TFA Dostmann 30.3060.01 Wireless Thermometer/Hygrometer Instruction Manual

1. はじめに

This manual provides essential information for the proper setup, operation, and maintenance of your TFA Dostmann 30.3060.01 Wireless Thermometer/Hygrometer. This device allows you to monitor temperature and humidity in up to four different locations simultaneously, both indoors and outdoors, contributing to a comfortable and healthy living environment.

2. 安全情報

• デバイスを使用する前に、この取扱説明書をよくお読みください。
• このマニュアルは将来の参照用に保管してください。
• デバイスを極端な温度、振動、または衝撃にさらさないでください。
• 直射日光や湿気を避けてください。
• Use only the specified battery type (AA). Ensure correct polarity when inserting batteries.
• 古い電池と新しい電池、または異なる種類の電池を混ぜて使用しないでください。
• Remove depleted batteries promptly to prevent leakage.
• 電池はお子様の手の届かないところに保管してください。
• デバイスを分解したり改造したりしないでください。

3. パッケージ内容

• 1x Main Display Unit (TFA Dostmann 30.3060.01)
• 3x Wireless Transmitters (for temperature and humidity)
• 取扱説明書

4.デバイスオーバーview

メインディスプレイユニット

The main unit displays temperature, humidity, time, and date for up to four channels. It features a large display for easy readability and control buttons for settings.

画像1: Main Display Unit. This image shows the front of the TFA Dostmann 30.3060.01 main display unit. The screen is divided into sections, displaying current time, date, indoor temperature and humidity, and readings from three external wireless sensors, each with a colored label (Schlafen, Kidz, Garten - German for Sleep, Kids, Garden). Control buttons are visible at the bottom.

ワイヤレストランスミッタ

The three wireless transmitters measure temperature and humidity at their respective locations and transmit the data to the main display unit. They are designed for both indoor and outdoor use.

5. バッテリーの取り付け

1. メインディスプレイユニット: Open the battery compartment on the back of the main unit. Insert the required AA batteries, ensuring correct polarity (+/-). Close the compartment.
2. Wireless Transmitters: Open the battery compartment on each transmitter. Insert the required AA batteries, observing correct polarity. Close the compartment.
3. The main unit will automatically begin searching for signals from the transmitters once powered on.

注記： A total of 9 AA batteries are required (e.g., 3 for the main unit, 2 for each of the 3 transmitters, or as specified in the product packaging).

6. セットアップとペアリング

1. 初回電源投入: After inserting batteries into both the main unit and all transmitters, the main unit will power on and start searching for signals.
2. 送信機の配置: Place the wireless transmitters in your desired monitoring locations (e.g., bedroom, children's room, cellar, outdoors). Ensure they are within the transmission range of the main unit and not obstructed by large metal objects.
3. 自動ペアリング： The main unit should automatically detect and display readings from the transmitters. This process may take a few minutes.
4. 手動チャンネル選択: Use the 'CH' button on the main unit to cycle through the different channels (transmitters) or to view all channels in rotation.
5. 時刻と日付の設定: Use the 'SET' button to enter the time and date setting mode. Use the '+' and '-' buttons to adjust values and 'SET' to confirm and move to the next setting. The device features a radio-controlled clock for automatic synchronization.
6. Labeling Measurement Points: The main unit allows for individual labeling of measurement points (as seen in Image 1). Refer to the on-screen prompts or specific manual section for detailed instructions on customizing these labels.

7. 操作

Reading Temperature and Humidity

The main display unit shows current temperature and relative humidity for the indoor sensor (integrated into the main unit) and each connected wireless transmitter. The ideal indoor temperature range is 18°C to 22°C, with relative humidity between 40% and 60%.

時刻と日付の表示

The device displays the current time (to the second) and the full date, automatically synchronized via its radio-controlled clock function.

WeatherHub SmartHome Integration (Optional)

This device can connect to the WeatherHub SmartHome system (sold separately). This allows you to access your temperature and humidity data remotely via a smartphone application. Refer to the WeatherHub SmartHome system's manual for integration instructions.

8. メンテナンス

• クリーニング： Clean the device and transmitters with a soft, damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
• バッテリー交換: ディスプレイに電池残量低下のインジケーターが表示されたら、電池を交換してください。必ずユニット内のすべての電池を同時に交換してください。
• ストレージ： デバイスを長期間保管する場合は、液漏れを防ぐためにすべての電池を取り外してください。

9。 トラブルシューティング

• ディスプレイ/電源なし: 電池の取り付けを確認し、電池が新しいものであることを確認します。
• センサー読み取りなし: Ensure transmitters have fresh batteries and are within range of the main unit. Press the 'CH' button to re-scan for channels. Reduce obstacles between the main unit and transmitters.
• 時刻/日付が正しくありません: Ensure the device is in an area with good radio signal reception for the radio-controlled clock. Manually set the time if automatic synchronization fails.
• 一貫性のない測定値: Ensure sensors are not exposed to direct sunlight, heat sources, or excessive moisture, which can affect accuracy.

10. 仕様

11. 保証とサポート

保証情報およびテクニカルサポートについては、ご購入時に付属のマニュアルを参照するか、TFA Dostmannの公式ウェブサイトをご覧ください。 webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。