Klipsch R-110SW サブウーファー 取扱説明書

導入

The Klipsch R-110SW Subwoofer is designed to deliver powerful, clean, and deep bass, enhancing your home audio entertainment experience. This manual provides essential information for setting up, operating, and maintaining your subwoofer to ensure optimal performance and longevity.

箱の中身

Upon unpacking your Klipsch R-110SW Subwoofer, please ensure all items are present:

• Klipsch R-110SW Subwoofer Unit
• 電源コード
• グリル（プリインストールまたは別売）

画像: 正面 view of the Klipsch R-110SW Subwoofer with its protective grille installed.

主な特徴

The Klipsch R-110SW Subwoofer incorporates advanced technology for superior bass performance:

• 10" Spun-Copper Cerametallic Woofer: Provides exceptional low-frequency response with minimal cone breakup.
• オールデジタル Amplifier： Delivers 450 watts of dynamic power for robust and accurate bass.
• Front-Firing Slot Port: Features exclusive internal flare technology for reduced port noise and enhanced bass extension.
• L/R Line-Level/LFE RCA Inputs: Ensures compatibility with a wide range of receivers and home theater systems.
• Optional Klipsch WA-2 Wireless Subwoofer Kit: Allows for simple wireless connection (kit sold separately).

画像: 正面 view of the Klipsch R-110SW Subwoofer with the grille removed, showcasing the spun-copper Cerametallic woofer.

設定

サブウーファーのパフォーマンスを最適化するには、適切な配置と接続が重要です。

配置

Subwoofer placement can significantly impact bass quality. Experiment with different locations in your room. Generally, placing the subwoofer in a corner can increase bass output, while placing it along a wall can provide a more balanced sound. Avoid placing it directly against a wall if possible, to prevent excessive boominess.

接続

1. 電源接続: Connect the provided power cord to the AC input on the rear of the subwoofer and then to a wall outlet.
2. Audio Connection (LFE Input): For most home theater receivers, connect a single RCA cable from the receiver's LFE output to the LFE input on the subwoofer.
3. Audio Connection (Stereo RCA Inputs): If your receiver does not have an LFE output, connect stereo RCA cables from your receiver's pre-out (subwoofer or stereo) to the L/R LINE IN inputs on the subwoofer.
4. ワイヤレス接続（オプション）: If using the Klipsch WA-2 Wireless Subwoofer Kit, follow the instructions provided with the kit for installation and pairing.

Image: Rear panel of the Klipsch R-110SW Subwoofer, showing the power input, LFE/Line-in RCA inputs, and control knobs for gain, low-pass filter, and phase.

オペレーティング

Once connected, adjust the subwoofer settings for optimal sound integration with your main speakers.

電源オン/オフ

The subwoofer features an auto-standby mode. When set to 'AUTO', the subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity. You can also manually set it to 'ON' for continuous operation or 'OFF' to power down completely.

コントロール

• ゲイン（ボリューム）: Adjust this knob to match the subwoofer's output level with your main speakers. Start with a low setting and gradually increase until the bass blends seamlessly with your system.
• LOW-PASS FILTER (Crossover): This control determines the highest frequency the subwoofer will reproduce. Set it to a point slightly above the lowest frequency your main speakers can reproduce. A common starting point is 80Hz. If using a receiver with LFE output, this setting is often bypassed, and the receiver manages the crossover.
• 位相（0°/180°）: This switch helps to acoustically match the subwoofer's output to your main speakers. Experiment with both settings to find the one that provides the most impactful and cohesive bass.

メンテナンス

To keep your Klipsch R-110SW Subwoofer in excellent condition:

• クリーニング： Use a dry, soft cloth to clean the cabinet. Avoid abrasive cleaners or solvents.
• グリルのお手入れ: The grille protects the woofer. If removed, store it safely to prevent damage.
• 環境： Ensure the subwoofer is placed in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.

トラブルシューティング

If you encounter issues with your subwoofer, refer to the following common solutions:

• 音が出ない:
  • Check power connections and ensure the subwoofer is plugged into a live outlet.
  • Verify the power switch is in the 'ON' or 'AUTO' position.
  • Ensure audio cables are securely connected to both the subwoofer and your receiver.
  • Confirm your receiver's subwoofer output is enabled and volume is not muted.
• 歪んだ音やブーミーな音:
  • Reduce the GAIN (volume) control on the subwoofer.
  • Adjust the LOW-PASS FILTER (crossover) to a lower frequency.
  • Experiment with the PHASE switch (0° or 180°).
  • サブウーファーを部屋の中で位置を変えてみてください。
• Subwoofer Not Turning On Automatically:
  • Ensure the power switch is set to 'AUTO'.
  • Increase the GAIN control on the subwoofer or the subwoofer output level on your receiver to ensure a strong enough signal for auto-detection.

仕様

Image: Diagram showing the dimensions of the Klipsch R-110SW Subwoofer.

保証とサポート

For detailed warranty information and customer support, please refer to the official Klipsch web公式サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。