AmScope SM-4T-30WS Stereo Trinocular Microscope User Manual

1. はじめに

This manual provides essential information for the safe and effective use of your AmScope SM-4T-30WS Stereo Trinocular Microscope. This system is designed for industrial inspection, biological applications, research labs, gemology, and use in semiconductor and electronic industries. It features a 7X-45X zoom magnification, a trinocular head for camera integration, a dual-arm boom stand for flexible positioning, and a 30 Watt LED fiber-optic illuminator for bright, cool lighting.

2. 安全情報

• 光学部品や機械部品の損傷を防ぐため、顕微鏡は常に注意して取り扱ってください。
• 顕微鏡が安定した水平な面に置かれていることを確認してください。
• 清掃やメンテナンスを行う前に、電源コードを抜いてください。
• 顕微鏡を直射日光、高温、高湿度にさらさないでください。
• 付属の電源アダプターと付属品のみを使用してください。
• Avoid touching optical surfaces with bare hands. Use specialized lens cleaning materials.

3. パッケージ内容

組み立て前にすべてのコンポーネントが揃っていることを確認してください。

• AmScope SM-4T-30WS Trinocular Microscope Head
• Dual-Arm Boom Stand
• 30 Watt LED Fiber-Optic Illuminator
• 22-inch Metal-Sheathed Fiber-Optic Cable
• Pair of Eyepieces (e.g., WF10X)
• 電源アダプター
• ダストカバー

4. セットアップ手順

4.1. Assembling the Boom Stand

1. Place the heavy base of the boom stand on a stable workbench.
2. Insert the vertical pillar into the base and secure it with the locking screw.
3. Attach the dual-arm assembly to the vertical pillar, ensuring all joints are secure but allow for movement.

4.2. 顕微鏡ヘッドの取り付け

1. Carefully remove the trinocular microscope head from its packaging.
2. Loosen the set screw on the microscope head holder of the boom stand.
3. Insert the microscope head into the holder and tighten the set screw to secure it. Ensure the head is level.
4. Insert the eyepieces into the two ocular tubes.

4.3. Connecting the LED Fiber-Optic Illuminator

1. Place the 30 Watt LED fiber-optic illuminator near the microscope.
2. Insert one end of the 22-inch metal-sheathed fiber-optic cable into the illuminator's output port.
3. Position the other end of the fiber-optic cable to direct light onto your specimen. The cable is flexible and can be bent as needed.

4.4. 電源接続

1. Connect the power adapter to the LED fiber-optic illuminator.
2. 電源アダプターを適切なコンセントに差し込みます。

Figure 1: The complete AmScope SM-4T-30WS microscope system, including the trinocular head, dual-arm boom stand, and the LED fiber optic illuminator with its flexible cable.

5. 操作手順

5.1. 電源の投入と照明の調整

1. Turn on the LED fiber-optic illuminator using its power switch.
2. Adjust the intensity of the light using the dimmer control on the illuminator.
3. Position the fiber-optic cable to provide optimal illumination for your specimen, minimizing shadows and glare.

5.2. Placing the Specimen

Place your specimen directly under the objective lens of the microscope head.

5.3. 倍率の調整

The microscope offers a 7X-45X continuous zoom magnification. Rotate the zoom knob located on the microscope head to change the magnification. Observe through the eyepieces as you adjust.

5.4. 集中する

1. While looking through the eyepieces, slowly rotate the coarse focus knob until the specimen comes into approximate focus.
2. Use the fine focus knob for precise focusing to achieve a sharp, clear image.
3. Adjust the interpupillary distance (distance between eyepieces) and diopter settings on the eyepieces for comfortable viewing and to compensate for differences in vision between your eyes.

5.5. Utilizing the Dual-Arm Boom Stand

The dual-arm boom stand allows for versatile positioning of the microscope head. You can move the head along three axes (X, Y, and Z) to view different areas of a large specimen or to position the microscope at various angles. Loosen the locking knobs on the stand, adjust the position, and then re-tighten them to secure the microscope.

5.6. Using the Trinocular Port (for Camera Integration)

The trinocular port allows for the attachment of a camera (sold separately) to capture images or video. To use this feature:

1. Remove the dust cap from the trinocular port.
2. Attach your compatible microscope camera to the port.
3. Refer to your camera's instruction manual for software installation and operation.
4. Adjust the light path selector (if present) to direct light to the trinocular port for imaging.

図2: 詳細な view of the trinocular microscope head, highlighting the eyepieces and the camera port, which allows for digital imaging and video capture.

6. メンテナンス

6.1. 光学系のクリーニング

• Use a soft brush or air blower to remove dust from lens surfaces.
• For smudges or fingerprints, use a lens cleaning solution and specialized lens paper or microfiber cloth. Apply solution to the cloth, not directly to the lens.
• Clean eyepieces and objective lenses gently in a circular motion from the center outwards.

6.2.一般的なクリーニング

• 顕微鏡本体とスタンドを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• Ensure all moving parts of the boom stand are free of dust and debris.

6.3. ストレージ

• When not in use, cover the microscope with the provided dust cover to protect it from dust and environmental contaminants.
• Store the microscope in a cool, dry place, away from direct sunlight and vibrations.

7。 トラブルシューティング

8. 仕様

9. 保証とサポート

This AmScope product is manufactured by United Scope, LLC. For warranty information, please refer to the documentation included with your purchase or contact AmScope customer support directly. For technical assistance, troubleshooting beyond this manual, or spare parts, please reach out to the manufacturer's support channels.

メーカー: United Scope, LLC