マニュアル+

PIXEL TW-283N3

Pixel TW-283 N3 Wireless Shutter Remote Control Timer User Manual

Model: TW-283N3 | Brand: PIXEL

1. はじめに

The Pixel TW-283 N3 is a versatile wireless shutter remote control and timer designed for compatible Canon EOS cameras. It offers advanced functionality for various photography scenarios, including single shooting, continuous shooting, Bulb mode, delay shooting, and comprehensive timer schedule shooting. This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance.

2. パッケージ内容

  • TW-283 Transmitter
  • TW-283 Receiver
  • Camera Connecting Cable (N3 type for Canon)
  • ユーザーマニュアル

3.製品オーバーview

Familiarize yourself with the components of the Pixel TW-283 N3 system:

Diagram of Pixel TW-283 N3 Transmitter and Receiver with labeled buttons and LCD screens.

Figure 1: Transmitter (left) and Receiver (right) with key functions labeled.

送信機（TX）

  1. LEDライトインジケーター
  2. 電源スイッチ、バックライト付きボタン
  3. 番号追加ボタン
  4. 左シフトボタン
  5. 設定/確認ボタン
  6. 液晶画面
  7. タイマースケジュール開始/停止ボタン
  8. 数値削減ボタン
  9. 右シフトボタン
  10. Focus Button/Shutter Button

受信機（RX）

  1. LEDライトインジケーター
  2. 電源スイッチ、バックライト付きボタン
  3. 液晶画面
  4. バックライト/チャンネル追加ボタン

4. セットアップ

4.1. バッテリーの取り付け

Both the transmitter and receiver require 2 AAA batteries each (not included). Ensure correct polarity when inserting batteries.

Diagram showing correct AAA battery insertion for both the transmitter and receiver units.

Figure 2: Correct battery insertion for Transmitter and Receiver.

4.2. カメラへの接続

The receiver connects to your camera via the provided N3 connecting cable. Attach the receiver to your camera's hot shoe and plug the cable into the camera's remote control port. The N3 cable is compatible with various Canon EOS models.

Image showing various interchangeable camera connecting cables for different camera brands and models, including N3 for Canon.

Figure 3: Interchangeable connecting cables, including N3 for Canon.

A camera connected to the receiver via a wired connection, demonstrating wired remote control functionality.

Figure 4: Wired connection setup for the remote control.

4.3. Pairing (Channel Setting)

To establish a wireless connection, ensure both the transmitter and receiver are powered on. The devices should automatically pair on the same channel (e.g., CH01). If pairing issues occur, manually set the channel on both units to match.

Two cameras set up with wireless receivers and a user holding a wireless transmitter, demonstrating wireless operation.

Figure 5: Wireless connection setup for the remote control.

5. 操作手順

5.1. 基本的な撮影モード

The TW-283 supports several shooting modes:

  • シングルシューティング： Press the shutter button halfway to focus, then fully press to capture a single image.
  • 1S Continuous Shooting: Captures a series of images at 1-second intervals.
  • バルブ撮影： Allows for long exposures. Press the shutter button once to open the shutter, and again to close it.
  • ディレイ撮影： Set a delay time (1s to 59s) before the shutter is released.
Diagram illustrating four shooting modes: Single Shooting, Continuous Shooting, Bulb Shooting, and Delay Shooting, with corresponding LCD screen displays.

図6：以上view of the four main shooting modes.

Image demonstrating the half-press for focus and full-press for shutter functions on the remote control.

Figure 7: Half-press for focus, full-press for shutter.

5.2. Timer Schedule Shooting

This advanced mode allows you to program a sequence of shots with specific delays, exposure times, intervals, and repeat cycles. Ideal for time-lapse photography or complex long-exposure sequences.

  • 遅れ： Set the initial delay before the first shot.
  • 長さ： Set the exposure time for each shot (for Bulb mode).
  • Intvl: Set the interval between shots.
  • N1: Number of shots in the first group.
  • 繰り返す： Set the interval for repeating the entire sequence.
  • N2: Number of times to repeat the sequence.
Detailed diagram of the Timer Schedule Shooting settings on the remote control's LCD screen, showing options for delay, long exposure, interval, number of shots, and repeat cycles.

Figure 8: Timer Schedule Shooting settings.

6. メンテナンス

  • デバイスを乾燥した状態に保ってください。水や高湿度にさらさないでください。
  • 強い衝撃を与えたり、デバイスを落としたりしないでください。
  • 柔らかく乾いた布で拭いてください。刺激の強い化学薬品は使用しないでください。
  • デバイスを長期間使用しない場合は、電池を取り外してください。

7。 トラブルシューティング

7.1. デバイスの電源が入らない

  • 電池が正しい極性で正しく挿入されているかどうかを確認してください。
  • 新しい単4電池と交換してください。

7.2. No Shutter Response

  • 送信機と受信機の両方の電源がオンになっていることを確認してください。
  • 送信機と受信機が同じチャンネルに設定されていることを確認します。
  • Check if the camera connecting cable is securely plugged into both the receiver and the camera's remote port.
  • Confirm your camera is set to a compatible shooting mode (e.g., single shot, continuous, Bulb).
  • Ensure the camera's remote control interface is correctly identified and used. For some Canon EOS models like 5D Mark IV or 6D Mark II, the interface might be next to the lens.

7.3. Image Blur During Long Exposure

  • Ensure the camera is mounted on a stable tripod.
  • Use the remote control to avoid camera shake from pressing the shutter button directly.

8. 仕様

特徴詳細
モデル番号PX-TW-283N3
製品寸法5.91 x 1.57 x 3.54インチ
アイテム重量3ポンド
ブランドピクセル
特集人間工学に基づいた
サポートされるデバイスの最大数1
対応デバイスカメラ
ワイヤレステクノロジー2.4G伝送
遠隔距離80万以上
チャンネル30

9. Compatible Cameras (N3 Cable)

The Pixel TW-283 N3 is compatible with a wide range of Canon EOS cameras, including but not limited to:

  • EOS R3, EOS R5, EOS R5 C
  • 5DS, 5DS R, 5D, 6D, 7D
  • 1D X, 1D X Mark II, 1DX Mark III
  • EOS 1D, 1D C, 1Ds, 1DS Mark II, 1DS Mark III
  • 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II
  • 5D Mark II, 5D Mark III, 5D Mark IV
  • 7D Mark II, 6D Mark II
  • 50D、40D、30D、20D、10D
  • D60、D30、D2000
  • EOS 1V, EOS-3
  • R5 マークII

Note: Not compatible with Canon EOS R6.

Always check your camera's remote control interface before ordering. If unsure about compatibility, contact customer service.

10. 保証とサポート

For warranty information or technical support, please refer to the official PIXEL web当サイトをご覧いただくか、販売店にお問い合わせください。保証請求のために購入時の領収書を保管してください。