Gingko Gravity Cube Click Clock GK18TL ユーザーマニュアル

導入

The Gingko Gravity Cube Click Clock is an innovative alarm clock designed for ease of use and modern aesthetics. This device features a sound-activated LED display, a gravity-controlled alarm function, and a touch-sensitive snooze. This manual provides detailed instructions for setting up, operating, and maintaining your Gravity Cube Click Clock.

図1: 前面 view of the Gingko Gravity Cube Click Clock.

設定

Before using your Gravity Cube Click Clock, please follow these steps for initial setup.

1. デバイスの電源供給

The clock can be powered via USB or batteries.

• USB電源： Connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a USB power adapter (not always included) or a powered USB port.
• バッテリー電源: Open the battery compartment on the back of the clock. Insert 1 Lithium Polymer battery (required, not always included) according to the polarity markings. Ensure the battery is securely placed.

Figure 2: Back panel with controls and power input.

2. Initial Settings (Time, Date, Temperature)

Upon first power-on, the display will activate. You will need to set the current time and date.

1. を押す セット button on the back of the clock to enter setting mode.
2. 使用 + そして - 値を調整するためのボタン (例: 時間、分、年、月、日)。
3. プレス セット again to confirm each setting and move to the next parameter.
4. Continue until all settings (time, date, temperature unit if applicable) are configured.

操作手順

1. Display Activation

The LED display is sound-activated. It will automatically switch off when the room is quiet to conserve power. To activate the display:

• Make a sound (e.g., clap your hands).
• Gently tap the bedside table or surface the clock is resting on.

The display will show time, date, and temperature alternately.

Figure 3: Clock displaying time.

2.アラームの設定

The Gravity Cube features a gravity-controlled alarm.

1. を押す アラームアイコン button on the back of the clock to enter alarm setting mode.
2. 使用 + そして - ボタンを押して希望のアラーム時間を設定します。
3. を押す アラームアイコン もう一度ボタンを押して確認します。
4. To activate the alarm, ensure the side of the clock with the alarm icon is facing upwards. The display will show an alarm indicator.
5. To deactivate the alarm, turn the clock over so a different side is facing upwards. The alarm indicator will disappear.

3. スヌーズ機能

アラームが鳴ったら、スヌーズ機能を有効にすることができます。

• Gently touch the top surface of the clock (where "SNOOZE" is indicated). The alarm will pause for a short period (typically 5-9 minutes) and then sound again.

4. Voice/Sound Control Sensitivity (V/S)

の V / S button on the back panel may allow adjustment of the sound activation sensitivity for the display. Refer to the specific product packaging or a more detailed manual for precise control over this feature.

メンテナンス

To ensure the longevity and proper functioning of your Gingko Gravity Cube Click Clock, follow these maintenance guidelines:

• クリーニング： Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the rubberized finish.
• バッテリー交換: If using battery power, replace the Lithium Polymer battery when the display dims or functions become erratic. Ensure correct polarity when inserting new batteries.
• ストレージ： 時計を長期間保管する場合は、液漏れを防ぐために電池を取り外してください。

トラブルシューティング

If you encounter issues with your Gravity Cube Click Clock, refer to the following common problems and solutions:

• Display Not Activating:
  • Check power source: Ensure USB cable is securely connected or batteries are correctly inserted and not depleted.
  • Make a louder sound or tap the surface more firmly to activate the display.
• アラームが鳴らない:
  • Verify the alarm is set correctly (refer to "Setting the Alarm" section).
  • Ensure the side with the alarm icon is facing upwards to activate the alarm.
  • Check battery level if operating on batteries.
• Alarm Cannot Be Turned Off:
  • Turn the clock over to a different side to deactivate the alarm.
  • If the issue persists, temporarily remove batteries or disconnect USB power to reset the device.
• 時刻/日付が正しくありません:
  • Re-enter the setting mode using the セット button and adjust the time and date.
  • Ensure batteries are not low, as this can sometimes affect timekeeping.

仕様

保証とサポート

Specific warranty information for the Gingko Gravity Cube Click Clock GK18TL is typically provided with the product packaging or available on the manufacturer's official website. Please refer to these sources for details regarding warranty coverage and terms.

For technical support or further assistance, please contact Gingko customer service through their official webサイトまたは購入時に提供された連絡先情報を参照してください。