Amazon Basics 18EI-43

Amazon Basics Steel Security Safe and Lock Box (Model 18EI-43) Instruction Manual

導入

This manual provides instructions for the setup, operation, and maintenance of your Amazon Basics Steel Security Safe and Lock Box, Model 18EI-43. Please read these instructions carefully before use and retain for future reference. This safe is designed to secure valuables such as cash, jewelry, and documents using a digital keypad or emergency override keys.

安全情報

  • Do not store emergency keys inside the safe. Keep them in a secure, separate location away from the safe.
  • Ensure the safe is mounted securely to a wall, floor, or shelf to prevent unauthorized removal.
  • Keep the safe away from extreme temperatures and moisture.
  • 電池残量低下インジケーターが表示されたら、ロックアウトされないように、すぐに電池を交換してください。

含まれるもの

パッケージには次のコンポーネントが含まれています。

  • Amazon Basics Steel Security Safe
  • 緊急オーバーライドキー2個
  • 4 Expansion Bolts for mounting
Image showing the Amazon Basics Steel Security Safe, two emergency keys, and four expansion bolts.

This image displays the safe along with its included accessories: two emergency keys and four expansion bolts for secure installation.

設定

最初のオープニング

Your safe is shipped in a locked state. To open it for the first time:

  1. 電子キーパッド パネル上のキーホール カバーを見つけます。
  2. キーホールカバーを取り外します。
  3. 緊急オーバーライド キーの 1 つをキーホールに挿入します。
  4. Turn the key counter-clockwise and simultaneously turn the knob clockwise to open the safe door.
Diagram illustrating how to open the safe using the emergency key and the knob.

This diagram illustrates the two methods for opening the safe: using the emergency key or entering a passcode.

バッテリーの取り付け

The safe requires four AA batteries (not included) for the electronic keypad to function.

  1. 金庫のドアを開いた状態で、ドアの内側にある電池ボックスを見つけます。
  2. 電池ボックスのカバーを開きます。
  3. 正しい極性 (+/-) を確認して、新しい AA 電池 4 本を挿入します。
  4. 電池ボックスのカバーを閉じます。

金庫の取り付け

For enhanced security, the safe can be mounted to a wall, floor, or shelf using the provided expansion bolts.

  1. 取り付けには適切で目立たない場所を選択してください。
  2. Mark the drilling points through the pre-drilled holes located inside the safe.
  3. 印を付けた位置に下穴を開けます。
  4. 金庫をドリルで開けた穴に合​​わせて、拡張ボルトを使用して固定します。
Image of the safe placed inside a closet on a shelf.

The safe can be discreetly placed and mounted within a closet or on a shelf for secure storage.

操作手順

Setting Your User Code

The user code can be 3 to 8 digits long.

  1. With the safe door open, press the red reset button located on the inside of the door, near the battery compartment. The yellow light on the keypad will illuminate.
  2. Enter your desired 3 to 8 digit code.
  3. Press the "#" button to confirm. The yellow light will turn off, indicating the code is set.
  4. ドアを閉める前に、ドアを開いた状態で新しいコードをテストします。

Opening the Safe with the Digital Keypad

  1. 3~8桁のユーザーコードを入力してください。
  2. 「#」ボタンを押します。
  3. 5 秒以内にノブを時計回りに回して金庫のドアを開けます。
Diagram illustrating how to open the safe using the emergency key and the knob.

This diagram illustrates the two methods for opening the safe: using the emergency key or entering a passcode.

Opening the Safe with Emergency Keys

In case of a forgotten code or depleted batteries, the emergency keys provide access.

  1. Remove the keyhole cover on the electronic keypad panel.
  2. Insert an emergency override key into the keyhole.
  3. Turn the key counter-clockwise and simultaneously turn the knob clockwise to open the safe door.

メンテナンス

バッテリー交換

When the low battery indicator (usually a red light or specific display icon) appears, replace all four AA batteries promptly to ensure continued operation. Always use new, high-quality batteries.

クリーニング

金庫の外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。

キーストレージ

Always store the emergency override keys in a secure location away from the safe. Do not store them inside the safe.

トラブルシューティング

  • キーパッドが反応しない: Ensure batteries are correctly installed and not depleted. If the issue persists, check for any loose internal connections, such as a ribbon cable, by carefully inspecting the inside of the door (refer to the "Battery Installation" section for access).
  • Safe Will Not Open with Code: Verify that the correct code is being entered. Ensure the "#" button is pressed after the code, and the knob is turned within 5 seconds. If batteries are low, use the emergency key.
  • 緊急キーが機能しない: Ensure the key is fully inserted and turned counter-clockwise while simultaneously turning the knob clockwise.
  • Annoying Beeper Sound: The safe's electronic keypad emits beeps. There is no user-adjustable volume control. Please note that unauthorized modifications to the internal speaker are not officially supported and may void the product warranty.

仕様

特徴詳細
ブランドAmazonベーシック
モデル番号18EI-43
製品の寸法(WxDxH)16.93インチ x 14.57インチ x 7.09インチ (43cm x 37cm x 18cm)
Internal Chamber Depth11.93インチ
容量0.7 立方フィート (19.8 リットル)
ロックタイプElectronic with Digital Keypad, Emergency Key Override
材料合金鋼
取り付けタイプ壁掛け、床置き
アイテム重量19.8 ポンド (8.98 キログラム)
電池が必要4 AA(含まれていません)
含まれるコンポーネント2 Back-up keys, 4 expansion bolts
Diagram showing the dimensions of the Amazon Basics Steel Security Safe.

This image provides a visual representation of the safe's external dimensions.

保証とサポート

For warranty information or technical support regarding your Amazon Basics Steel Security Safe, please refer to the documentation included with your purchase. You may also visit the official Amazon Basics support webさらにサポートが必要な場合は、サイトをご覧ください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.