Utilitech Wall Wash Trim Instruction Manual

1.製品オーバーview

The Utilitech Wall Wash Trim is designed to provide a focused light distribution, creating a "wall wash" effect for recessed lighting fixtures. This trim is specifically designed to fit 4-inch recessed lighting housings and features a white finish with magnetic attachment for ease of installation. It is made from copper material, ensuring durability and efficient light reflection.

Figure 1: Utilitech Wall Wash Trim, front view. This image shows the white finish and the curved design of the trim, which helps direct light.

2. 安全情報

Please read all instructions carefully before installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• Always disconnect power at the circuit breaker before installing or servicing the fixture.
• 設置手順が不明な場合は、資格のある電気技師にご相談ください。
• すべての電気接続が現地の規則や条例に準拠していることを確認してください。
• Do not install in wet locations unless the housing is rated for such use.
• Handle with care to avoid damage to the trim or housing.

3. パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• 1 x Utilitech Wall Wash Trim (White Finish)
• インストールガイド（このドキュメント）

Figure 2: Utilitech Wall Wash Trim as packaged. The packaging indicates it is a 4-inch trim with a white finish and wall wash reflective material.

4. セットアップとインストール

This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure the housing is properly installed and wired according to its own instructions and local electrical codes.

1. ハウジングを準備する: Ensure the recessed lighting housing is securely mounted in the ceiling and all electrical connections are complete and safe. The power to the circuit should be OFF at the breaker.
2. 既存のトリムを削除します（該当する場合）： If replacing an old trim, gently pull it down from the housing. Disconnect any springs or clips holding it in place.
3. Align the Trim: Position the Utilitech Wall Wash Trim so that the wall wash opening faces the wall you wish to illuminate. The trim is designed with magnetic attachment points that will align with the housing.
4. トリムを固定する: Gently push the trim upwards into the recessed housing. The magnetic points will secure the trim firmly in place. Ensure it sits flush with the ceiling surface.
5. 電力を回復する： Once the trim is securely installed, turn the power back ON at the circuit breaker. Test the light fixture to ensure proper operation.

Note: This trim is compatible with select recessed downlight housings. Refer to your housing's manual for compatibility details.

5. 操作

The Utilitech Wall Wash Trim itself does not have operational controls. Its function is passive, directing light from the installed bulb within the recessed housing. Once installed, the light will operate according to the switch connected to the recessed fixture.

• 光の方向: The unique design of the wall wash trim directs light towards a specific wall, creating an accent lighting effect.
• 電球の互換性： Ensure the bulb used in the recessed housing is compatible with the housing and provides the desired light output for the wall wash effect.

6. メンテナンス

The Utilitech Wall Wash Trim requires minimal maintenance to retain its appearance and functionality.

• クリーニング： To clean the trim, ensure the power to the fixture is OFF. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.
• 検査： Periodically inspect the trim for any signs of damage or loosening. If the trim appears loose, gently push it back into place until the magnets secure it.
• 電球の交換: When replacing the bulb in the recessed housing, gently pull down the trim to access the bulb. Reinstall the trim after bulb replacement.

7。 トラブルシューティング

If you encounter issues with your Utilitech Wall Wash Trim, consider the following common solutions:

8. 仕様

9. 保証とサポート

This Utilitech product comes with a 3-year warranty as indicated on the product packaging. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Utilitech customer support.

For technical assistance or further inquiries, please contact Utilitech customer service. Contact information can typically be found on the product packaging or the official Utilitech webサイト。

保証請求のために購入証明書を保管してください。