ブラウン 4189-652

Braun 4189-652 Hand Blender Wire Whip Instruction Manual

Original Equipment Manufacturer (OEM) Part

1.製品オーバーview

The Braun 4189-652 Hand Blender Wire Whip is an original equipment manufacturer (OEM) authorized replacement part designed for specific Braun hand blender models. This accessory is intended for tasks such as whipping cream, beating eggs, and preparing light batters.

互換性: This wire whip is compatible with various Braun hand blender models, including: 4179, 4185, 4189, 4193, MR4050, and MR430. Please verify your hand blender's model number to ensure proper fit and function.

パッケージ内容:

  • 1 x Braun 4189-652 Wire Whip
Braun 4189-652 Hand Blender Wire Whip

Image 1.1: The Braun 4189-652 Hand Blender Wire Whip. This image shows the stainless steel whisk attachment designed for Braun hand blenders.

2. 安全に関する注意事項

火災、感電、および/または人への傷害のリスクを軽減するために、電気製品を使用するときは常に基本的な安全上の注意事項に従ってください。

  • Unplug Before Assembly: Always ensure the hand blender is unplugged from the power outlet before attaching or detaching the wire whip.
  • 可動部品との接触を避ける: Keep hands, hair, clothing, and other utensils away from the wire whip during operation to prevent injury.
  • 安定した表面で使用する: Operate the hand blender with the wire whip on a stable, dry surface.
  • Do Not Immerse Motor Unit: Never immerse the motor unit of your hand blender in water or other liquids.
  • 子供たち: この機器は子供による使用を目的としていません。アプライアンスとそのコードは子供の手の届かないところに保管してください。
  • 損傷した部品: Do not use the wire whip if it appears damaged. Contact customer support for replacement.

3. セットアップと取り付け

  1. 電源がオフになっていることを確認します。 Make sure your Braun hand blender's motor unit is unplugged from the electrical outlet.
  2. 位置合わせと挿入: Hold the wire whip by its plastic collar. Align the top of the wire whip with the attachment port on the hand blender's motor unit. Gently push the wire whip into the port until it clicks securely into place.
  3. 安全な添付ファイルの検証: Give the wire whip a gentle tug to ensure it is firmly attached and will not detach during operation.

To detach the wire whip, ensure the hand blender is unplugged. Grip the wire whip firmly and pull it straight out from the motor unit.

4. 操作手順

The wire whip is ideal for incorporating air into ingredients, creating light and fluffy textures.

  1. 材料を準備します: Place the ingredients you wish to whip (e.g., cream, egg whites) into a deep bowl or container.
  2. Position the Whip: With the hand blender unplugged, attach the wire whip as described in Section 3. Once attached, immerse the wire whip into the ingredients.
  3. Plug In and Start: Plug the hand blender into a power outlet. Select the desired speed setting on your hand blender. Start at a low speed to prevent splashing, then gradually increase the speed as needed.
  4. ホイップ: Move the hand blender gently in a circular motion, ensuring the wire whip makes contact with all ingredients. Continue whipping until the desired consistency is achieved.
  5. 仕上げる: Once done, turn off the hand blender and unplug it from the power outlet. Carefully remove the wire whip from the ingredients.

注記: Do not operate the hand blender with the wire whip in an empty bowl for extended periods, as this can cause unnecessary wear.

5. メンテナンスと清掃

Proper cleaning and maintenance will extend the life of your wire whip.

  • 即時清掃: After each use, unplug the hand blender and detach the wire whip. Rinse the wire whip immediately under running water to remove food residue.
  • 手洗い: Wash the wire whip by hand using warm, soapy water and a soft brush or sponge. Rinse thoroughly.
  • 食器洗い機で安全ではありません: The Braun 4189-652 Wire Whip is 食器洗い機には対応していません. Washing it in a dishwasher may cause damage to the materials or finish.
  • 乾燥: Dry the wire whip completely before storing to prevent water spots or corrosion.
  • ストレージ: Store the clean, dry wire whip in a safe place, away from other utensils that could bend or damage the wires.

6。 トラブルシューティング

If you encounter issues with your wire whip, refer to the following common solutions:

問題考えられる原因解決
Wire whip does not attach securely.位置合わせが正しくないか、障害物があります。Ensure the hand blender is unplugged. Re-align the whip with the attachment port and push firmly until it clicks. Check for any food residue or debris in the port.
Whip is not effective.Too little liquid, incorrect speed, or damaged wires.Ensure sufficient liquid for whipping. Increase hand blender speed gradually. Inspect the wire whip for bent or broken wires; replace if damaged.
Whip is difficult to clean.Food residue dried on.Clean immediately after use. Soak in warm, soapy water for a few minutes before scrubbing with a soft brush.

7. 仕様

特徴詳細
部品番号4189-652
ブランドブラウン
モデル番号4189-652
材料ステンレス鋼
製品寸法(奥行き×幅×高さ)奥行き2インチ x 幅2インチ x 高さ5インチ
特集取り外し可能なアタッチメント
推奨用途鞭打ち
食器洗い機対応いいえ
メーカーブラウン
製造国アメリカ合衆国

8. 保証とサポート

As an Original Equipment Manufacturer (OEM) authorized part, the Braun 4189-652 Hand Blender Wire Whip is designed to meet the quality standards of Braun products. For specific warranty information regarding this replacement part, please refer to the warranty documentation provided with your original Braun hand blender motor unit, or contact Braun customer support directly.

For further assistance or to inquire about other Braun products, please visit the official Braun store: Amazonのブラウンストア.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.