. 操作手順

Your MICTUNING RGB LED Rock Lights are controlled via the exclusive MagicLink App. This app allows for comprehensive customization of your lighting experience.

1. Bluetooth経由で接続： Open the MagicLink App on your smartphone. Ensure Bluetooth is enabled. The app will automatically search for and connect to your MICTUNING control box.
2. 照明モードを選択: The app offers various lighting modes, including:
   • 静的色: カラーホイールを使用して、幅広い色の中から選択します。
   • ダイナミックモード: Select from pre-programmed flashing, strobing, fading, and chasing 効果。
   • 音楽モード: Synchronize the lights with music playing on your phone or through the app's microphone.
   • タイミング機能: Set schedules for the lights to turn on/off automatically.
3. 明るさ調整: Adjust the brightness level to your preference within the app.
4. マルチデバイス制御: The MagicLink App allows you to control multiple sets of MICTUNING lights of the same type (e.g., up to 6 sets of X2 CM Q1 RGB rock lights) from a single phone.

Image 5.1: The MagicLink App interface, showing options for single light or group control, and a color wheel for custom light selection.

6. メンテナンス

Regular maintenance will help prolong the lifespan and performance of your rock lights:

• クリーニング： Periodically clean the LED pods with a soft cloth and mild soap and water. Avoid abrasive cleaners or high-pressure washers directly on the lights.
• 検査： Regularly inspect the wiring for any signs of wear, fraying, or damage. Check all connections to ensure they remain secure.
• 防水性の完全性: While the lights are IP68 waterproof, ensure that the connections to the control box remain dry and free from moisture buildup.

7。 トラブルシューティング

If you encounter issues with your MICTUNING RGB LED Rock Lights, refer to the following common problems and solutions:

8. 仕様

9. 保証とサポート

MICTUNING stands behind the quality of its products. Your MICTUNING 2nd-Gen RGB LED Rock Lights come with a 2年間の保証 購入日より。

If you encounter any issues or have questions regarding your product, please do not hesitate to contact MICTUNING customer support. Our responsive team is committed to assisting you within 24 hours to resolve any problems.

連絡先：

• Visit the official MICTUNING website for support resources and contact details: MICTUNING Store
• Refer to the user manual for additional contact methods.