Arducam Mini Module Camera Shield OV2640 (Model B0067) User Manual

1. はじめに

The Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens (Arducam-M-2MP, SKU: B0067) is a high-definition SPI camera designed to simplify camera integration with various microcontroller platforms. This module features a 2MP OV2640 CMOS image sensor and offers a compact form factor, an easy-to-use hardware interface, and an open-source code library. It is compatible with platforms such as Arduino, Raspberry Pi, Maple, Chipkit, and Beaglebone Black, provided they have SPI and I2C interfaces. This camera module enables the addition of camera capabilities to microcontrollers that may lack native camera interfaces and supports the use of multiple cameras with a single microcontroller.

主な特徴:

• 2 Megapixels OV2640 image sensor with built-in 650nm IR block filter for visible light capture.
• M12 mount lens holder, allowing for changeable lens options.
• I2C interface for sensor configuration.
• SPI interface for camera commands and data streaming.
• All I/O ports are 5V/3.3V tolerant.
• Supports JPEG compression, single and multiple shoot modes, one-time capture with multiple read operations, burst read operations, and low power modes.

Figure 1: Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens.

2. 箱の中身

パッケージには次のアイテムが含まれています:

• 1 x Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens

3. セットアップ

3.1ハードウェア接続

The Arducam Mini Module connects to your microcontroller via SPI and I2C interfaces. Ensure proper pin connections for power (VCC, GND), SPI (CS, MOSI, MISO, SCK), and I2C (SDA, SCL). All I/O ports on the module are tolerant to both 5V and 3.3V logic levels.

Figure 2: Pinout diagram for the Arducam Mini Module Camera Shield. Connect pins 1-8 to your microcontroller's corresponding SPI and I2C ports.

3.2 ソフトウェアのセットアップ

Arducam provides open-source code libraries for various platforms to facilitate easy integration. These libraries are available for Arduino, STM32, Chipkit, Raspberry Pi, and BeagleBone Black. Refer to the official Arducam documentation and GitHub repositories for the latest libraries and example code specific to your development environment.

Figure 3: Compatibility table showing supported boards, development environments, and SDK versions.

For Arduino users, the module is designed to be well-mated with standard Arduino boards like UNO and Mega2560. Install the Arducam library through your Arduino IDE's Library Manager.

4. 操作手順

The Arducam Mini Module offers flexible operation modes for image capture and data handling.

4.1 Image Capture Modes

• JPEG Compression Mode: Captures images in JPEG format, reducing file size for efficient storage and transmission.
• Single Shoot Mode: Captures a single image upon command.
• Multiple Shoot Mode: Captures a series of images.
• One-Time Capture Multiple Read Operation: Captures an image once and allows for multiple reads of the captured data.
• Burst Read Operation: Enables rapid reading of image data.

4.2 センサー構成

The OV2640 sensor parameters, such as resolution, exposure, and white balance, are configured via the I2C interface. Refer to the Arducam library documentation for specific I2C commands and register settings.

4.3データストリーム

Image data and camera commands are communicated through the SPI interface. The provided software libraries abstract much of this complexity, allowing users to focus on application development.

5. メンテナンス

To ensure the longevity and optimal performance of your Arducam Mini Module Camera Shield, follow these maintenance guidelines:

• 取り扱い： Always handle the module by its edges to avoid touching the lens or electronic components. Electrostatic discharge (ESD) can damage sensitive electronics, so use appropriate precautions.
• クリーニング： Keep the lens clean and free from dust and fingerprints. Use a soft, lint-free cloth specifically designed for optical lenses. Avoid using harsh chemicals.
• ストレージ： Store the module in a dry, cool environment, away from direct sunlight and extreme temperatures. Use anti-static bags if available.
• 環境条件: Avoid exposing the module to moisture, corrosive substances, or excessive vibrations.

6。 トラブルシューティング

If you encounter issues with your Arducam Mini Module Camera Shield, consider the following troubleshooting steps:

• 画像なし/黒い画面:
  • Verify all electrical connections (SPI, I2C, VCC, GND) are secure and correctly wired according to the pinout diagram.
  • Ensure the power supply to the microcontroller and camera module is stable and within the specified voltage範囲。
  • Check if the correct software library is installed and initialized properly in your code.
  • Confirm that the camera module is enabled in your software.
• Garbled or Corrupted Images:
  • Check SPI communication speed. Some microcontrollers might require a slower SPI clock for stable data transfer.
  • Ensure sufficient power supply, as voltage drops can lead to data corruption.
  • Verify that the image buffer size in your code is adequate for the selected resolution.
• モジュールが検出されません:
  • Double-check I2C connections (SDA, SCL) and ensure the I2C address is correctly configured in your software.
  • Confirm that the microcontroller's I2C bus is functioning correctly.
• ソフトウェア エラー:
  • Refer to the Arducam official documentation and community forums for known issues and solutions related to specific platforms and libraries.
  • Ensure your development environment (e.g., Arduino IDE) and libraries are up to date.

7. 仕様

8. 保証

This Arducam Mini Module Camera Shield comes with a 6ヶ月保証 ご購入日から1年間有効です。本保証は、通常の使用における製造上の欠陥および故障を対象としています。保証請求の際は、購入証明書を保管してください。

9. サポート

For technical assistance, additional documentation, or to access the latest software libraries and examples, please visit the official Arducam website or their support forums. You can also find resources and contact information on the AmazonのArducamストア.