1. はじめに
Thank you for choosing the TecTake 401163 Tilting TV Wall Mount. This manual provides essential information for the safe and correct installation and use of your new wall mount. Please read these instructions carefully before beginning installation and retain them for future reference.
2. 安全情報
- Ensure the wall structure can safely support the combined weight of the mount and the display. Consult a professional if unsure.
- 最大耐荷重 100 kg (220 ポンド) を超えないようにしてください。
- Always use appropriate safety gear, including eye protection, during installation.
- 設置中は作業エリアに子供やペットを近づけないでください。
- Verify that no electrical wires or plumbing are present in the drilling area.
- すべてのネジをしっかりと締めますが、ネジ山が潰れたりコンポーネントが損傷したりしないように、締めすぎないようにしてください。
- この製品は屋内専用に設計されています。
3. パッケージ内容
Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact TecTake customer support.
- TecTake 401163 TV Wall Mount (pre-assembled)
- Complete Mounting Hardware Kit (screws, anchors, washers, spirit level)
- Detailed and Illustrated Assembly Instructions (this manual)
図3.1: 付属の取り付け金具
4. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | 401163 |
| VESA互換性 | 50x50 mmから400x400 mm |
| 画面サイズの互換性 | 32インチ - 55インチ (81 cm - 140 cm) |
| 最大積載量 | 100 kg (220 ポンド) |
| 壁からの距離 | 2.7 cm (Ultra-flat design) |
| 材料 | 合金鋼 |
| 製品重量 | 約1.1kg（2.4ポンド） |
| 移動タイプ | Fixed (with tilt adjustment) |
図4.1: 技術的寸法
5. セットアップとインストール
Follow these steps for a secure installation. It is recommended to have two people for installation, especially when mounting the display.
- テレビを準備します。 Attach the pre-assembled mount brackets to the back of your television using the appropriate screws from the mounting hardware kit. Ensure the VESA holes on your TV match the mount's compatibility (50x50mm to 400x400mm). Make sure no connectors on the TV are covered by the mount.
- 壁の掘削ポイントをマークする: Hold the wall plate of the mount against the desired position on your wall. Use a pencil to mark the drilling points through the holes on the wall plate. Use the included spirit level to ensure the marks are perfectly horizontal.
- ドリル穴: Drill holes at the marked points on the wall. The drill bit size will depend on the type of wall and the anchors you are using. Insert the appropriate wall anchors into the drilled holes.
- 壁プレートの取り付け: Securely screw the wall plate to the wall using the appropriate screws and washers from the hardware kit. Ensure it is firmly attached and level.
- テレビを掛ける: Carefully lift the television (with the attached brackets) and hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall mount.
- テレビを固定する: Use the safety screws or locking mechanisms (if present on your specific model) to secure the TV to the wall mount, preventing accidental dislodgement.
Figure 5.1: Assembled Wall Mount
図5.2：側面 View of Wall Mount
6.運用
This wall mount features a fixed design with a tilting capability. Once the TV is mounted, you can adjust the tilt angle to achieve the optimal viewing experience. The tilt mechanism allows for a slight downward angle, which can help reduce glare from overhead lighting.
- 傾きの調整: Gently push or pull the bottom of the TV to adjust the tilt angle. The mount is designed for smooth, continuous adjustment within its specified range.
7. メンテナンス
定期的なメンテナンスにより、壁掛け金具の寿命と安全性が確保されます。
- クリーニング： マウント部分は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- 定期点検: すべてのネジと接続部がしっかりと固定されているか、定期的に点検してください。時間の経過とともに、振動や動きによってネジが緩むことがあります。
- 損傷検査： Inspect the mount for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.
8。 トラブルシューティング
If you encounter issues during or after installation, refer to these common solutions.
- テレビが水平でない: Ensure the wall plate is perfectly level before drilling. If the TV is already mounted, you may need to slightly adjust the wall plate or use shims if minor adjustments are needed. Re-check all connections.
- マウントが緩んでいるように感じる: Re-tighten all screws securing the wall plate to the wall and the brackets to the TV. Ensure you are using appropriate anchors for your wall type.
- 傾きの難しさ: Check for any obstructions behind the TV. Ensure the tilt mechanism is not overtightened (if applicable) or damaged.
- 不足している部品: Refer to the 'Package Contents' section. If parts are missing, contact TecTake customer support immediately.
9. 保証とサポート
TecTake products are designed for quality and durability. For information regarding warranty coverage and customer support, please refer to your purchase documentation or visit the official TecTake webサイト。
返品規則： この製品は通常、小売業者の返品ポリシーに従い、購入後 30 日以内に返金または交換を受けることができます。
For further assistance, please contact TecTake customer service.