導入
This manual provides essential information for the safe assembly, operation, and maintenance of your tectake Set of 2 Bar Stools, Model Johannes 401561. Please read these instructions carefully before use and retain them for future reference.
安全に関する注意事項
To ensure safe use and prevent injury, please observe the following:
- 必ず付属の説明書に従って組み立ててください。
- Do not use on wet or uneven surfaces to prevent tipping.
- This stool is not intended for use by children.
- Always supervise small children when this stool is in use.
- The maximum recommended weight capacity for this stool is 120 kg. Do not exceed this limit.
パッケージ内容
Before beginning assembly, please ensure all components listed below are present and undamaged:
- 2 x Bar Stools (Johannes Model 401561)
- Assembly Accessories (screws, washers, tools if included)
- 組み立て手順（このマニュアル）
技術仕様
| 特徴 | 仕様 |
|---|---|
| 全高 | 88 – 109 cm (approx.) |
| シート高 | 60 – 81 cm (approx.) |
| 背もたれの高さ | 30cm（約） |
| Seat Surface (Width x Depth) | 約38×40cm |
| Base Plate Diameter | 38cm（約） |
| Footrest to Seat Height | 40cm（約） |
| Foot Support Diameter | 6cm（約） |
| Weight per Stool | 6.5kg（約） |
| 材料 | Faux leather, Chrome steel, Plastic |
| 色 | 黒 |
| 推奨最大重量 | 120キロ |
| 組み立てが必要 | はい |
組み立て手順
Follow these steps carefully to assemble your bar stools. It is recommended to have two people for assembly to ensure stability and ease of handling.
- コンポーネントを解凍します: Carefully unpack all components from the packaging. Verify that all parts listed in the 'Package Contents' section are present and free from damage.
- フットレストを取り付ける: Slide the footrest onto the chrome column. Ensure it is positioned correctly and securely fastened according to the accessory instructions.
- ガスリフトをベースに挿入します。 Place the gas lift cylinder into the central hole of the base plate. The plastic ring on the base plate should be facing downwards to protect your floor.
- シートユニットの取り付け: Carefully place the assembled seat unit onto the top of the gas lift cylinder. Apply gentle pressure until it clicks securely into place.
- 最終チェック: Before full use, test the stability of the stool and the functionality of the height adjustment mechanism. Ensure all connections are tight.
操作手順
高さ調整
The tectake Johannes bar stool features a gas lift mechanism for smooth height adjustment. The lever is located under the seat on the right side.
- シートを上げるには: While standing, lift the lever upwards. The gas lift will extend, raising the seat.
- シートを下げるには: While seated, lift the lever upwards and apply your weight to compress the gas lift, lowering the seat.
Release the lever to lock the seat at your desired height.
スイベル機能
The seat can rotate 360 degrees, providing flexibility and ease of movement. Simply turn the seat in the desired direction.
お手入れとメンテナンス
クリーニング
The faux leather surface and chrome parts are designed for easy cleaning:
- Wipe the faux leather seat with a damp cloth. For more stubborn stains, a mild soap solution can be used.
- Clean chrome parts with a soft, damp 布。
- Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the faux leather and chrome finish.
- Always dry thoroughly after cleaning to prevent water spots or damage.
一般的なケア
- Regularly check all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
- Avoid exposing the stool to direct sunlight or extreme temperatures for prolonged periods, as this may cause material degradation or fading.
- The plastic ring on the base is designed to protect your floor. Ensure it remains intact and clean to prevent scratches.
トラブルシューティング
If you encounter any issues with your tectake bar stools, please refer to the following common problems and solutions:
便が不安定またはぐらぐらする感じ
- 解決： Check all assembly connections. Ensure all screws are tightened securely. Verify that the stool is placed on a flat, even surface. Uneven flooring can cause instability.
高さ調整が機能しない
- 解決： Ensure the gas lift lever is fully engaged when attempting to adjust the height. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support for assistance.
使用中にきしむ音
- 解決： Apply a small amount of silicone spray to moving parts, such as the swivel mechanism or the connections around the gas lift cylinder. Avoid using oil-based lubricants on the gas lift itself.
保証とサポート
For warranty information, technical support, or to inquire about replacement parts, please contact tectake customer service.
You can typically find contact details on the official テクタケ webサイト or through the platform where you purchased the product.
When contacting support, please have your model number (Johannes 401561) and proof of purchase ready to expedite the process.
