Proteus AMBIO PSHT07 Wi-Fi 温度湿度センサー ユーザーマニュアル

1. はじめに

The Proteus AMBIO PSHT07 is a cloud-connected Wi-Fi temperature and humidity sensor designed to monitor environmental conditions and provide alerts. This device connects directly to your home or office Wi-Fi network, eliminating the need for a separate hub or gateway. It sends alerts via email and text messages to multiple contacts when predefined temperature or humidity thresholds are exceeded. The unit also features a programmable smart buzzer for local audible alerts.

This manual provides detailed instructions for setting up, operating, and maintaining your Proteus AMBIO sensor to ensure optimal performance and reliable environmental monitoring.

2. 箱の中身

Upon unboxing your Proteus AMBIO PSHT07, please ensure all the following items are present:

• Proteus AMBIO Sensor Unit
• 電源アダプター
• External Sensor Cable (3 inches)
• クイックスタートガイド

3. セットアップ手順

Follow these steps to set up your Proteus AMBIO sensor:

3.1. Initial Power On and Connection

1. デバイスを接続します: Connect the external sensor cable to the Proteus AMBIO unit. Plug the power adapter into a standard wall outlet and then connect it to the sensor unit. The LED indicator on the sensor will flash green upon initial power-up.
2. Activate Setup Mode: Press and hold the button on the sensor unit until the LED indicator turns blue. This indicates the device is in setup mode and broadcasting its own Wi-Fi network (e.g., "ProteusSetup-XXXXX").
3. Connect to Setup Wi-Fi: On your smartphone, tablet, or computer, go to your Wi-Fi settings and connect to the "ProteusSetup-XXXXX" network.
4. Access Setup Portal: A setup portal should automatically open in your web browser. If it does not, open your web ブラウザを開いて http://192.168.3.3.
5. 画面上の指示に従ってください: The portal will guide you through selecting your home/office Wi-Fi network and entering its password. You will also configure alert settings for temperature and humidity thresholds.
6. セットアップを完了します: Once configured, the sensor will connect to your chosen Wi-Fi network, and the LED indicator will turn green. The setup is complete.

For a visual guide on the unboxing and setup process, please refer to the video below:

4. 操作手順

4.1. リモートモニタリング

Once your Proteus AMBIO sensor is set up, you can monitor temperature and humidity data remotely through the Proteus web portal. Access the portal from any web browser on your smartphone, tablet, or computer. The dashboard displays real-time readings and allows you to adjust settings as needed.

4.2. Alert Configuration

You can customize alert thresholds for both temperature and humidity. When readings fall outside your set range, the sensor will trigger alerts. Alerts can be sent to multiple email addresses and phone numbers via text message. The built-in buzzer will also sound locally.

• 温度アラート: Set minimum and maximum temperature values.
• Humidity Alerts: Set minimum and maximum relative humidity percentages。
• パワーオウtageアラート: The device will notify you if it loses power and when power is restored.
• ブザー制御: The smart buzzer can be programmed to turn off automatically after a set period to prevent prolonged noise.

4.3. Multi-Sensor Management

If you have multiple Proteus sensors, they can all be managed from a single dashboard, providing a centralized view of all monitored locations. You can also grant view-only access to trusted individuals for shared monitoring.

5. 仕様

6。 トラブルシューティング

If you encounter issues with your Proteus AMBIO sensor, consider the following troubleshooting steps:

• Wi-Fi接続なし: Ensure the sensor is within range of your Wi-Fi router. Check your Wi-Fi password and re-enter it during the setup process if necessary. Restart your Wi-Fi router and the sensor.
• 間違った読み方: Verify the external sensor cable is securely connected. Ensure the sensor is placed in an area that accurately reflects the conditions you wish to monitor, away from direct heat sources or drafts.
• アラートを受信できませんでした: Check your email spam folder. Verify that the email addresses and phone numbers configured for alerts are correct in the Proteus web portal. Ensure your device has an active internet connection.
• ブザーが鳴らない: Check if the smart buzzer is enabled and its programmable off-time is not set too short.
• デバイスがオフライン: If the device appears offline, check for power outages or Wi-Fi network issues. The device will send a power outage alert if configured.

7. メンテナンス

The Proteus AMBIO sensor requires minimal maintenance:

• クリーニング： Wipe the sensor unit and external probe with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• 配置: Ensure the sensor is placed in a location where it can accurately measure temperature and humidity without obstruction. The 3-inch external sensor cable allows for flexible placement.
• ファームウェアの更新： Periodically check the Proteus web portal or support webデバイスに最新の機能とセキュリティ強化が適用されていることを確認するために、利用可能なファームウェア アップデートをサイトで確認してください。

8. 保証とサポート

Specific warranty information was not provided in the product data. For detailed warranty terms, technical support, or to request a longer sensor cable, please contact Proteus customer support directly via their official website, ProteusSensor.com.