Alpine CDE-151

Alpine CDE-151 CD/MP3/WMA Receiver User Manual

Model: CDE-151

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine CDE-151 CD/MP3/WMA Receiver. Please read this manual thoroughly before using the unit to ensure proper operation and to prevent damage.

2. 安全情報

  • 電源: このユニットは12V DCマイナス接地電気システム用に設計されています。適切な電圧を供給してください。tag損傷を防ぐためです。
  • 配線: Connect all wires correctly and securely. Incorrect wiring can cause fire or malfunction. Refer to the wiring diagram carefully.
  • 設置場所: 運転者の視界を妨げない場所に設置してください。 view or interfere with vehicle operation. Avoid locations exposed to direct sunlight, extreme heat, or moisture.
  • 音量レベル: Do not operate the unit at excessively high volume levels for extended periods, as this may cause hearing damage or distract from driving.
  • 分解: Do not attempt to disassemble or modify the unit. This may result in electric shock, fire, or other accidents. Refer all servicing to qualified personnel.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • Alpine CDE-151 Head Unit
  • ワイヤハーネス
  • Mounting Sleeve and Trim Ring
  • Installation Hardware (screws, removal keys)
  • ユーザーマニュアル(このドキュメント)

4. インストール

4.1配線接続

Before making any connections, disconnect the vehicle's negative battery terminal to prevent short circuits. Refer to the wiring diagram below for proper connections. Each wire is color-coded for identification.

後方 view of Alpine CDE-151 with wiring harness and RCA outputs

Figure 1: Rear Panel and Wiring Connections. This image displays the rear of the Alpine CDE-151 receiver, showing the main wiring harness connector, antenna input, and RCA preamp outputs. The color-coded wires of the harness are visible, indicating connections for power, ground, speakers, and accessory functions. Ensure all connections are secure and insulated.

  • Yellow (Constant Power): 車両の常時12V電源に接続します。
  • Red (Accessory Power): Connect to the vehicle's ignition-switched 12V power supply.
  • 黒地): 車両内の清潔な金属シャーシ ポイントに接続します。
  • Blue/White (Remote Turn-On): 外部のリモート電源投入リード線に接続します amp増幅器またはパワーアンテナ。
  • スピーカーワイヤー: Connect to the corresponding vehicle speaker wires (e.g., White/White-Black for Front Left, Gray/Gray-Black for Front Right, Green/Green-Black for Rear Left, Purple/Purple-Black for Rear Right).
  • RCAプレamp 出力: 外部に接続する amplifiers for front, rear, or subwoofer channels.

4.2 ユニットの取り付け

The CDE-151 is a single-DIN unit. Use the supplied mounting sleeve and hardware to secure the unit in the vehicle's dashboard opening. Ensure the unit is firmly seated and does not vibrate. After mounting, attach the trim ring for a finished appearance.

側 view of Alpine CDE-151 receiver chassis

図2:側面 View of Receiver Chassis. この画像はサイドプロを示していますfile of the Alpine CDE-151 receiver, highlighting the metal chassis with ventilation holes and mounting screw points. This view is useful for understanding the unit's dimensions and how it fits into a standard single-DIN opening.

5. 初期設定

After installation, reconnect the vehicle's negative battery terminal. The unit will power on. Follow these steps for initial setup:

  1. 電源オン: を押す SOURCE/⑂ ユニットの電源を入れるボタン。
  2. 時計の設定: Access the setup menu to set the correct time. Refer to the 'System Settings' section for detailed instructions.
  3. 初期オーディオ設定: Adjust basic audio parameters like Bass, Treble, Balance, and Fader to your preference.

6. 操作手順

This section details the functions of the front panel controls and various playback modes.

Front panel of Alpine CDE-151 CD receiver

図 3: フロント パネルのコントロール。 This image displays the front face of the Alpine CDE-151 receiver, highlighting the main rotary encoder, source button, bass button, band button, and preset buttons. The display shows 'BASS ENGINE', indicating an active audio feature. This view is essential for understanding how to operate the unit.

