ROLAND D-110

ROLAND D-110 Digital Sound Module Instruction Manual

モデル: D-110

1. はじめに

ご購入ありがとうございますasing the ROLAND D-110 Digital Sound Module. The D-110 is a versatile rack-mount digital sound module featuring ROLAND's acclaimed LA (Linear Arithmetic) synthesis technology. It offers 32 voices of polyphony and 8-part multi-timbral capabilities, making it an ideal addition to any MIDI-based music production setup. This unit is designed for direct power connection.

This manual provides essential information for the proper setup, operation, and maintenance of your D-110. Please read it thoroughly before using the unit to ensure optimal performance and longevity.

ROLAND D-110 Digital Sound Module front view

図1: 前面 view of the ROLAND D-110 Digital Sound Module, showing controls and display.

2. 安全情報

安全な操作を確保し、損傷を防ぐために、次の注意事項を守ってください。

  • 電源： 指定された電源のみを使用してくださいtage. Ensure the power cable is securely connected and not damaged.
  • 位置： Place the unit on a stable, level surface. Avoid locations exposed to direct sunlight, extreme temperatures, high humidity, or excessive dust.
  • 換気： 通気口を塞がないでください。過熱を防ぐため、ユニット周囲に十分な空気の流れを確保してください。
  • 異物: Do not allow liquids or foreign objects to enter the unit. If this occurs, disconnect the power immediately and contact qualified service personnel.
  • サービス: Do not attempt to service the unit yourself. Refer all servicing to qualified ROLAND service personnel.

3. パッケージ内容

パッケージに以下のすべてのアイテムが含まれていることを確認してください。

  • ROLAND D-110 Digital Sound Module Unit
  • AC電源ケーブル
  • 取扱説明書（本書）

不足品や破損品がある場合は、すぐに販売店にご連絡ください。

4. セットアップ

4.1 電源の接続

  1. Ensure the D-110's power switch is in the OFF position.
  2. Connect the supplied AC power cable to the AC IN jack on the rear panel of the D-110.
  3. Plug the other end of the power cable into a standard AC outlet.

4.2オーディオ接続

Connect the D-110's audio outputs to your mixer, amplifier, or audio interface using appropriate audio cables (not included).

  • メイン出力（L/R）： For stereo output.
  • 個別出力: The D-110 may feature individual outputs for routing specific parts to separate mixer channels. Refer to the rear panel for available jacks.

4.3 MIDI接続

To control the D-110 from a MIDI keyboard, sequencer, or computer, connect MIDI cables (not included) as follows:

  • Connect the MIDI OUT of your controller/sequencer to the MIDI IN of the D-110.
  • If you wish to send MIDI data from the D-110 (e.g., system exclusive data), connect the MIDI OUT of the D-110 to the MIDI IN of your receiving device.

5. 操作手順

5.1 電源のオン/オフ

  • 電源を入れるには: Ensure all connections are made, then press the POWER switch on the front panel. The display will illuminate.
  • 電源を切るには: もう一度POWERスイッチを押してください。

5.2 Basic Sound Selection

The D-110 contains a variety of preset sounds (Tones). Use the front panel buttons and data entry controls to browse and select sounds.

  1. 使用 銀行 buttons to select a sound bank (e.g., A, B, C, D).
  2. 使用 番号 ボタンまたは 価値 dial to select a specific Tone within the bank.
  3. The display will show the name of the selected Tone.

5.3 Multi-Timbral Mode (Performance Mode)

The D-110 can play up to 8 different sounds simultaneously, each assigned to a separate MIDI channel. This is known as Performance Mode.

  1. を押す パフォーマンス button to enter Performance Mode.
  2. 使用 一部 buttons to select the MIDI part you wish to edit.
  3. Assign a Tone to each part and set its MIDI channel, volume, pan, and other parameters using the display and controls.
  4. Save your custom performance settings to a user memory location.

5.4 Editing Tones and Performances

The D-110 offers extensive editing capabilities for Tones and Performances. Refer to the detailed sections in the full owner's manual for in-depth instructions on parameter editing, effects, and saving your custom sounds.

6. メンテナンス

6.1 クリーニング

  • 本体の外側は、乾いた柔らかい布で拭いてください。
  • 頑固な汚れには、軽くこすったamp 布で拭いてから乾かしてください。
  • 研磨剤入りの洗剤、ワックス、溶剤は仕上げを傷める可能性があるため、使用しないでください。

6.2 ストレージ

When storing the D-110 for extended periods, ensure it is powered off and disconnected from the AC outlet. Store it in a cool, dry place away from direct sunlight and extreme temperatures.

7。 トラブルシューティング

問題 考えられる原因 解決
電源なし 電源ケーブルが接続されていない、電源コンセントに障害がある、ユニットのヒューズが切れている。 電源ケーブルの接続を確認し、別のコンセントを試してください。ヒューズの交換についてはサービスにお問い合わせください。
音声出力なし Audio cables not connected; Volume too low; MIDI input not received; Incorrect MIDI channel. Check audio cable connections; Increase D-110 and mixer/amp volume; Verify MIDI connections and channel settings.
MIDIが応答しない MIDI cables incorrect; MIDI channel mismatch; MIDI settings on D-110 or controller incorrect. Ensure MIDI OUT to MIDI IN connection; Check MIDI channels on both devices; Review MIDI settings in the D-110 manual.

If the problem persists after trying these solutions, please contact ROLAND customer support or a qualified service center.

8. 仕様

  • モデル： ROLAND D-110
  • Sound Generation: LA (Linear Arithmetic) Synthesis
  • ポリフォニー： 32 声
  • Multi-timbral Parts: 8
  • メモリ： Internal Tones, Performances, and User Memory (expandable with memory card, e.g., KV-211 if included)
  • コネクタ: MIDI IN/OUT/THRU, Audio Outputs (L/R, possibly individual), AC IN
  • 電源： Direct AC connection
  • 寸法: Standard 1U rack-mount size (specific dimensions may vary slightly)
  • 重さ： (Information not provided, refer to product packaging)

仕様は予告なく変更されることがあります。

9. 保証とサポート

ROLAND products are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official ROLAND webお住まいの地域に固有の詳細な保証条件については、こちらのサイトをご覧ください。

For technical support, service, or inquiries, please contact your local ROLAND distributor or authorized service center. Contact information can typically be found on the ROLAND official webサイト： www.roland.com/global/support/

© [Current Year] ROLAND Corporation. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.