導入
This manual provides detailed instructions for the EMOS E0042 Wireless Digital Thermometer. This device is designed to accurately measure and display both indoor and outdoor temperatures using a main unit and a remote wireless sensor. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
Image showing the EMOS E0042 Wireless Digital Thermometer in its retail packaging.
パッケージ内容
The EMOS E0042 package includes the following components:
- 1x EMOS E0042 Main Display Unit
- 1x EMOS Wireless Outdoor Sensor
Image showing the EMOS E0042 main display unit and the wireless outdoor sensor.
製品の特徴
The EMOS E0042 Wireless Digital Thermometer offers a range of features for convenient temperature monitoring:
- Clear and easy-to-read LCD display with large digits.
- Simultaneous display of indoor and outdoor temperatures.
- Wireless outdoor sensor with a transmission range of up to 100 meters (open area).
- Temperature measurement range: Indoor 0 °C to 60 °C, Outdoor -40 °C to +60 °C.
- Temperature resolution: 0.1 °C.
- Main unit suitable for tabletop placement or wall mounting.
- Sensor designed for outdoor use.
- Powered by AAA batteries (not included).
Icon indicating indoor and outdoor temperature measurement capabilities.
設定
1. バッテリーの取り付け
The main unit and the wireless sensor each require 2x AAA 1.5V batteries (not included).
メインディスプレイユニット:
- Locate the battery compartment on the back of the main display unit.
- 電池ボックスのカバーを開きます。
- 正しい極性 (+/-) を確認して、単 4 電池 2 本を挿入します。
- 電池カバーをしっかりと閉じてください。
後方 view of the EMOS E0042 main display unit, showing the battery compartment and wall-mount hole.
ワイヤレス屋外センサー：
- Locate the battery compartment on the back of the wireless outdoor sensor.
- 電池ボックスのカバーを開きます。
- 正しい極性 (+/-) を確認して、単 4 電池 2 本を挿入します。
- 電池カバーをしっかりと閉じてください。
- The sensor will automatically begin transmitting data.
後方 view of the EMOS wireless outdoor sensor, showing the battery compartment.
2. センサーのペアリング
The main unit and sensor should automatically pair once batteries are installed. If the outdoor temperature is not displayed, ensure both units are within range and try re-inserting the batteries in both units.
3.配置
メインディスプレイユニット:
Place the main unit indoors on a flat surface using its integrated stand, or mount it on a wall using the hanging hole on the back. Ensure it is in a location where the display is easily visible and not exposed to direct sunlight or extreme temperature fluctuations.
側 view of the EMOS E0042 main display unit, showing its integrated stand for tabletop placement.
ワイヤレス屋外センサー：
Position the wireless sensor outdoors in a shaded area, protected from direct rain and sunlight, to ensure accurate temperature readings. The maximum effective range between the sensor and the main unit is 100 meters in an open area. Walls, obstacles, and electronic interference can reduce this range.
操作手順
温度の読み方
Once powered on and paired, the main display unit will show two temperature readings:
- 外： This indicates the outdoor temperature measured by the wireless sensor.
- で： This indicates the indoor temperature measured by the main display unit itself.
The temperature is displayed in degrees Celsius (°C).
画面
The large LCD screen provides clear, simultaneous readings of both indoor and outdoor temperatures.
メンテナンス
クリーニング
デバイスを清掃するには、柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤や溶剤はディスプレイやコンピューターを損傷する恐れがあるため使用しないでください。asing.
バッテリー交換
When the display becomes dim or readings are inconsistent, it is time to replace the batteries in both the main unit and the wireless sensor. Follow the battery installation steps outlined in the "Setup" section.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 本体に何も表示されません。 | 電池が切れているか、正しく挿入されていません。 | 電池の極性を確認し、新しい AAA 電池と交換してください。 |
| Outdoor temperature not displayed or shows "--". | Sensor out of range, batteries dead, or interference. | Move sensor closer to the main unit. Replace sensor batteries. Ensure no strong electronic interference sources are nearby. Re-pair by removing and re-inserting batteries in both units. |
| 温度の測定値が不正確です。 | センサーが直射日光、雨、または熱源にさらされています。 | Relocate the sensor to a shaded, protected area. Ensure proper ventilation around both units. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | E0042 |
| ブランド | エモス |
| 室内温度範囲 | 0℃～60℃ |
| 屋外の温度範囲 | -40℃～+60℃ |
| 温度分解能 | 0.1℃ |
| ワイヤレス範囲 | 最大100メートル（オープンエリア） |
| 頻度 | 433 MHz |
| 本体電源 | 2x AAA 1.5Vバッテリー（含まれていません） |
| センサー電源 | 2x AAA 1.5Vバッテリー（含まれていません） |
| 本体寸法（長さ×幅×高さ） | 8.5 x 5.6 x 1.8 cm |
| センサーの寸法 (長さ x 幅 x 高さ) | 6.8 x 4.9 x 2.0 cm |
| 表示タイプ | デジタルLCD |
| 接続技術 | RF（無線周波数） |
| 材料 | プラスチック |
| 認定資格 | CE |
安全情報
For detailed safety guidelines and important warnings, please refer to the official Safety Information PDF document provided by the manufacturer. 安全情報（PDF）をダウンロード
保証とサポート
EMOS products are manufactured to high-quality standards. For warranty information or technical support, please contact your retailer or the official EMOS customer service. Keep your purchase receipt as proof of purchase.