Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

1. はじめに

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. 安全情報

バイクの整備作業を行う際は、常に安全を最優先にしてください。これらの安全ガイドラインに従わない場合、怪我をしたり、製品やバイクに損傷を与える可能性があります。

• Ensure the motorcycle is stable and on a level surface before starting installation.
• 手袋や目の保護具など、適切な個人用保護具を着用してください。
• Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
• Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
• 取り付けプロセスのいずれかのステップで不明な点がある場合は、資格のあるオートバイ整備士に相談してください。

3. パッケージ内容

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

• 1x Puig 6789W Traffic Windscreen (Transparent)
• 取り付けハードウェアキット（ブラケット、ボルト、ワッシャー、ナット）×1
• 取扱説明書 (本書) x 1

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. セットアップとインストール

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1.必要なツール

• 六角レンチセット
• レンチセット
• Screwdriver (Phillips or flathead, as required)
• 清掃用の柔らかい布

4.2. インストール手順

1. バイクを準備する: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
2. 取り付けポイントを特定する: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
3. ブラケットを組み立てる: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
4. Attach to Motorcycle: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
5. 位置を調整: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
6. 最終締め付け: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5.運用

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. メンテナンス

Proper maintenance will extend the life and clarity of your windscreen.

• クリーニング： Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
• 検査： Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
• ストレージ： If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7。 トラブルシューティング

このセクションでは、発生する可能性のある一般的な問題について説明します。

8. 仕様

9. 保証とサポート

Puig products are manufactured to high standards. For information regarding warranty coverage, claims, or technical support, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

メーカー: プイグ

Webサイト： www.puig.tv