ECHOGEAR EGLF1-BK
ECHOGEAR フルモーション関節式テレビ壁掛けマウント 取扱説明書
Model: EGLF1-BK
導入
This manual provides comprehensive instructions for the safe and efficient installation and operation of your ECHOGEAR Full Motion Articulating TV Wall Mount. Designed for TVs up to 75 inches and weighing up to 132 lbs, this mount offers smooth swivel and tilt capabilities, extending up to 16 inches from the wall. The DIY-friendly 3-step installation process can typically be completed in under 30 minutes. Please read all instructions carefully before beginning installation.
重要な安全情報
警告： Failure to read and follow all instructions can result in personal injury or property damage. Do not install this product if you do not understand these instructions or have doubts about the safety of the installation.
- 取り付け面がマウントおよびテレビの合計重量を安全に支えられることを確認してください。
- This mount is designed for installation into 16-inch wood studs. Do not install into drywall alone.
- Always use a stud finder to accurately locate the center of the studs.
- Use appropriate safety gear, including eye protection, during installation.
- 安全に設置するために、特にテレビを持ち上げる際は 2 人で作業することをお勧めします。
- Do not exceed the maximum weight capacity of 132 lbs (60 kg) or the maximum TV size of 75 inches.
パッケージ内容
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ECHOGEAR customer support.
Image: All components included in the ECHOGEAR Full Motion TV Wall Mount package, neatly laid out. This includes the main mount assembly, TV brackets, various screws, spacers, and an instruction manual.
付属ハードウェア:
The package includes a variety of screws and spacers to ensure compatibility with most TV models. Extra screws are provided to ensure a match with your TV. Refer to the detailed hardware list in the printed manual for specific sizes and quantities.
セットアップとインストール
Follow these three simple steps for a smooth and secure installation.
ステップ 1: テレビブラケットをテレビに取り付ける
Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws and spacers from the provided hardware kit that fit your TV's VESA pattern. Attach the two vertical TV brackets to the back of your TV, ensuring they are securely fastened and level.
画像: クローズアップ view of the two vertical mounting brackets securely attached to the back of a flat-screen television, ready for wall mounting.
Image: A diagram illustrating the various VESA mounting patterns supported by the ECHOGEAR TV mount, indicating its broad compatibility with different television brands and models.
ステップ2：壁プレートを壁に取り付ける
Locate two adjacent wood studs that are 16 inches apart using a reliable stud finder. Mark the desired height for the top of your TV. Position the wall plate of the mount against the wall, aligning the mounting holes with the center of the marked studs. Use a level to ensure the wall plate is perfectly horizontal. Drill pilot holes and securely fasten the wall plate to the studs using the provided lag bolts. Ensure all bolts are tightened firmly. This mount is designed for 16-inch wood studs. If you have 24-inch studs, please refer to the EGLF2 model.
Image: The main wall plate component of the ECHOGEAR TV mount, showing its robust construction and multiple mounting points for attachment to wall studs.
画像: 副業file of the TV mount, illustrating its ability to extend the television up to 16 inches from the wall, providing ample space for cable management and articulation.
ステップ3：壁プレートにテレビを掛ける
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Use the safety screws or locking mechanisms on the TV brackets to prevent accidental dislodging. Once mounted, you can adjust the TV's position for optimal viewing。
Image: A person is shown in the process of lifting and attaching a television onto the pre-installed ECHOGEAR wall mount, demonstrating the final step of the installation.
テレビマウントの操作
Your ECHOGEAR Full Motion TV Mount allows for flexible positioning of your television to achieve the best viewing angle from anywhere in the room.
- スイベル: Gently push or pull the TV to swivel it left or right. The mount allows for up to 130 degrees of swivel, depending on TV size and wall clearance.
- Loosen the tilt adjustment knobs on the TV brackets, adjust the TV to your desired vertical angle (up to 5 degrees up and 15 degrees down), and then tighten the knobs to secure the position.
- 拡大： Pull the TV straight out from the wall to extend it up to 16 inches. Push it back towards the wall when not needed.
- レベル調整: After installation, you can make minor rotational adjustments to ensure the TV is perfectly level.
Image: A visual representation of the mount's "Smooth Moves" capabilities, showing arrows indicating the range of swivel (up to 130 degrees) and tilt (5 degrees up, 15 degrees down), along with post-install leveling.
Image: A large flat-screen TV mounted on the wall in a modern living room, showcasing the clean and space-saving aesthetic achieved with the ECHOGEAR wall mount.
メンテナンス
定期的なメンテナンスにより、テレビ マウントの寿命が長くなり、安全に動作することが保証されます。
- 定期点検： すべてのネジとボルトがしっかりと固定されているか定期的に確認してください。
- クリーニング： マウント部分は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は、仕上げを傷める可能性があるため、使用しないでください。
- 潤滑: The articulating arms are designed for smooth movement and generally do not require lubrication. If movement becomes stiff, contact customer support.
トラブルシューティング
インストール中またはインストール後に問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 設置後、テレビが水平ではありません。 | Minor rotational misalignment. | Use the post-installation leveling feature to adjust the TV's horizontal alignment. |
| 壁に取り付けると緩い感じがします。 | Lag bolts not fully tightened or not properly anchored in studs. | Re-tighten all lag bolts. Ensure they are securely fastened into the center of the wood studs. If necessary, re-drill pilot holes or consult a professional. |
| テレビがスムーズに回転したり傾いたりしません。 | Tilt knobs too tight or mechanism needs adjustment. | Loosen tilt knobs slightly for smoother movement. If issues persist, contact ECHOGEAR support. |
| 不足している部品。 | 梱包エラーです。 | Contact ECHOGEAR customer support immediately for replacement parts. |
If you are unable to resolve an issue using the troubleshooting guide, please contact ECHOGEAR customer support.
製品仕様
- ブランド： エコーギア
- モデル番号: EGLF1-BK
- 取り付けタイプ: 壁掛け
- 移動タイプ: 関節式、回転式、傾斜式
- 材料： ステンレス鋼
- 対応テレビ最大サイズ: 75インチ
- 対応テレビの最小サイズ: 37インチ
- 最大積載量： 132ポンド（60kg）
- 壁からの延長: 最大16インチ
- 回転範囲: 最大130度（テレビのサイズによって異なります）
- 範囲を傾ける： 5度上昇、15度下降
- 適合スタッド間隔: 16 inches (wood studs)
- UL認定: はい
- 商品の重量: 18ポンド
- パッケージ寸法: 17.9 x 12.76 x 3.06インチ
- 国際コード: 793795529725
- 最初に入手可能: 15年2015月XNUMX日
保証情報
ECHOGEAR products are designed for durability and reliability. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official ECHOGEAR website. ECHOGEAR stands behind its products and offers support for any manufacturing defects.
カスタマーサポート
If you have any questions, require assistance with installation, or need to report a missing/damaged part, ECHOGEAR's Minnesota-based product experts are available to help 7 days a week.
連絡先： Please refer to the contact details provided in your product packaging or on the official ECHOGEAR web最新のサポート オプションについては、サイトをご覧ください。
For more information and additional products, visit the ECHOGEAR Store on Amazon.
環境への取り組み
ECHOGEAR is committed to environmental sustainability. For every EGLF1 TV mount sold, ECHOGEAR plants a tree. Over 500,000 trees have been planted so far as part of this initiative.
Image: A graphic illustrating ECHOGEAR's commitment to planting one tree for every EGLF1 TV mount sold, highlighting their environmental initiative.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.