1.製品オーバーview
This manual provides essential information for the safe and effective use of the Technical Precision Replacement Bulb, designed as a direct compatible replacement for the OSRAM Sylvania 69316 High Intensity Discharge (HID) bulb. This product is intended for use in compatible fixtures requiring a 200-watt HID bulb.
Figure 1: Technical Precision Replacement Bulb (Model 69316). This image shows a clear, elongated glass bulb with metal caps at both ends, typical of a double-ended HID lamp.
2. 安全情報
Please read and understand all safety warnings before installation or operation. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- 危険： Always disconnect power to the fixture before inspecting, installing, or removing the bulb.
- Allow the bulb and fixture to cool completely before handling. Hot bulbs can cause severe burns.
- Do not touch the glass part of the bulb with bare hands. Oils from skin can reduce bulb life. Use a clean cloth or gloves.
- Ensure the replacement bulb's wattage and type match the fixture's requirements. This bulb is 200 Watts.
- Dispose of old bulbs according to local regulations, especially for HID lamps which may contain mercury.
- Do not operate the bulb if the glass envelope is cracked or broken.
- This bulb is designed for specific HID fixtures. Do not use in standard incandescent or fluorescent fixtures.
3. セットアップとインストール
- 電源を切る: Locate the circuit breaker or fuse box controlling the fixture and turn off the power supply. Verify power is off using a voltageテスター。
- 冷却を許可します: If replacing an existing bulb, allow the old bulb and fixture to cool down completely. This may take several minutes.
- 古い電球を取り外す: Carefully remove the old bulb from the fixture. For double-ended HID bulbs, this typically involves releasing the spring-loaded contacts or unscrewing retaining clips.
- 検査器具: Check the fixture's socket and wiring for any signs of damage or wear. Address any issues before proceeding.
- 新しい電球を取り付ける: Holding the new Technical Precision bulb with a clean cloth or gloves, carefully insert it into the fixture's socket. Ensure it is seated firmly and correctly according to the fixture's design. Do not overtighten or force the bulb.
- 電力を回復する： 電球がしっかりと取り付けられたら、回路ブレーカーまたはヒューズ ボックスから器具への電力を復元します。
- テスト： Turn on the light switch to confirm the new bulb is functioning correctly.
4. 操作手順
This replacement bulb operates like a standard HID lamp. Once installed in a compatible fixture, its operation is controlled by the fixture's power switch.
- 最初のウォームアップ: HID bulbs require a short warm-up period to reach full brightness and color stability. This typically takes a few minutes after initial ignition.
- 再攻撃時間: If the bulb is turned off, it may require a cool-down period (restrike time) before it can be reignited. Attempting to immediately restart a hot HID bulb may prevent it from igniting or shorten its lifespan.
- コントロール： The bulb's on/off function is managed by the external power switch connected to the fixture.
5. メンテナンス
Proper maintenance can extend the life and performance of your bulb.
- クリーニング： Periodically, with power off and bulb cool, gently wipe the glass envelope with a clean, dry, lint-free cloth to remove dust or debris. Do not use liquid cleaners.
- 検査： Regularly inspect the bulb and fixture for any signs of damage, discoloration, or loose connections.
- 交換： Replace the bulb when it reaches the end of its rated life, shows signs of dimming, flickering, or fails to ignite consistently.
6。 トラブルシューティング
If the bulb is not functioning as expected, refer to the following common issues and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電球が点灯しません。 | No power to fixture, incorrect installation, faulty bulb, or faulty ballast/fixture. |
|
| 電球がちらついたり暗くなったりする。 | Loose connection, aging bulb, or ballast issue. |
|
| Bulb takes a long time to warm up or restrike. | Normal for HID bulbs, or bulb is nearing end of life. |
|
7. 仕様
| 属性 | 詳細 |
|---|---|
| ブランド | 技術的精度 |
| モデル番号 | 69316 |
| 互換性 | Direct replacement for OSRAM Sylvania 69316 |
| ワットtage | 200ワット |
| 材料 | 銅（内部部品） |
| ユニット数 | 1.0 カウント |
| 接続技術 | Normal bulb (requires compatible HID ballast) |
| メーカー | 技術的精度 |
8. 保証とサポート
This Technical Precision product is covered by the manufacturer's standard warranty. For specific warranty terms, duration, and claim procedures, please refer to the documentation provided with your purchase or visit the Technical Precision official webサイト。
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact Technical Precision customer service. Contact information can typically be found on the product packaging or the manufacturer's webサイト。
Note: Always ensure you have your product model number (69316) and purchase date available when contacting support.