XUNZEL INLI150RU

XUNZEL 150W パワーインバータ(USB 対応)ユーザーマニュアル

ブランド: XUNZEL | モデル: INLI150RU

1. はじめに

ご購入ありがとうございますasing the XUNZEL 150W Power Inverter with USB. This device converts 12V DC power from your vehicle's battery into 230V AC power at 50Hz, allowing you to power various electronic devices on the go. It is designed to be compact, lightweight, and easy to install, featuring both an AC outlet and a USB port for versatile use.

重要な安全情報

  • インバータを操作する前にすべての指示をお読みください。
  • インバータを雨、湿気、極端な温度にさらさないでください。
  • 過熱を防ぐために、動作中はインバータの周囲に適切な換気を確保してください。
  • インバーターをAC配電配線に接続しないでください。
  • お子様の手の届かない場所に保管してください。
  • 使用していないときや清掃する前には、必ずインバータを電源から外してください。
  • This inverter is designed for 12V DC input only. Do not attempt to connect it to a 24V system or higher.

2.製品オーバーview

The XUNZEL 150W Power Inverter is a compact and efficient solution for powering your devices. It features a modified sine wave output and includes essential safety protections.

主な特徴:

  • 150W continuous power output, 300W peak power.
  • Converts 12V DC to 230V AC (modified sine wave).
  • Integrated AC outlet with child protection.
  • USB充電ポートを内蔵。
  • High-quality DC cables with cigarette lighter plug for easy use.
  • Comprehensive protection against overvoltage、undervoltage、および過負荷。
  • Compact and round design for portability.

製品図

XUNZEL 150W Power Inverter with USB, showing the main unit with attached cigarette lighter plug.

Figure 2.1: XUNZEL 150W Power Inverter. This image displays the XUNZEL 150W Power Inverter. The cylindrical black unit features a green label indicating 'DC/AC POWER INVERTER 150W USB'. The top of the unit has a red power switch, an AC outlet, and a USB port. A cable with a cigarette lighter plug extends from the base of the inverter.

3. セットアップとインストール

  1. 車両互換性: お車に12V DCシガーライターソケットが装備されていることを確認してください。このインバーターは24Vシステムには対応していません。
  2. 配置: インバーターは、風通しの良い安定した平らな場所に設置してください。熱源、可燃物、直射日光の当たる場所に置かないでください。
  3. 繋がり: Insert the cigarette lighter plug of the inverter firmly into your vehicle's 12V accessory socket. Ensure a secure connection.
  4. 電源オン: Once connected, press the red power switch on the inverter to turn it on. The LED indicator will illuminate, signifying that the inverter is ready for use.
  5. デバイス接続: You can now plug your AC-powered devices (up to 150W continuous) into the AC outlet or your USB-powered devices into the USB port.

注記: For optimal performance and safety, ensure the total power consumption of your connected devices does not exceed the inverter's continuous power rating of 150W.

4. 操作手順

オン/オフ

  • To turn on the inverter, press the red power switch. The LED indicator will light up.
  • To turn off the inverter, press the red power switch again. The LED indicator will turn off.

ACコンセントの使用

  • Ensure the inverter is turned on.
  • Plug your AC-powered device into the 230V AC outlet on the inverter.
  • Verify that the device's power consumption does not exceed 150W. For devices with motors or compressors, consider their startup (peak) power requirements, which should not exceed 300W.

USBポートの使用

  • Ensure the inverter is turned on.
  • Connect your USB-powered device (e.g., smartphone, tablet) to the USB port using a compatible USB cable.
  • The USB port provides standard 5V DC output for charging.

重要: Some sensitive electronic devices may not operate correctly with a modified sine wave inverter. If your device malfunctions, discontinue use.

5. メンテナンスとケア

  • クリーニング: Disconnect the inverter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • 換気: 適切な空気の流れを確保し、過熱を防ぐために、通気口にほこりやごみが詰まっていないことを定期的に確認してください。
  • ストレージ: 使用していないときは、インバーターを直射日光や湿気を避け、涼しく乾燥した場所に保管してください。
  • ケーブル検査: Periodically inspect the power cable and plug for any signs of damage. Do not use the inverter if the cable or plug is damaged.

6。 トラブルシューティング

If you experience issues with your XUNZEL Power Inverter, refer to the following common problems and solutions:

問題考えられる原因解決
電力出力なし / インバータがオンにならない
  • シガライタープラグが完全に差し込まれていません。
  • Vehicle's 12V socket fuse blown.
  • 車両バッテリーvoltag低すぎます。
  • Inverter's internal fuse blown (rare).
  • プラグがしっかりと差し込まれていることを確認してください。
  • Check and replace the vehicle's fuse if necessary.
  • 車のエンジンを始動してバッテリーを充電します。
  • Contact customer support if the inverter is faulty.
Overload protection activated (inverter shuts down)
  • Connected device's power consumption exceeds 150W.
  • Device has a high startup surge (e.g., motor).
  • Disconnect the device. Reduce the load.
  • Use devices within the 150W continuous rating.
  • インバータを再起動してください。
Device not working correctly with inverter
  • Device requires a pure sine wave inverter.
  • Device is incompatible with modified sine wave output.
  • Check device specifications for power requirements.
  • Some sensitive electronics (e.g., medical equipment, certain laser printers) may require a pure sine wave inverter.

7. 技術仕様

パラメータ価値
モデル番号INLI150RU
入力ボリュームtageDC12V
出力巻tage交流230V
出力周波数50Hz
継続的な電力150W
ピークパワー300W (0.5 seconds)
USB出力5V DC (standard USB)
寸法(長さ×幅×高さ)7 x 19.2 x 7 cm
重さ550グラム
保護オーバーボルtage、Undervoltage, Overload, Short-circuit

8. 保証とサポート

This XUNZEL product is designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact your retailer or the manufacturer directly.

保証請求のために購入証明書を保管してください。

© 2023 XUNZEL. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.