1.製品オーバーview
The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp タッチコントロールのlに金属ソケットを差し込むamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.
Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lampの電源コード。
2. 安全情報
- lを確保するamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
- This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- 常にlのプラグを抜いてくださいamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
- ユニットを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
- お子様の手の届かない場所に保管してください。
- lを確保するamp you intend to convert has a metal socket for proper touch functionality.
3. パッケージ内容
- 1 x Utilitech White Touch Lamp コントロールユニット
4. セットアップとインストール
- Lを準備するamp: あなたのlを確認してくださいamp has a metal socket. Unplug the lamp その動力源から。
- コントロールユニットを接続します。 Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
- Lを接続しますamp: あなたのlを差し込むamp's power cord into the receptacle on the Utilitech Touch Lamp 制御ユニット。
- Verify Bulb Type: lを確認しますamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
- 初期テスト: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.
重要な注意: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.
5. 操作手順
The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.
- To Turn On (Low Brightness): Touch any metal part of the lamp。 lamp will illuminate at its lowest brightness setting (night light).
- To Increase Brightness (Medium): lをタッチamp again. The brightness will increase to a medium level.
- To Increase Brightness (High): lをタッチamp a third time. The brightness will increase to its highest level (full brightness).
- 電源を切るために： lをタッチamp a fourth time. The lamp オフになります。
The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.
6. メンテナンス
- クリーニング： Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- 電球の交換: 常にlのプラグを抜いてくださいamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
- ストレージ： If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lamp does not turn on or respond to touch. |
|
|
| Lamp ちらついたり、不規則に暗くなったりします。 |
|
|
| Lamp stays on or off. |
|
|
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ユーティリテック |
| モデル番号 | 25991 |
| 色 | 白 |
| 制御方法 | 触る |
| 光源タイプの互換性 | 白熱灯 |
| 最大ワットtage | 200ワット |
| 巻tage | 120ボルト |
| 特集 | 調光可能（3段階） |
| 屋内/屋外での使用 | 屋内 |
| 取り付けタイプ | プラグインマウント |
| アイテム重量 | 2.78オンス |
| パッケージ寸法 | 8.66 x 4.92 x 2.6インチ |
9. 保証とサポート
For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.