Polk Audio T50

Polk Audio T50 Floor Standing Tower Speaker Instruction Manual

モデル: T50

ブランド: Polk Audio

導入

The Polk Audio T50 Floor Standing Tower Speaker is engineered to deliver powerful, high-performance sound for both home theater and stereo applications. Featuring Polk's Dynamic Balance technology, a 1-inch silk dome tweeter, a 6.25-inch composite driver, and two front-firing sub-bass radiators, the T50 provides crisp highs, detailed mids, and deep, impactful bass. It is designed to integrate seamlessly into most home theater receivers and stereos, supporting Dolby and DTS for an immersive audio experience.

箱の中身

  • 1 x Polk Audio T50 Tower Speaker
  • スピーカーグリル×1
  • 保証登録カード

設定

Setting up your Polk Audio T50 Tower Speaker is designed to be straightforward. Follow these steps for optimal performance:

  1. 配置: Position the tower speakers in your listening area, ensuring they are equidistant from your primary listening position for a balanced soundstage. For home theater setups, place them to the left and right of your television or projection screen.
  2. 接続: Connect the speaker wire from your AV receiver or stereo amplifier to the 5-way binding posts on the back of the T50 speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.
  3. グリルアタッチメント: The speaker grille can be attached magnetically to the front of the speaker for protection and aesthetic preference.
  4. システム統合: The T50 speakers are timbre-matched with other Polk T-Series speakers, allowing for seamless integration into a larger surround sound system (e.g., with T15 surrounds and a T30 center channel).
Close-up of Polk Audio T50 speaker binding posts

図1:背面 view of the Polk Audio T50 speaker showing the 5-way binding posts for easy and secure wire hookup.

Two Polk Audio T50 tower speakers flanking a TV in a living room

図2:例ample placement of two Polk Audio T50 tower speakers in a home theater setup, demonstrating seamless sound integration.

ビデオ1: オーバーview of the Polk T-Series speakers, highlighting their design and features for home audio setups.

オペレーティング

Once properly connected, your Polk Audio T50 speakers will operate in conjunction with your audio receiver or amplifier. Ensure your receiver is powered on and set to the correct input source. Adjust volume levels on your receiver. The T50 speakers are designed to reproduce a wide range of frequencies, providing clear audio for movies, music, and games.

Polk Audio T50 tower speaker in a modern living room setup

Figure 3: The Polk Audio T50 speaker integrated into a home audio environment, ready for use.

メンテナンス

To ensure the longevity and optimal performance of your Polk Audio T50 speakers, follow these simple maintenance guidelines:

  • クリーニング: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
  • グリルのお手入れ: The speaker grilles can be carefully removed and dusted. If necessary, they can be gently vacuumed with a soft brush attachment.
  • 環境: Place speakers in a stable location away from direct sunlight, excessive heat, moisture, or extreme temperature changes. Ensure adequate ventilation around the speakers.
  • 接続: スピーカーの配線接続が安全で腐食していないことを定期的に確認してください。

トラブルシューティング

If you encounter issues with your Polk Audio T50 speakers, consider the following common troubleshooting steps:

  • 音が出ない:
    • Verify that your AV receiver or amp機器の電源がオンになっており、正しい入力ソースが選択されています。
    • Check all speaker wire connections at both the speaker and the receiver for proper polarity and secure contact.
    • Ensure the volume on your receiver is not muted or set too low.
  • 歪んだ音:
    • Reduce the volume level on your receiver.
    • Check speaker wire connections for any loose strands that might be touching each other or the wrong terminal.
    • Ensure your receiver's impedance settings match the speaker's impedance (6 Ohms).
  • 不均一な音:
    • Confirm that both speakers are connected with correct polarity.
    • Check speaker placement to ensure they are symmetrically positioned relative to your listening area.
    • Adjust the balance settings on your AV receiver.

仕様

特徴仕様
取り付けタイプ床立ち
材料木材
モデル名T50
スピーカータイプタワー
特集Hi-Res Audio, Multi-Room Audio
推奨用途サラウンドサウンドシステム用
対応デバイスMost Home Theater AV Receivers
サブウーファーの直径6.5インチ
ユニット数1.0 カウント
サラウンドサウンドチャンネル構成2.1、5.1
製品寸法奥行き7.75インチ x 幅8.75インチ x 高さ36.25インチ
アイテム重量20.35 ポンド
インピーダンス6オーム
最大範囲7メートル
制御方法触る
スピーカーサイズ6.5インチ
電源コード式電気
ウーファー直径6インチ
ツイーター直径1インチ
オーディオドライバータイプダイナミックドライバ
オーディオドライバーのサイズ6.25インチ
スピーカー最大出力150ワット
周波数応答24000Hz
接続技術有線
オーディオ出力モード囲む
Dimensions of the Polk Audio T50 tower speaker

Figure 4: Detailed dimensions of the Polk Audio T50 Floor Standing Tower Speaker.

保証

The Polk Audio T50 Floor Standing Tower Speaker comes with a Full Warranty. Please refer to the included Warranty Registration Card for specific terms, conditions, and registration details. Retain your proof of purchase for any warranty claims.

サポート

For further assistance, technical support, or service inquiries regarding your Polk Audio T50 speakers, please visit the official Polk Audio website or contact their customer service department. You can find contact information on the Warranty Registration Card or the brand's official webサイト。

© 2026 Polk Audio. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.