1. はじめに
Thank you for choosing the Vivanco PAH 30 Universal Adjustable Power Supply. This manual provides essential information for the safe and efficient use of your device. Please read these instructions carefully before use and retain them for future reference.
The Vivanco PAH 30 is designed to provide a stable power source for various electronic devices requiring DC voltage between 3V and 12V, with a maximum current of 2250mA. It features multiple interchangeable output connectors to ensure compatibility with a wide range of equipment.
2.製品オーバーview
The Vivanco PAH 30 Universal Adjustable Power Supply is a versatile adapter suitable for powering numerous small electronic devices. Its compact and lightweight design makes it ideal for both home and travel use.
Image: Vivanco PAH 30 Universal Adjustable Power Supply with its included interchangeable output connectors.
パッケージ内容:
- 1 x Vivanco PAH 30 Universal Adjustable Power Supply
- 8 x Interchangeable Output Connectors
3. 安全に関する注意事項
怪我やデバイスの損傷を防ぐために、次の安全上の注意事項を守ってください。
- This power supply is intended for indoor use only. Do not expose it to rain or moisture.
- Ensure the selected output voltage and polarity match the requirements of your electronic device. Incorrect settings can cause severe damage.
- Do not disassemble or modify the power supply. Refer all servicing to qualified personnel.
- Keep the power supply away from heat sources, direct sunlight, and flammable materials.
- Do not operate the power supply with a damaged cord or plug.
- 長期間使用しない場合は、電源プラグを壁のコンセントから抜いてください。
- お子様の手の届かない場所に保管してください。
4. セットアップ
Follow these steps to set up your Vivanco PAH 30 power supply:
- デバイス要件を決定する: Before connecting, check your electronic device's specifications for its required input voltage (V), current (mA), and polarity (usually indicated by a diagram like --C--+ or --O--+).
- 出力ボリュームを選択tage: The PAH 30 offers 7 adjustable voltage levels. Use the voltage selector switch on the power supply to choose the correct voltage (3V, 4.5V, 5V, 6V, 7.5V, 9V, or 12V) that matches your device's requirements.
- Select Output Connector: Choose one of the 8 interchangeable connectors that fits your device's power input port. Ensure a snug fit.
- 極性を設定: Most devices use center-positive polarity. The connectors are typically reversible to change polarity. Consult your device's manual or the connector itself to ensure the correct polarity is set. Incorrect polarity can damage your device.
- デバイスに接続します: Insert the selected connector into your electronic device's power input port.
- 電源コンセントに接続します。 Plug the power supply into a standard 240V AC wall outlet (Type C/EF Europlug).
5. 操作手順
Once properly set up, the Vivanco PAH 30 operates automatically:
- After plugging into the wall outlet, the power supply will deliver the selected DC voltage to your connected device.
- Monitor your device to ensure it is functioning correctly. If you notice any unusual behavior (e.g., overheating, flickering), immediately disconnect the power supply and re-check your voltageと極性の設定。
- To turn off the power supply, simply unplug it from the wall outlet.
6. メンテナンス
Proper maintenance ensures the longevity and safe operation of your power supply:
- クリーニング： 清掃する前に、電源プラグをコンセントから抜き、デバイスを取り外してください。表面は柔らかく乾いた布で拭いてください。液体クリーナーや研磨剤は使用しないでください。
- ストレージ： 使用していないときは、電源装置を直射日光や極端な温度を避けて、涼しく乾燥した場所に保管してください。
- ケーブルのお手入れ: 電源コードを過度に曲げたり、ねじったりしないでください。コードの上に重い物を置かないでください。
7。 トラブルシューティング
If you encounter issues with your Vivanco PAH 30, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスに電力が供給されていません | Power supply not plugged in; incorrect voltage/polarity; faulty outlet; damaged cable. | Ensure power supply is securely plugged into a working outlet. Verify voltage and polarity settings. Check cable for damage. |
| Device not charging/working correctly | 間違ったボリュームtage/polarity; insufficient current (mA); incompatible connector. | 巻を再確認tage and polarity settings against device requirements. Ensure the device's current requirement does not exceed 2250mA. Confirm the connector fits securely. |
| Power supply or device overheating | 過負荷、換気不良、内部故障。 | Disconnect immediately. Ensure the device's current requirement is within the power supply's limit. Provide adequate ventilation. If overheating persists, discontinue use and contact support. |
If the problem persists after trying these solutions, please contact Vivanco customer support.
8. 仕様
| モデル番号 | PAH30 |
| 入力ボリュームtage | 240ボルトAC |
| 周波数範囲 | 50～60Hz |
| 出力巻tage | 3V, 4.5V, 5V, 6V, 7.5V, 9V, 12V DC (7 selectable levels) |
| 出力電流 | 2.25 Amperes (2250mA) max |
| 出力電力 | 最大27ワット |
| 主電源コネクタのタイプ | 2-pin (Europlug Type C/EF) |
| Number of Output Connectors | 8 interchangeable tips |
| 色 | 黒 |
| 寸法 | 24 x 16 x 4.3 cm |
| 重さ | 100グラム |
| 特集 | Lightweight design, Portable |
9. 保証とサポート
Vivanco products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Vivanco webサイト。
If you require technical assistance or have questions about your Vivanco PAH 30 Universal Adjustable Power Supply, please contact Vivanco customer support through their official channels.