マランツ PM8005

マランツ PM8005 インテグレーテッドステレオ Amplifierユーザーマニュアル

モデル: PM8005

導入

This manual provides detailed instructions for the setup, operation, and maintenance of your Marantz PM8005 Integrated Stereo Ampご使用前にこのマニュアルをよくお読みください。 amp正しく安全に操作するために、このマニュアルを保管してください。

設定

1. 開梱と設置

慎重に取り外します amplifier from its packaging. Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight. Ensure there is sufficient space around the unit for proper airflow.

2. スピーカーの接続

The PM8005 supports two pairs of speakers (A and B) and bi-wiring. Connect your speakers to the appropriate terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier is designed for speakers with an impedance of 4-16 ohms.

  • For Speaker A or B only: 4-16 ohms.
  • For Speaker A and B simultaneously: 8-16 ohms.

3. オーディオソースの接続

Connect your audio source components (e.g., CD player, network player, tuner, recorder, turntable) to the corresponding input jacks on the rear panel. Use high-quality RCA cables for optimal audio performance.

  • PHONO入力: Connect your turntable to the PHONO input. Ensure the ground wire from your turntable is connected to the SIGNAL GND terminal on the ampハム音を軽減するリファイア。
  • CD, NETWORK, AUX, TUNER, RECORDER Inputs: Connect other audio devices to these analog RCA inputs.
  • 力 AMP DIRECT IN: This input allows the PM8005 to function as a power amplifier, bypassing its pre-amplifier section. Useful for integration into a home theater system.
  • プリアウト: These outputs allow you to connect an external power ampスピーカーまたはサブウーファー。

4. 電源接続

After all audio connections are made, connect the supplied power cord to the AC IN terminal on the rear panel and then to a suitable wall outlet. The unit operates on 120V AC, 60Hz.

Rear panel of the Marantz PM8005 Integrated Stereo Ampさまざまな入力および出力接続を示す lifier。

画像: Rear panel of the Marantz PM8005 Integrated Stereo Amplifier。 この view displays the various audio input and output connections, including PHONO, CD, NETWORK, AUX, TUNER, RECORDER, PRE OUT, and POWER AMP DIRECT IN. Speaker terminals for A and B are clearly visible, along with the AC IN power input and remote control jacks. The model number PM8005 and power specifications (120V~60Hz, 220W) are also indicated.

操作手順

1. 電源のオン/オフ

フロントパネルの電源ボタンを押して電源を入れます。 amp電源のオン/オフを切り替えます。電源がオンになると、電源インジケーターが点灯します。

2. 入力選択

Use the input selector knob or buttons on the front panel (or remote control) to choose the desired audio source (e.g., CD, PHONO, NETWORK).

3. 音量調整

Rotate the large VOLUME knob on the front panel to adjust the sound level. Start with a low volume and gradually increase it to a comfortable listening level.

4. トーンコントロール

The PM8005 features BASS, MID, and TREBLE tone controls to adjust the sound characteristics to your preference and room acoustics. The "Source Direct" button bypasses these tone controls for the purest audio signal.

5. スピーカーの選択

Use the SPEAKER A/B buttons on the front panel to select which pair of speakers (A, B, or A+B) you wish to use.

メンテナンス

To ensure long-lasting performance and appearance of your Marantz PM8005, follow these maintenance guidelines:

  • クリーニング: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or chemical cloths, as these may damage the finish.
  • 換気: 上部と側面の通気口が amp冷却器が詰まっていないことを確認してください。過熱を防ぐには、適切な空気の流れが不可欠です。
  • ほこり: Periodically dust the unit to prevent dust buildup, which can affect performance and lead to overheating.
  • 接続: Occasionally check all cable connections to ensure they are secure. Loose connections can lead to poor sound quality or intermittent issues.

トラブルシューティング

If you experience issues with your Marantz PM8005, refer to the following common problems and solutions:

問題考えられる原因解決
電源なし電源コードが接続されていない、電源コンセントがアクティブではないEnsure power cord is securely connected. Check the power outlet with another device.
音が出ない入力が正しく選択されていない、スピーカーケーブルが緩んでいる、音量が低すぎる、ミュートがオンになっているSelect the correct input source. Check all speaker cable connections. Increase volume. Deactivate mute function.
歪んだ音Speaker impedance mismatch; damaged cables; source signal too highVerify speaker impedance is within recommended range. Check cables for damage. Reduce source device output level.
ハミング音またはブザー音Ground loop; unshielded cables; nearby electronic interferenceEnsure turntable ground wire is connected. Use shielded cables. Move amp他の電子機器から離して置いてください。

仕様

Detailed technical specifications for the Marantz PM8005 Integrated Stereo Amplifier:

特徴仕様
ブランドマランツ
モデル番号PM8005
Maximum Peak Power per Channel100ワット
全高調波歪み(THD)0.02%
信号対雑音比(SNR)125デシベル
AC入力ボリュームtage120ボルト
AC入力周波数60Hz
消費電力220ワット
440ミリメートル
深さ379ミリメートル
身長128ミリメートル
重さ12000グラム(12 kg)
接続技術イーサネット、HDMI
オーディオ出力モードステレオ
チャンネル数2
対応デバイススピーカー、 Amplifier, Television
特集DSP(デジタル信号処理)

Note: Some specifications, such as HDMI connectivity and surround sound channels, may refer to general product family features or control capabilities rather than direct audio processing for this specific stereo integrated amplifier. The PM8005 is primarily a 2-channel stereo amplifier。

保証情報

Marantz products are manufactured to the highest quality standards. This product is covered by a limited warranty. The specific terms and conditions of the warranty may vary by region and retailer. Please refer to the warranty card included with your product or contact your local Marantz dealer for detailed information regarding warranty coverage, duration, and service procedures.

保証請求の際に必要となるため、購入証明書(領収書)を保管してください。

サポートとお問い合わせ

For further assistance, technical support, or service inquiries regarding your Marantz PM8005 Integrated Stereo Amplifier, please contact Marantz customer support or visit the official Marantz webサイト。

  • オンラインサポート: 訪問 www.marantz.com/en-us/support for FAQs, product registration, and service information.
  • Local Dealer: Your authorized Marantz dealer can provide local support and service.

© 2023 マランツ。無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.