6.1 基本的な制御

  • Rotary Encoder (Volume Knob): Turn to adjust volume. Press to access audio settings or confirm selections.
  • SOURCE/⑂ Button: Press to switch between input sources (CD, USB, AUX, Tuner). Press and hold to turn the unit off.
  • 低音ボタン: Directly access Bass Engine settings for quick bass adjustments.
  • バンドボタン: In Tuner mode, press to switch between FM1, FM2, FM3, and AM bands.
  • プリセットボタン(1~6): Store and recall radio stations. In CD/USB mode, these may function as direct track selection or folder navigation.
  • 進む/戻るボタン (◀◀/▶▶): Skip tracks/files or seek radio stations.

6.2 CD再生

  1. Insert a CD into the disc slot with the label side up. The unit will automatically load and begin playback.
  2. Use the ◀◀/▶▶ buttons to skip tracks.
  3. Press the Rotary Encoder to pause/play.

6.3 USB再生

  1. Connect a USB storage device to the front USB input.
  2. SOURCE ボタンを押して USB を選択します。
  3. Use the ◀◀/▶▶ buttons to navigate tracks. Use the preset buttons for folder navigation if applicable.
  4. このユニットはMP3とWMAオーディオをサポートしています files.

6.4補助入力

  1. Connect an external audio device (e.g., smartphone, portable music player) to the front 3.5mm auxiliary input jack.
  2. Press the SOURCE button to select AUX.
  3. 接続されたデバイスからの再生を制御します。

6.5 ラジオチューナー

  1. Press the SOURCE button to select Tuner.
  2. Press the BAND button to select FM1, FM2, FM3, or AM.
  3. Use the ◀◀/▶▶ buttons to seek for stations. Press and hold for manual tuning.
  4. To store a preset: Tune to the desired station, then press and hold one of the preset buttons (1-6) until you hear a beep.
  5. To recall a preset: Briefly press the desired preset button (1-6).

6.6 オーディオ設定

The CDE-151 features a 3-Band Equalizer and Bass Engine for sound customization.

  • Accessing Audio Settings: Press the Rotary Encoder to enter the audio menu. Turn the encoder to navigate through options like Bass, Mid, Treble, Balance, Fader, and Subwoofer level (if connected). Press the encoder to select an option and turn to adjust.
  • Bass Engine: Press the BASS button for quick access to bass enhancement features.

7. メンテナンス

  • ユニットのクリーニング: フロントパネルは柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
  • ディスクケア: CDは端を持って扱ってください。清潔に保ち、傷がつかないようにしてください。
  • USBポート: USB ポートにほこりやごみが付かないようにしてください。

8。 トラブルシューティング

問題 解決
電源なし Check power connections (Yellow, Red, Black wires). Ensure vehicle battery is charged. Check vehicle fuses.
音が出ない Check speaker wire connections. Ensure volume is not muted or too low. Verify amplifier remote turn-on (Blue/White wire) if using external amps.
CD/USBが再生されない Ensure disc is inserted correctly and is not scratched/dirty. For USB, ensure device is formatted correctly (FAT16/32) and contains supported file types (MP3/WMA).
ラジオの受信状態が悪い アンテナの接続を確認してください。アンテナが完全に伸びていることを確認してください(該当する場合)。受信状態の良い放送局にチューニングしてみてください。

9. 仕様

  • 製品寸法: 9.06 x 3.94 x 10.63インチ
  • 商品の重量: 3.1ポンド
  • 出力: 50 Watts x 4 Channels (Max), 18 Watts x 4 Channels (RMS)
  • チャンネル数: 4
  • 接続技術: 補助、USB
  • 特集: Equalizer (3-Band EQ, Bass Engine)
  • オーディオ出力モード: ステレオ
  • 対応デバイス: スマートフォン、スピーカー
  • メーカー: 高山

10. 保証とサポート

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Alpine webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

© 2023 アルパイン電子。無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.