導入
This manual provides comprehensive instructions for the installation, operation, and maintenance of your RGBZONE Mini 24-Key IR Wireless RGB LED Controller. This controller is designed for use with SMD 3528, 5050, and 5630 RGB LED light strips, offering 16 color options and 4 dynamic light patterns. Please read this manual thoroughly before use to ensure proper functionality and safety.
Image: The RGBZONE Mini 24-Key IR Wireless RGB LED Controller and its accompanying 24-key remote control.
パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- 1 x IR LED Controller
- 1 x 24 Key IR Remote Control
- ユーザーマニュアル x 1
仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | RGBゾーン |
| モデル | FB5129AUSWHO1 |
| コントローラータイプ | 赤外線リモコン |
| 入力ボリュームtage | DC 5V-24V |
| 出力電流 | 3x2A (6A total) |
| 最大出力電流（12V） | 12A |
| 最大ワットtage（24V） | 144ワット |
| Compatible LED Strips | SMD 5050, 3528, 2835 RGB (4-Pin connectors) |
| リモコン距離 | 16-26ft (5-8M) |
| リモートバッテリ | CR2025（付属） |
| 材料 | プラスチック |
| 屋内/屋外での使用 | 屋内使用のみ |
セットアップ手順
Follow these steps to connect your RGB LED controller:
- LED ストリップを接続します。 Locate the 4-pin connector on your RGB LED strip. Align the pins with the 4-pin output connector on the IR LED controller. Ensure the arrow on the controller connector aligns with the arrow on the LED strip connector.
- 電源の接続： Connect your DC 5V-24V power supply to the DC input jack on the IR LED controller. The controller supports input voltag5Vから24Vまで。
- IR レシーバーの位置: Ensure the infrared signal receiver (small black component on a wire) is positioned in a location where it has a clear line of sight to the remote control. Obstructions will interfere with signal reception.
Image: Connection diagram illustrating how to connect the IR LED controller to an LED strip and a power supply. The diagram highlights the IR receiver and the importance of aligning arrows on connectors.
Image: A detailed diagram showing the connections between the remote controller, power supply, IR reception, and LED strip. It emphasizes that LED strips and power supplies are not included.
重要な注意:
- This controller is for RGB (4-pin) LED strips only. It is not compatible with RGBW (5-pin) strips.
- 入力ボリュームを確認するtage of your power supply matches the requirements of your LED strip and is within the controller's 5V-24V range.
- Before first use, remove the plastic insulation tab from the remote control's battery compartment.
操作手順
Use the 24-key IR remote control to operate your LED strips. Point the remote directly at the IR signal receiver on the controller for optimal performance.
Image: A visual guide to the 24-key IR remote control, detailing the function of each button, including power, brightness adjustment, 16 color selections, and 4 mode buttons (Flash, Strobe, Fade, Smooth).
リモートコントロール機能:
- オン/オフ: Turns the LED strip on or off.
- 明るさ+/-: Adjusts the brightness level of the selected color or mode.
- R、G、B、W: Direct selection for Red, Green, Blue, and White colors.
- 12 Color Buttons: Selects various preset static colors.
- 閃光： Activates a rapid flashing effect.
- ストロボ： Activates a slow flashing effect.
- フェード： Cycles through colors with a smooth transition.
- スムーズ： Cycles through colors with a gradual, continuous change.
Image: Illustration demonstrating the remote control's effective range of 16-26 feet (5-8 meters) and the requirement to point the remote directly at the IR sensor without obstructions.
メンテナンス
リモートコントロールバッテリーの交換：
The remote control uses a CR2025 3V lithium coin cell battery. To replace the battery:
- Locate the battery tray on the side or back of the remote.
- Push the small tab or lever to release the tray.
- Slide the old CR2025 battery out.
- 新しい CR2025 電池をプラス (+) 側を上に向けて挿入します。
- 電池トレイを、カチッと音がするまでリモコンに戻します。
Image: Step-by-step visual guide on how to remove the CR2025 battery from the remote control, showing to push inwards then outwards.
クリーニング：
Wipe the controller and remote with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
トラブルシューティング
- LED strip does not light up:
- すべての接続をチェックして、安全であることを確認します。
- 電源が機能し、正しい電圧を供給していることを確認します。tage (5V-24V)。
- Ensure the arrow on the controller's output connector aligns with the arrow on the LED strip's input.
- LED ストリップ自体が機能していることを確認します。
- リモコンが動作しません:
- Ensure the plastic insulation tab has been removed from the battery compartment.
- CR2025 電池が消耗している場合は交換してください。
- Point the remote directly at the IR signal receiver on the controller.
- Remove any obstructions between the remote and the receiver.
- Colors are incorrect or mixed:
- This controller is designed for standard RGB wiring. If your LED strip has a different wiring order (e.g., GRB, BRG), the colors may not match the remote buttons. There is no setting on this controller to change the output order.
Image: A diagram showing different RGB wiring configurations and indicating which one is compatible with the controller for correct color display.
安全情報
- This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- 電源のボリュームを確認してくださいtage is compatible with both the controller and the LED strip.
- Do not exceed the maximum output current (6A) or wattage (144W at 24V) of the controller.
- お子様の手の届かない場所に保管してください。
- Do not attempt to disassemble or modify the controller or remote control.
保証とサポート
For warranty information or technical support, please refer to the product packaging or contact RGBZONE customer service through their official channels. You can visit the RGBZONE Store 詳細な製品情報については。