BLACK+DECKER GH900 6.5-Amp 14-Inch String Trimmer Instruction Manual

重要な安全情報

本製品を操作する前に、すべての安全に関する警告と指示をよく読んで理解してください。警告と指示に従わない場合、感電、火災、または重傷を負う可能性があります。

• Do not touch the cutting tool while it is in operation.
• Keep hands and body away from the cutting path.
• Unplug the device when not in use or during assembly/disassembly.
• Do not use in wet or rainy conditions.
• Keep children and pets away from the area while operating the trimmer.
• Always wear appropriate personal protective equipment, including eye protection, long pants, and sturdy footwear.

製品終了view

The BLACK+DECKER GH900 is a 6.5-Amp corded electric string trimmer designed for efficient lawn maintenance, including trimming grass, cutting weeds, and edging garden beds. It features a 2-in-1 design for easy conversion between trimming and edging modes, an Automatic Feed Spool (AFS), and a cord retention system.

図1: 前面 view of the BLACK+DECKER GH900 6.5-Amp 14-Inch String Trimmer.

組み立て手順

The BLACK+DECKER GH900 string trimmer requires minimal assembly. Follow these steps to prepare your tool for use:

1. Attach the Lower Guard: Secure the lower guard to the trimmer head using the provided screw. Ensure it is firmly attached to protect against debris.
   

   図 2: 拡大図 view of the trimmer head, showing the cutting line and protective guard.
2. 補助ハンドルを取り付けます。 Snap the auxiliary handle into its designated position on the main shaft. This handle provides additional control and comfort during operation.
   

   Figure 3: The trimmer with the auxiliary handle attached, ready for adjustment.

3. ハンドルの高さを調整します: The trimmer features an adjustable height shaft. Rotate the collar on the shaft to loosen, extend or retract the shaft to a comfortable operating height, then tighten the collar to secure.
   

   Figure 4: Detail of the adjustable shaft mechanism, allowing users to customize the trimmer's length for ergonomic use.

4. Verify Trimmer Line: The trimmer line is pre-installed. Ensure it is properly seated in the Automatic Feed Spool (AFS) system.

操作手順

Before operating, ensure all safety precautions are followed and the trimmer is properly assembled.

電源を接続する

• Connect the trimmer's power cord to a suitable extension cord. Ensure the extension cord is rated for outdoor use and has the correct gauge for the length required.
• Utilize the cord retention system to prevent accidental disconnection during use.
• Plug the extension cord into a grounded 110-volt (US standard) electrical outlet.

トリミングモード

To trim grass and weeds:

1. バランスのとれた姿勢を保ちながら、トリマーを両手でしっかりと持ちます。
2. Press the trigger to start the motor.
3. Swing the trimmer in a side-to-side motion, keeping the cutting head parallel to the ground.
4. Avoid contact with hard objects, fences, or delicate plants.
5. The Automatic Feed Spool (AFS) will automatically feed new line as needed, eliminating the need for manual bumping.

Figure 5: A user operating the trimmer in trimming mode, clearing grass along a fence line.

Edging Mode

To convert the trimmer to an edger and create clean lines along sidewalks and driveways:

1. Ensure the trimmer is unplugged before converting modes.
2. Rotate the trimmer head 180 degrees until it locks into the edging position. The wheeled edge guide should be on the ground.
3. Plug the trimmer back in.
4. Place the wheeled edge guide on the hard surface (e.g., sidewalk, driveway) and walk along the edge, allowing the wheel to guide the cutting line.
5. Maintain a steady pace for a consistent edge.

Figure 6: Detail of the trimmer's wheeled edge guide in operation, creating a clean line along a concrete path.

Figure 7: A user demonstrating the trimmer in edging mode along a sidewalk.

メンテナンス

Regular maintenance ensures optimal performance and extends the life of your BLACK+DECKER GH900 trimmer.

クリーニング

• 清掃する前に必ずトリマーのプラグを抜いてください。
• トリマーの外側を洗剤で拭きますamp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
• Remove any accumulated grass, dirt, or debris from the cutting head and guard. A small brush can be used for this purpose.
• 過熱を防ぐために、通気口に障害物がないことを確認してください。

Replacing Trimmer Line (Spool)

When the trimmer line runs out or becomes damaged, replace the spool with a genuine BLACK+DECKER AF-100 replacement spool.

1. Unplug the trimmer from the power source.
2. Press the tabs on the spool cap and remove it.
3. 空のスプールを取り外します。
4. Place the new AF-100 spool onto the spindle, ensuring the line is threaded through the eyelet in the spool cap.
5. Snap the spool cap back into place, ensuring it is securely fastened.

トラブルシューティング

一般的な問題とその解決策については、このセクションを参照してください。

仕様

保証とサポート

This BLACK+DECKER GH900 string trimmer comes with a 2年間のメーカー限定保証.

For warranty claims, technical support, or to purchase replacement parts, please contact BLACK+DECKER customer service or visit their official webサイト。

詳しい情報とサポートリソースについては、 AmazonのBLACK+DECKERストア.