1.製品オーバーview
The Bixolon SRP-350PLUSIIICOSG is a high-performance thermal receipt printer designed for various point-of-sale (POS) environments. It offers reliable and fast printing at 180dpi resolution, with versatile connectivity options including LAN, USB, and RS232. This manual provides essential information for setting up, operating, and maintaining your printer.
Figure 1: Bixolon SRP-350PLUSIIICOSG Thermal Receipt Printer (Dark Grey)
2. セットアップ
2.1 開梱と初期セットアップ
Carefully remove the printer and all accessories from the packaging. Ensure all components, including the power supply unit (PSU), power cord, and a paper roll, are present.
2.2用紙のセット
- Open the printer cover by pushing the lever on the side.
- 感熱紙ロールをコンパートメントに挿入し、用紙が下から給紙され、先端がまっすぐになっていることを確認します。
- カッターを越えて少量の紙を引き出します。
- プリンターのカバーをカチッと音がするまでしっかりと閉じます。
Video 1: Demonstrates the process of loading paper into a thermal receipt printer, including opening the cover, inserting the paper roll, and closing the cover.
2.3プリンターの接続
Connect the power cord to the printer and a power outlet. Connect the printer to your computer or network using the appropriate cable (USB, LAN, or RS232) based on your setup requirements.
Video 2: Provides instructions on how to set up the printer via an Ethernet port and general installation steps.
2.4 ドライバのインストール
Install the printer drivers from the provided CD or download them from the Bixolon support website. Follow the on-screen instructions to complete the installation. For network connections, ensure the printer's IP address is correctly configured.
Video 3: Demonstrates the driver installation process for the EOM-200 printer, which is similar for many thermal receipt printers.
3. 操作手順
3.1 テストページの印刷
After driver installation, it is recommended to print a test page to confirm proper setup. This can usually be done through your operating system's printer settings (e.g., Control Panel > Devices and Printers on Windows).
3.2 フィードボタンの使用
の 餌 button on the printer allows you to manually advance the paper. Press it once to feed a small amount of paper, or press and hold to continuously feed paper.
4. メンテナンス
4.1一般的なクリーニング
- 定期的にプリンタの外側を柔らかくて清潔な布で拭いてください。amp 布。
- Use a soft brush or compressed air to remove dust and paper debris from the paper path and print head area.
- For optimal print quality, clean the thermal print head with an alcohol-based cleaning pen or swab.
4.2 紙の交換
Replace the paper roll as described in Section 2.2 when the paper low sensor indicates a need for a new roll or when the print quality deteriorates.
5。 トラブルシューティング
5.1 よくある問題
- プリンターが応答しません: Check power connections, data cables, and ensure the printer is turned on. Verify driver installation and port settings.
- 印刷品質が悪い: Ensure you are using thermal paper. Clean the print head and check for any obstructions in the paper path.
- 紙詰まり: Open the printer cover, carefully remove any jammed paper, and ensure the new paper roll is loaded correctly.
- エラーライト: Refer to the printer's LED indicators for specific error codes or patterns. Consult the full product manual for detailed explanations.
6. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ビクソロン |
| モデル名 | SRP-350PLUSIIICOSG |
| 巻tage | 120ボルト |
| アイテム重量 | 1560 グラム (3.44 ポンド) |
| ワットtage | 60.00 |
| 製品寸法 | 5.71 x 5.75 x 7.87インチ |
| 解決 | 180dpi |
| 接続性 | LAN, USB, RS232 |
7. 保証とサポート
7.1 保証情報
This Bixolon printer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including coverage duration and claim procedures. Keep your proof of purchase for warranty validation.
7.2 テクニカルサポート
For technical assistance, troubleshooting, or service inquiries, please contact Bixolon customer support. You can find contact details on the official Bixolon website or in your product documentation. When contacting support, please have your printer model and serial number ready.