1. はじめに
ログTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.
2. 安全情報
- Do not expose the device to extreme physical shock or vibration.
- Avoid immersing the device in liquids.
- デバイスを開けたり改造したりしないでください。保証が無効になり、損傷が発生する可能性があります。
- 地域の規制に従ってバッテリーを廃棄してください。
- Ensure the USB connector is clean and dry before connecting to a computer.
3. パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- ログTag UTRIX-16 PDF Temperature Data Logger
- ユーザーマニュアル（このドキュメント）
4.デバイスオーバーview
The UTRIX-16 features a compact design with clear indicators and control buttons.
図1: フロント view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.
- ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
- OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
- 停止ボタン： Press to stop the current logging session.
- START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
- Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.
図2: ログTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.
5. セットアップ
5.1初期構成
The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webサイト。
- Download and install the LogTag アナライザーソフトウェア ログTag Recorders Software.
- Connect the UTRIX-16 to a USB port on your computer.
- ログTag Analyzer software should automatically detect the connected device.
- Follow the on-screen prompts within the software to configure logging parameters as needed.
図3: ログTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.
5.2 バッテリー情報
The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.
6. 操作
6.1 Starting a Logging Session
To start a new logging session:
- Ensure the device is not currently logging (check the OK/ALERT indicators).
- を押し続けます スタート/マーク button for approximately 5 seconds until the OK indicator flashes rapidly.
- Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.
6.2 ログセッションの停止
To stop an active logging session:
- を押し続けます 停止 button for approximately 5 seconds until the ALERT indicator flashes rapidly.
- Release the button. The device will cease logging.
6.3 Marking Data
During an active logging session, you can insert a mark into the data stream:
- 短く押すと スタート/マーク button (less than 2 seconds).
- A mark will be recorded in the data, visible when the data is downloaded and analyzed.
7. データの取得とレポート
The UTRIX-16 generates a PDF report directly when connected to a computer.
- Connect the UTRIX-16 to a USB port on your computer.
- デバイスはリムーバブルドライブとして表示されます。
- Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
- For advanced analysis and configuration, use the LogTag アナライザーソフトウェア。
8. メンテナンス
8.1 クリーニング
柔らかくて清潔な布でデバイスを拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
8.2 電池の交換
The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.
9。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Device does not start logging. | Incorrect button press duration; device already logging; battery depleted. | Ensure the START/Mark button is held for approximately 5 seconds. Check if the device is already logging. Connect to LogTag Analyzer to check battery status. |
| コンピュータがデバイスを認識しません。 | USB 接続が緩んでいる、USB ポートに障害がある、ドライバーに問題がある。 | Ensure the USB connector is fully inserted. Try a different USB port. Reinstall LogTag アナライザーソフトウェア。 |
| PDF レポートは生成されません。 | Logging session not completed; device not recognized as a drive. | Ensure the logging session has been stopped. Verify the device appears as a removable drive. |
| ALERT indicator flashing. | Temperature exceeded pre-set limits. | This indicates an alert condition. Review the PDF report or LogTag Analyzer data to identify when and for how long the limits were exceeded. |
10. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | ユートリックス-16 |
| 温度範囲 | -25°C ～ +70°C (-13°F ～ +158°F) |
| 接続性 | 統合されたUSB |
| 電源 | 1 CR2 バッテリー (付属) |
| 製品寸法 | 3.66 x 2.15 x 0.34インチ |
| 重さ | 1.27オンス |
| 材料 | プラスチック |
| 特集 | High Accuracy, PDF Reporting |
11. 保証とサポート
ログTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webご購入の際は、サイトをご覧いただくか、お近くの販売店にお問い合わせください。購入証明書として領収書を保管してください。
Official LogTag Webサイト： www.ログtag-recorders.com