BN-LINK Digital Countdown Wall Timer Switch (Model BND-60/U110b-1) Instruction Manual

導入

Thank you for choosing the BN-LINK Digital Countdown Wall Timer Switch. This device is designed to provide convenient and energy-efficient control over your lights and exhaust fans. With its simple push-button operation and preset countdown options, you can easily automate shut-off times, helping to conserve energy and enhance your daily routine. This manual provides detailed instructions for installation, operation, and safety to ensure optimal performance and longevity of your timer switch.

箱の中身

• BN-LINK Digital Countdown Wall Timer Switch
• ウォールプレート
• ワイヤーナット
• 取り付けネジ
• 取扱説明書

Image: Package contents showing the timer switch, wire nuts, and wall plate.

仕様

Image: Size details of the timer switch, including its dimensions and included accessories like wire nuts and face plate.

重要な安全情報

• 警告： 火災、感電、または死亡事故を避けるため、配線を行う前に回路ブレーカーまたはヒューズ ボックスで電源をオフにし、電源がオフになっていることを確認してください。
• このデバイスには 中性線 for proper operation. Ensure your electrical box has a neutral wire available.
• For single-pole installations only. Do not use in 3-way or multi-way switch applications.
• 設置手順のいずれかの部分について不明な点がある場合は、資格のある電気技師に相談してください。
• Rated 125V, 60 Hz, 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5. Do not exceed these ratings.

インストール手順

1. 電源を切ります: Before beginning any electrical work, ensure the power to the switch location is turned off at the circuit breaker or fuse box. Verify power is off using a voltageテスター。
2. 既存のスイッチを削除します。 Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. ワイヤーを識別する: 電気ボックス内の次の配線を特定します。
   • ホットワイヤー（ライン）： 通常は黒で、回路ブレーカーから電力を供給します。
   • 負荷ワイヤー: Typically black, connects to the fan or light fixture.
   • 中性線: Typically white, required for this timer switch.
   • アース線： Typically green or bare copper.
4. タイマースイッチを配線する: Connect the wires from your electrical box to the corresponding wires on the BN-LINK timer switch using the provided wire nuts.
   • 接続する ホットワイヤー from the wall to the 黒線 タイマーの。
   • 接続する ロードワイヤー 器具から 赤いワイヤー タイマーの。
   • 接続する 中性線 from the wall to the 白いワイヤー タイマーの。
   • 接続する アース線 from the wall to the 緑のワイヤー タイマーの。
5. スイッチを取り付けます。 Carefully push the wired timer switch into the electrical box. Secure it with the provided mounting screws.
6. ウォールプレートの取り付け: Attach the included wall plate over the timer switch.
7. 電力を回復する： 回路ブレーカーで電源を再度オンにします。

Image: Detailed wiring diagram for the timer switch, emphasizing the neutral wire requirement.

操作手順

The BN-LINK Digital Countdown Wall Timer Switch features intuitive push-button controls for easy operation. Each button has a small LED indicator that illuminates when active.

1. Preset Countdown Functions

The timer offers six preset countdown durations: 5 minutes, 15 minutes, 30 minutes, 60 minutes (1 hour), 2 hours, and 4 hours. To activate a countdown:

• Press the button corresponding to your desired countdown time (e.g., "5 Min", "15 Min", "1 Hour").
• The LED indicator next to the selected button will illuminate, and the connected device (fan/light) will turn on.
• The device will automatically turn off once the countdown period expires.

2. Manual ON/OFF

The "ON/OFF" button allows for continuous operation or immediate shut-off, overriding any active countdown or repeat function.

• Press "ON/OFF" once to turn the connected device on indefinitely. The "ON/OFF" LED will illuminate.
• Press "ON/OFF" again to turn the connected device off immediately. The "ON/OFF" LED will turn off.

3.リピート機能

The "REPEAT" button activates a daily repeat for the currently selected countdown program.

• While a countdown program is active, press the "REPEAT" button. The "REPEAT" LED will illuminate.
• The selected countdown will automatically run at the same time every day.
• To deactivate the repeat function, press the "REPEAT" button again. The LED will turn off.
• Alternatively, pressing the "ON/OFF" button will also cancel the repeat function.

画像: 上view of timer switch features, including LED indicators, one-button programming, repeat function, and manual ON/OFF.

Image: The repeat button on the timer switch, which allows for daily automatic countdowns.

多用途アプリケーション

This timer switch is suitable for a wide range of indoor applications, enhancing convenience and energy savings in various areas of your home. It is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters.

• バスルーム: Automatically turn off exhaust fans after a set period to manage humidity.
• Closets & Pantries: Ensure lights turn off after you leave.
• Garages & Basements: Prevent lights from being left on accidentally.
• ランドリールーム: Control lighting or fan operation.
• Sauna Rooms: Set specific durations for sauna use.

画像: Examples of various rooms and settings where the timer switch can be effectively utilized.

トラブルシューティング

If you encounter any issues with your BN-LINK Digital Countdown Wall Timer Switch, please review the installation steps and operating instructions carefully. Ensure all wire connections are secure and that the power supply is active. If problems persist, please contact customer support for assistance.

保証とカスタマーサポート

The BN-LINK Digital Countdown Wall Timer Switch is ETL listed, conforming to UL Std. 60730-1 and 60730-2-7, ensuring safety and reliability. For any questions regarding installation, operation, or product support, please do not hesitate to contact BN-LINK customer service. We are committed to providing quality products and support to our customers.

Contact information can typically be found on the product packaging or the official BN-LINK webサイト。