1.製品オーバーview
The Testo 175 T3 temperature logger is designed for precise temperature recording across two channels using external thermocouple probes (Type T or Type K). It is suitable for applications requiring simultaneous temperature monitoring, such as heating system checks or industrial process control. The device features a clear display for current, min/max values, limit violations, and battery life, ensuring high data security with a large memory capacity and long battery life.
図1: 前面 view of the Testo 175 T3 Temperature Logger, showing its display and control button.
Figure 2: The Testo 175 T3 in use within a meat display case, demonstrating its application in food temperature monitoring.
Figure 3: The Testo 175 T3 mounted inside a refrigerated transport vehicle, illustrating its use for monitoring temperatures during transit.
2.ボックスの内容
開梱したら、すべてのコンポーネントが揃っていることを確認してください。
- Testo 175 T3 temperature logger (2-channel, with external sensor connections for thermocouple type T and type K)
- ウォールブラケット
- ロック
- バッテリー（3 x AAA）
- 校正プロトコル
注記： External thermocouple probes and a USB cable for programming/reading are sold separately and are required for full functionality.
3. セットアップ
- バッテリーの取り付け: The Testo 175 T3 uses 3 AAA batteries. These are included. Ensure correct polarity when inserting. The logger is designed to retain saved measurement data even if batteries are empty or replaced.
- 取り付け: Use the provided wall bracket to securely mount the logger in the desired measurement location.
- プローブ接続： Connect the external thermocouple probes (Type T or Type K, purchased separately) to the two designated connections on the logger. The logger requires at least one external probe to be connected for operation.
- 初回電源オン: Once batteries are installed and probes connected, the device will power on. The display will show current readings.
4. 操作手順
4.1. 情報を表示する
The clear display provides the following information:
- Current measuring values for both channels.
- Minimum (Min) and Maximum (Max) recorded values.
- Set limit values.
- Indications of limit value violations.
- Remaining battery life.
4.2.データロギング
The Testo 175 T3 automatically logs data at a user-defined measuring rate, ranging from 10 seconds to 24 hours. It has a memory capacity of up to 1 million readings.
4.3. Programming and Data Analysis
To program the data logger and analyze measurement data, a USB cable (optional) and software are required. Three software versions are available:
- ComSoft Basic: Free download for fast programming and easy data analysis.
- ComSoft Professional: Optional purchase for more detailed analysis possibilities.
- ComSoft CFR 21 Part 11: Optional purchase, suitable for pharmaceutical sector requirements (CFR 21 Part 11).
Figure 4: The Testo 175 T3 connected to a laptop for programming and data analysis using ComSoft software.
5. メンテナンス
- クリーニング： The device has an IP65 protection class, offering protection against dust ingress and water spray/jets. For cleaning, wipe the exterior with a damp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- バッテリー交換: When the battery indicator shows low power, replace the 3 AAA batteries. Ensure the device is powered off before replacement. Data security is maintained during battery changes.
- 較正： Regular calibration is recommended to ensure continued accuracy. Refer to the calibration protocol included with your device for details.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| デバイスの電源がオンになっていません。 | 電池が切れているか、正しく取り付けられていない。 | Replace batteries (3 x AAA) and ensure correct polarity. |
| No temperature readings displayed. | No external probe connected or probe faulty. | Connect at least one external thermocouple probe. Check probe connection and integrity. |
| Cannot connect to PC for data transfer. | USB cable not connected, driver issue, or software not running. | Ensure USB cable is securely connected. Install necessary drivers. Launch ComSoft software. |
| 不正確な測定値。 | Probe damage or calibration required. | Inspect probes for damage. Consider professional calibration. |
7. 技術仕様
| パラメータ | 価値 |
|---|---|
| Temperature - TC Type K (NiCr-Ni) | |
| 測定範囲 | -50 ～ +1000 °C |
| 正確さ | ±0.5 °C (-50 to +70 °C), ±0.7 % of mv (+70.1 to +1000 °C) |
| 解決 | 0.1℃ |
| Temperature - TC Type T (Cu-CuNi) | |
| 測定範囲 | -50 ～ +400 °C |
| 正確さ | ±0.5 °C (-50 to +70 °C), ±0.7 % of mv (70.1 to +1000 °C) |
| 解決 | 0.1℃ |
| 一般的な技術データ | |
| 保管温度 | -20 ～ +55 °C |
| 寸法 | 89 x 53 x 27 ミリメートル |
| 動作温度 | -20 ～ +55 °C |
| 保護クラス | IP65 |
| チャンネル | 2外部 |
| 測定速度 | 10 s - 24 h |
| 電池のタイプ | 3 x AIMn type AAA or Energizer |
| バッテリー寿命 | 3 years at 15 min. meas. rate |
| メモリ | 1,000,000 測定値 |
| アイテム重量 | 130グラム |
| 材料 | ポリカーボネート（PC） |
| 表示タイプ | 液晶 |
| 接続性 | USB (with optional cable) |
8. 保証情報
The Testo 175 T3 Temperature Logger comes with a 2年間保証. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the documentation provided with your product or contact Testo customer support.
9. サポートとお問い合わせ
For technical support, software downloads (ComSoft Basic), or inquiries regarding optional accessories (probes, USB cable, ComSoft Professional/CFR 21 Part 11), please visit the official Testo website or contact your local Testo distributor. Contact information can typically be found on the Testo official webサイト。