Lexmark 12B0090 High Yield Toner Cartridge User Manual

1. はじめに

This manual provides essential instructions for the proper installation, operation, and maintenance of your Lexmark 12B0090 High Yield Toner Cartridge. This genuine Lexmark product is designed to deliver consistent, high-quality print output for Lexmark Optra W820 and X820 Series printers. Please read this manual thoroughly before installing or using the cartridge.

2. 安全情報

• トナーカートリッジは子供の手の届かないところに保管してください。
• Do not incinerate used toner cartridges. Toner dust can ignite when exposed to an open flame.
• トナーの粉塵を吸い込まないようにしてください。トナーがこぼれた場合は、amp cloth to wipe it up. Do not use a vacuum cleaner, as the fine toner particles may cause an explosion or damage the vacuum.
• Do not attempt to disassemble the toner cartridge.
• Store the cartridge in its original packaging until ready for use, in a cool, dry place away from direct sunlight.

3. セットアップとインストール

Follow these steps to install the Lexmark 12B0090 toner cartridge into your compatible Lexmark Optra W820 or X820 Series printer:

1. カートリッジを開梱します。 Carefully remove the new toner cartridge from its packaging. Retain the packaging for proper disposal of the old cartridge.
2. カートリッジを軽く振ってください: Hold the cartridge horizontally and gently rock it from side to side 5-6 times to distribute the toner evenly inside.
3. 保護材を取り除く: Remove any protective tape, seals, or covers from the cartridge as indicated by the instructions on the cartridge itself. Be careful not to touch the green imaging drum.
4. プリンターアクセスドアを開きます: Open the front cover or access door of your Lexmark Optra W820 or X820 Series printer. Refer to your printer's user manual for specific instructions on accessing the toner compartment.
5. 古いカートリッジを取り外す: Grasp the handle of the old toner cartridge and pull it straight out of the printer. Place the old cartridge into the packaging from the new cartridge for recycling.
6. 新しいカートリッジを挿入してください: Align the new Lexmark 12B0090 toner cartridge with the guides inside the printer and slide it firmly into the slot until it clicks into place. Ensure it is seated securely.
7. プリンターアクセスドアを閉じる: プリンターの前面カバーまたはアクセスドアを閉じます。通常、プリンターは短いキャリブレーションサイクルを実行します。

Image: The Lexmark 12B0090 High Yield Toner Cartridge shown in its retail packaging, ready for installation.

4.運用

Once the Lexmark 12B0090 toner cartridge is correctly installed, your Lexmark Optra W820 or X820 Series printer will automatically detect it and manage toner usage. The printer's control panel or software will indicate toner levels and alert you when the cartridge is nearing depletion. This high-yield cartridge is designed for approximately 30,000 pages at 5% coverage, providing extended printing before replacement is needed.

5. メンテナンス

• ストレージ： Store unused toner cartridges in their sealed original packaging in a cool, dry environment, away from direct sunlight and extreme temperatures.
• 取り扱い： Always handle the toner cartridge by its designated handles or edges. Avoid touching the imaging drum surface, as oils from your skin can affect print quality.
• 廃棄： When the cartridge is empty, dispose of it responsibly. Lexmark offers recycling programs for used toner cartridges. Visit the official Lexmark website for information on their recycling initiatives.

6。 トラブルシューティング

6.1. 印刷品質が悪い

• 色あせたまたは薄いプリント: Gently remove the toner cartridge and rock it from side to side to redistribute the toner. Reinstall and try printing again. If the issue persists, the cartridge may be low on toner.
• 縞や汚れ: Ensure the cartridge is properly seated. Check for any protective seals or tape that may not have been fully removed during installation. If the issue continues, the printer's internal components may require cleaning (refer to your printer's manual).
• 空白のページ: Verify that all protective packaging materials, including any sealing strips, have been completely removed from the cartridge. Reinstall the cartridge firmly.

6.2. カートリッジが認識されない

• カートリッジを再インストールします: Remove the cartridge and reinstall it, ensuring it clicks securely into place.
• 障害物の確認: Ensure no packaging material or foreign objects are preventing proper contact between the cartridge and the printer.
• 清潔なコンタクト: With the printer powered off and unplugged, gently wipe the metal contacts on the cartridge and inside the printer with a lint-free cloth.
• プリンターを再起動します: Turn the printer off, wait a few seconds, and then turn it back on.

7. 仕様

8. 保証情報

For specific warranty details regarding your Lexmark 12B0090 toner cartridge, please refer to the documentation included with your purchase or visit the official Lexmark website. Warranty terms typically cover manufacturing defects and vary by region and retailer.

9. サポート

If you require further assistance or have questions not covered in this manual, please contact Lexmark customer support or visit their official support website. You can typically find contact information and support resources on the Lexmark website or through your product's original purchase documentation.

Lexmark Official Webサイト： 詳しくはこちら