One Control Minimal Series AB Box Instruction Manual

導入

The One Control Minimal Series AB Box is a compact and versatile signal routing device designed for musicians. It allows you to control the direction of your audio signal path, enabling functions such as selecting between amplifiers, muting your signal, or switching between different input sources. Its robust design ensures durability and low noise performance.

製品終了view

The AB Box features one input and two outputs (A and B), along with a footswitch to toggle between the outputs. It also includes a 9-volt power input for LED indicator functionality.

主な特徴:

• コンパクトで耐久性のあるデザイン。
• One input, two outputs (A and B).
• Footswitch for toggling between outputs.
• LED indicators for active output (requires power).
• Can operate passively without power (LEDs will not function).

設定

Connecting as an Output Selector (1 Input to 2 Outputs):

1. 楽器（ギターなど）を 入力 jack on the AB Box.
2. Connect a cable from the 出力A jack to your first destination (e.g., Amplifier A).
3. Connect a cable from the 出力B jack to your second destination (e.g., Amplifier B or a tuner).
4. For LED functionality, connect a 9-volt center negative power supply to the 力 input. The unit will function passively without power, but the LEDs will not illuminate.

Connecting as an Input Selector (2 Inputs to 1 Output):

1. Connect your first instrument to the 出力A jack (used as Input 1 in this configuration).
2. Connect your second instrument to the 出力B jack (used as Input 2 in this configuration).
3. Connect a cable from the 入力 jack (used as Output in this configuration) to your amp信号チェーン内のリファイアまたは次のペダル。
4. For LED functionality, connect a 9-volt center negative power supply to the 力 input. The unit will function passively without power, but the LEDs will not illuminate.

操作手順

Toggling Outputs/Inputs:

Once connected, press the footswitch to toggle between the active output (A or B) or active input (A or B). If a power supply is connected, the red and blue LEDs will indicate which path is currently active.

Mute/Tuner Switch Functionality:

To use the AB Box as a mute or tuner switch, connect your main signal path to one output (e.g., Output A) and your tuner to the other output (e.g., Output B). When you switch to Output B, your main signal will be muted, allowing you to tune silently. Even without a tuner connected, switching to an unused output will mute your signal.

メンテナンス

• 本体を清潔に保ち、ほこりやゴミを取り除いてください。清掃には柔らかく乾いた布をご使用ください。
• 極端な温度、湿度、直射日光にさらさないでください。
• Do not attempt to open the enclosure or modify the internal circuitry, as this may void the warranty and cause damage.
• 信号の損失や断続的な動作を防ぐために、すべてのケーブルがしっかりと接続されていることを確認してください。

トラブルシューティング

音が出ない:

• Check all cable connections to ensure they are secure and correctly plugged into the designated input/output jacks.
• Verify that the footswitch is set to the desired active output/input.
• Test cables and other equipment in your signal chain to rule out external issues.

LEDが点灯しない:

• Ensure a 9-volt center negative power supply is connected to the POWER input.
• Check that the power supply is functioning correctly and providing the specified voltage.
• The unit can operate passively without power, but the LEDs will not light up. This is normal behavior.

不要なノイズ/ハム音:

• 接続されているすべての機器が適切に接地されていることを確認してください。
• 高品質のシールド付き計測器ケーブルを使用してください。
• If using two amplifiers, ground loop issues may occur. Consider using a ground loop isolator if necessary.

仕様

保証とサポート

For warranty information and technical support, please refer to the official One Control web詳しくはウェブサイトをご覧いただくか、正規販売店にお問い合わせください。具体的な保証条件は地域や販売店によって異なる場合があります。