SHARP Plasmacluster Ion Generator IG-HC15-B Instruction Manual

1. はじめに

ご購入ありがとうございますasing the SHARP Plasmacluster Ion Generator IG-HC15-B. This device is designed to improve the air quality in your vehicle by generating high-density Plasmacluster 25000 ions. It effectively reduces odors, collects pollen, and fine dust particles, providing a more comfortable environment. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. 安全上の注意

To prevent injury to yourself and others, or damage to the product, always observe the following safety precautions:

• Do not disassemble, repair, or modify the unit. This may cause electric shock, fire, or malfunction.
• Do not allow water or any liquids to enter the unit. This may cause electric shock or fire.
• Use only the provided USB car adapter and USB cable. Using incompatible power sources may cause fire or damage.
• Ensure the unit is securely placed in a cup holder and does not obstruct the driver's view or interfere with driving operations.
• Keep the air inlet and outlet clear of obstructions. Blocked airflow can reduce performance or cause overheating.
• Do not use the unit in extremely hot or humid environments, or where flammable gases are present.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• SHARP Plasmacluster Ion Generator (Main Unit)
• USBカーアダプター
• USBケーブル（約1.5m）
• ユニットクリーニングブラシ

4.製品オーバーview

The SHARP Plasmacluster Ion Generator IG-HC15-B is designed to fit conveniently into your vehicle's cup holder. It features a sleek black design and intuitive controls.

画像1：正面 view of the SHARP Plasmacluster Ion Generator IG-HC15-B, showing the main unit with its cup holder design and USB cable connection.

主要コンポーネント:

• 空気吹き出し口： Where purified air and Plasmacluster ions are released.
• コントロールパネル： Features large buttons for easy operation (Power, Mode selection).
• 空気吸入口： Located at the bottom, draws in ambient air.
• USBポート: 電源接続用。

5. セットアップ

Follow these steps to set up your Plasmacluster Ion Generator:

1. ユニットを配置します。 Insert the main unit firmly into a vehicle cup holder. Ensure it is stable and does not wobble during driving.
2. USBケーブルを接続します: Connect one end of the provided USB cable to the USB port on the bottom of the ion generator.
3. 電源に接続: Plug the other end of the USB cable into the provided USB car adapter. Then, insert the USB car adapter into your vehicle's 12V accessory power outlet (cigarette lighter socket).

Image 2: The included USB car adapter, used to power the unit from your vehicle's accessory outlet.

6. 操作手順

The unit is designed for simple operation with large, easy-to-press buttons.

電源オン/オフ:

• ユニットの電源を入れるには、 力 button. The unit will start in the default operating mode.
• ユニットの電源を切るには、 力 もう一度ボタンを押します。

動作モード:

を押す モード 利用可能な動作モードを切り替えるボタン:

• 標準モード: Provides balanced air purification and ion generation for everyday use.
• ターボモード： Activates high-speed operation for approximately double the deodorization speed. Ideal for quickly removing strong odors.
• サイレントモード： Operates at a reduced fan speed for quieter performance, suitable for use in a quiet vehicle environment. The operating noise level is approximately 36dB in this mode.

Airflow Angle Adjustment:

このユニットには2つのtage switching mechanism for adjusting the blowing angle of the airflow. Manually adjust the top part of the unit to direct the airflow as desired.

7. メンテナンス

Regular cleaning ensures optimal performance and extends the lifespan of your ion generator.

本体の掃除：

• Before cleaning, ensure the unit is powered off and disconnected from the power source.
• 本体の外側は、柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
• Use the provided unit cleaning brush to gently remove dust and debris from the air inlet and outlet grilles.

Cleaning the Ion Generating Unit:

The ion generating unit requires periodic cleaning to maintain ion generation efficiency. Refer to the detailed instructions in the full product manual for specific steps on how to access and clean this component using the cleaning brush.

8。 トラブルシューティング

If you encounter any issues with your ion generator, please refer to the following common problems and solutions:

9. 仕様

Technical specifications for the SHARP Plasmacluster Ion Generator IG-HC15-B:

Image 3: Diagram showing the dimensions of the SHARP Plasmacluster Ion Generator, approximately 17 cm (6.7 inches) in height.

10. 保証とサポート

For warranty information, technical support, or service inquiries, please contact SHARP customer service or visit the official SHARP webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

Official SHARP Webサイト： https://global.sharp/