ThermoPro TP51​​1 デジタル調理用温度計 ユーザーマニュアル

導入

The ThermoPro TP16 digital cooking thermometer is an essential tool for achieving perfectly cooked meats every time. Designed for use in ovens, smokers, grills, and on stovetops, it provides accurate temperature readings and features a convenient timer function. This manual will guide you through the setup, operation, and maintenance of your new thermometer.

安全情報

• Always handle the stainless steel probe with care as the tip is sharp.
• The probe and wire are heat-resistant up to 716°F (380°C). Do not expose the main unit to temperatures exceeding 122°F (50°C).
• Do not immerse the main unit in water or place it in a dishwasher. Wipe clean with a damp 布。
• お子様の手の届かない場所に保管してください。

パッケージ内容

• 1 x ThermoPro TP16 Digital Cooking Thermometer Unit
• 1 x Stainless Steel Temperature Probe with 40-inch mesh cable
• 単1電池XNUMX本（付属）

設定

1. バッテリーの取り付け: Open the battery compartment on the back of the unit and insert the included 1 AAA battery, ensuring correct polarity.
2. プローブ接続： Insert the stainless steel probe's plug into the jack on the side of the main unit.
3. 配置: The TP16 offers multiple placement options:
   • 磁気バック: ユニットを冷蔵庫やオーブンのドアなどの金属表面に取り付けます。
   • 折りたたみ式スタンド: Use the integrated stand on the back to place the unit on a countertop.
   • 吊り下げ穴: 吊り下げ穴を利用してフックにユニットを吊り下げます。
   

   The thermometer offers multiple mounting options, including a magnetic back for attaching to metal surfaces, a fold-out stand for tabletop use, and a hanging hole for hooks.

操作手順

1. 電源オン/オフ: Slide the switch on the back of the unit to the 'ON' position to power on. Slide to 'OFF' to power off.
2. 温度単位の選択: On the back of the unit, slide the °C/°F switch to select your desired temperature unit (Celsius or Fahrenheit).
3. Meat Type Selection (Cook Mode):
   • Slide the switch on the back to 'TEMP'.
   • Press the 'MEAT/ST/SP' button repeatedly to cycle through USDA preset meat types (e.g., Poultry, Beef, Ham, Pork).
   • The display will show the selected meat type and its recommended internal temperature.
   

   The device comes pre-programmed with USDA-recommended temperatures for different types of meat, including poultry, beef, ham, and pork, which can be adjusted to personal preference.

4. カスタム温度設定:
   • While in 'TEMP' mode, press the '▲ HR' or '▼ MIN' buttons to manually adjust the target temperature.
   • The set temperature will flash, indicating it is being adjusted. Press 'MEAT/ST/SP' to confirm or wait for it to stop flashing.
   

   Users can easily set custom target temperatures for their desired doneness, with an audible alert when the temperature is achieved.

5. タイマーモード:
   • Slide the switch on the back to 'TIMER'.
   • Press '▲ HR' and '▼ MIN' to set the desired countdown time (up to 99 hours, 59 minutes).
   • Press 'MEM/S/S' to start or pause the timer.
   • To reset the timer, press and hold '▲ HR' and '▼ MIN' simultaneously.
   • The timer can also function as a count-up timer by pressing 'MEM/S/S' without setting a time.
   

   The thermometer includes both countdown and count-up timer modes, allowing for precise cooking times up to 99 hours and 59 minutes. An alarm sounds when the set temperature or time is reached.
6. アラーム機能: When the target temperature is reached in 'TEMP' mode, or the timer counts down to zero in 'TIMER' mode, the unit will beep and flash. Press any button to stop the alarm.

メンテナンスとケア

• クリーニング： Wipe the thermometer unit and probe with a damp cloth after each use. Do not immerse the unit in water. The probe can be cleaned with warm soapy water.
• ストレージ： Store the thermometer in a dry place. The probe tip is sharp; use the protective probe cover when storing to prevent injury.
• バッテリー交換: Replace the AAA battery when the display dims or the unit does not power on.

トラブルシューティング

• ディスプレイなし/暗いディスプレイ: Check battery polarity or replace the AAA battery.
• 不正確な温度測定: Ensure the probe is fully inserted into the thickest part of the meat, avoiding bone or gristle. Verify the probe cable is securely connected to the main unit.
• Probe Error (---): If the display shows '---', the probe may be damaged or not properly connected. Try reconnecting the probe. If the issue persists, the probe may need replacement.

仕様

保証情報

Specific warranty details for the ThermoPro TP16 are typically provided with the product packaging or on the official ThermoPro web保証範囲に関する包括的な情報については、これらのリソースを参照してください。

サポート

For further assistance, troubleshooting, or product inquiries, please visit the official ThermoPro website or contact their customer support. You can find contact information and FAQs on their dedicated support pages.