画像1: The Instapark ADF Series GX600 Solar Powered Auto-Darkening Welding Helmet, shown from a front-side perspective.
導入
This manual provides essential instructions for the safe and effective use of your Instapark ADF Series GX600 Solar Powered Auto-Darkening Welding Helmet. Please read this manual thoroughly before operation to ensure proper function, safety, and longevity of the product. Retain this manual for future reference.
安全上の注意
Always prioritize safety when welding. This helmet is designed to protect your eyes and face from sparks, spatter, and harmful radiation under normal welding conditions. However, it does not provide protection against severe impact hazards, explosive devices, or corrosive liquids. Always wear appropriate safety glasses underneath the helmet.
- Do not use the helmet if the auto-darkening filter (ADF) is damaged or cracked.
- Ensure the helmet is properly adjusted to your head for a secure and comfortable fit.
- ヘルメットを水に浸さないでください。
- Replace front cover lenses regularly to maintain clear vision.
- Always inspect the helmet before each use for any signs of damage.
コンポーネントと機能
The Instapark ADF Series GX600 welding helmet is equipped with advanced features for optimal performance and user comfort.
画像2: Diagram illustrating key features of the Instapark ADF Series GX600 welding helmet, including solar cells, dual arc sensors, UV/IR coated auto-darkening lens, external shade selection, 5-point adjustable ratcheting headgear, and impact-resistant Nylon construction.
- 自動暗くするフィルター（ADF）： Automatically switches from light to dark in 1/25000s when an arc is struck.
- 太陽光発電: Built-in solar panel charges the internal battery.
- Dual Arc Sensors: Ensures instantaneous auto-darkening.
- Adjustable Shade Range: Variable shade from #5 to #13, with a resting shade of #4.
- 広い Viewingエリア： 明確な view of the welding area.
- UV / IR保護： Constant DIN 16 protection against harmful ultraviolet and infrared radiation.
- Ratcheting Headgear: 5-point adjustable system for a custom, comfortable fit.
- 研削機能: Allows the helmet to be used in grinding mode without darkening.
セットアップと調整
Before using your welding helmet, proper setup and adjustment are crucial for comfort and safety.
1. ヘッドギアの調整
画像3: インテリア view of the Instapark ADF Series GX600 welding helmet, highlighting the adjustable ratcheting headgear and the auto-darkening filter module.
- Loosen the tension knob on the side of the helmet to adjust the helmet's position relative to your face.
- 頭頂部にフィットするように上部のストラップを調整します。
- Use the ratcheting knob at the back of the headgear to tighten or loosen the band around your head until it feels secure and comfortable.
- Ensure the helmet sits evenly and the viewingエリアが目の中心になります。
2. バッテリーの取り付け/確認
The helmet is powered by a solar cell and two replaceable CR2032 lithium batteries (included). The solar cell extends battery life, but the CR2032 batteries provide primary power and backup.
- The helmet is fully automatic; there is no manual on/off switch.
- Ensure the CR2032 batteries are correctly installed with the positive (+) side facing up.
- A low volume alarm will sound if the batteries are low, indicating they need replacement.
操作手順
Familiarize yourself with the controls before beginning any welding task.
画像4: 前面 view of the Instapark ADF Series GX600 welding helmet, showing the external shade selection knob for convenient adjustment.
1. Shade Adjustment
- The external dial on the side of the helmet allows for continuous adjustment of the dark shade from #5 to #13.
- Select the appropriate shade level based on your welding process and amperage。目安として、標準溶接シェードチャートを参照してください。
- The resting shade is DIN 4.
2. 感度コントロール
- The sensitivity control (usually an internal knob) adjusts how much light is required to trigger the auto-darkening function.
- Adjust from Low to High continuously to suit different ambient light conditions and welding processes. Higher sensitivity is generally used for low amperage TIG溶接。
3. Delay Control (Dark to Light)
- The delay control (usually an internal dial) adjusts the time it takes for the filter to return from dark to light state after the arc stops.
- Adjustable from 0.1 to 1.0 seconds. A longer delay helps prevent eye fatigue from afterglow or multiple short arcs.
4. Grinding Function
- The helmet includes a grinding function. Activate this mode (typically via an internal switch) to prevent the filter from darkening while grinding.
- Always ensure the grinding function is OFF before welding to ensure eye protection.
5. Welding Applications
This helmet is suitable for most Stick (arc welding), MIG (Metal Inert Gas), and TIG (Tungsten Inert Gas) applications. For TIG welding, the low amperage capability is ≥ 5A (DC).
メンテナンス
定期的なメンテナンスにより、溶接ヘルメットの最適なパフォーマンスと寿命が確保されます。
- クリーニング： Clean the helmet shell with mild soap and water. Do not use harsh solvents. Clean the auto-darkening filter and cover lenses with a soft, lint-free cloth.
- Cover Lens Replacement: Replace the front and inner cover lenses when they become scratched, pitted, or too dirty to clean effectively.
- バッテリー交換: Replace the CR2032 batteries when the low volume alarm sounds or if the ADF fails to darken. Ensure correct polarity.
- ストレージ： Store the helmet in a dry, clean environment away from direct sunlight and extreme temperatures.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| アーク放電が発生しても ADF は暗くなりません。 |
|
|
| Poor visibility through the filter. |
|
|
| ヘルメットが不快または緩く感じます。 |
|
|
仕様
- 光学クラス： 1/1/1/2
- Number of Arc Sensors: 2
- Light Shade Number: 4 規格
- ダークステート: Variable shade, 5 ~ 13
- 電源オン/オフ: 完全自動
- 感度制御： Low — High, continuously adjustable
- UV / IR保護： DIN 16 (constant)
- 電源： Solar cell, 2×CR2032 lithium battery (included)
- スイッチング時間 (明から暗): 1/25000秒
- Dark to Light Delay: 0.1~1.0S by dial control knob
- 低い Amperage TIG: ≥ 5A (DC)
- 研削機能: はい
- Low Volume Alarm: はい
- ADFセルフチェック: はい
- Viewingエリア： 4 x 2インチ
- 材料： Plastic (Impact-resistant Nylon)
- 重さ： 680グラム
- 寸法: 23.88 x 23.11 x 34.04 cm
- 規格: Conforms to GS, DIN-Geprüft, CE, ANSI Z87.1, CSA Z94.3, AS/NZS standards.
保証とサポート
Specific warranty details are not provided within this manual. For information regarding warranty coverage, technical support, or replacement parts, please refer to the original purchase documentation or contact Instapark customer service directly. Contact information can typically be found on the product packaging or the official Instapark webサイト。