導入
This manual provides essential information for the proper installation, operation, and maintenance of your Massive Audio HIPPOXL122 12-inch car audio subwoofer. Please read these instructions carefully before use to ensure optimal performance and longevity of your product. Retain this manual for future reference.
製品の特徴
- Heavy Duty, Rugged Industrial Textured Cast Aluminum Basket
- 350oz High Energy Double Stack Strontium Magnet Structure
- Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
- Kevlar Fiber Reinforced Non-Pressed Paper Cone with Industrial Textured Finish
- Red Stitched Edge to the Cone’s Edge for Added Strength
- Over Sized Mirror Image Dual Poly / Nomex Spiders
- Black Anodized One Piece Pole-Plate for Added Motor Force
- Heavy Duty Direct Input Wires Connection to Voice Coils
- Reinforced Fiberglass Woven Dust cap for High Power Applications
- Custom Tooled Rubber Gasket and Magnet Boot
セットアップとインストール
Proper installation is crucial for the performance and safety of your subwoofer. It is highly recommended that installation be performed by a qualified car audio professional.
エンクロージャの推奨事項
The HIPPOXL122 subwoofer requires a suitable enclosure for optimal sound reproduction. Consult with a car audio specialist for custom enclosure designs that match your vehicle and listening preferences. Ensure the enclosure is robust and properly sealed to prevent air leaks.
配線
The subwoofer features dual 2 Ohm voice coils, allowing for flexible wiring configurations (e.g., 1 Ohm or 4 Ohm when wired in parallel or series, respectively). Always match the subwoofer's impedance to your amplifier's stable operating impedance. Use high-quality, appropriately gauged wiring for power, ground, and speaker connections to prevent power loss and ensure safety.
画像: サイド view of the Massive Audio HIPPOXL122 subwoofer, highlighting its robust cast aluminum basket and large magnet assembly.
Image: Custom car audio trunk installation featuring two Massive Audio HIPPOXL122 subwoofers and two amplifiers。
ビジュアルオーバーview と接続
Video: A detailed product preview of the Massive Audio HIPPOXL122 subwoofer, showcasing its physical features, robust construction, and connection points. This video provides a closer look at the design and build quality of the subwoofer.
操作手順
慣らし期間
Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen up and achieve their optimal performance characteristics.
Ampライファイア設定
Carefully set your amplifier's gain, crossover, and bass boost settings according to the amplifier's manual and the subwoofer's specifications. Incorrect settings can lead to distortion, damage to the subwoofer, or poor sound quality. Avoid excessive bass boost, especially at high volumes.
音量レベル
Operate the subwoofer within its rated power handling limits. Continuous operation at extreme volume levels or with distorted signals can cause permanent damage to the voice coil and other components.
画像: 正面 view of the Massive Audio HIPPOXL122 12-inch car audio subwoofer, showcasing the black cone with red stitching and Massive Audio logo.
メンテナンス
The Massive Audio HIPPOXL122 subwoofer is designed for durability. Regular maintenance is minimal but important for long-term performance:
- クリーニング： コーンとサラウンドのお手入れは、柔らかく乾いた布で行ってください。刺激の強い化学薬品や過度の湿気の使用は避けてください。
- 検査： Periodically check the speaker terminals and wiring for secure connections. Ensure the subwoofer cone and surround are free from tears, punctures, or other damage.
- 環境： サブウーファーを極端な温度、直射日光、湿気から保護してください。
トラブルシューティング
If you experience issues with your HIPPOXL122 subwoofer, consider the following common troubleshooting steps:
- 音が出ない: すべての配線接続を確認してください amplifier to the subwoofer. Verify the amplifier is powered on and receiving a signal. Ensure the head unit is functioning correctly.
- 歪んだ音: 減らす amplifier gain or head unit volume. Check for proper crossover settings. Inspect the subwoofer cone and surround for physical damage.
- 弱い低音: 確認する amplifier is providing sufficient power. Check the enclosure for air leaks. Ensure the subwoofer is wired correctly for the desired impedance.
- 過熱： もし、 amplifier or subwoofer feels excessively hot, reduce volume levels and check for proper ventilation. Ensure the impedance load matches the ampライフファイアーの機能。
問題が解決しない場合は、プロのカーオーディオ技術者にご相談ください。
仕様
| 特徴 | 仕様 |
|---|---|
| モデル名 | HIPPOXL122 |
| スピーカータイプ | サブウーファー |
| サブウーファーの直径 | 12インチ |
| スピーカー最大出力 | 4000ワット |
| RMS電力処理 | 2000ワット |
| インピーダンス | デュアル 2 オーム |
| 音声コイル | 3インチ |
| 磁石の構造 | 350oz High Energy Double Stack Strontium |
| 材料 | アルミニウム（バスケット） |
| 製品寸法 | 奥行き13.78インチ x 幅13.9インチ x 高さ10.31インチ |
| アイテム重量 | 49.9ポンド |
箱の中身
- 12-inch subwoofer (HIPPOXL122)
保証情報
Massive Audio products are covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region and product. Please refer to the official Massive Audio website or contact your authorized dealer for specific warranty details and registration procedures. Keep your proof of purchase for warranty claims.
サポート
For technical assistance, troubleshooting, or product inquiries, please visit the official Massive Audio webサイト www.massiveaudio.com or contact your local authorized Massive Audio dealer. You may also find helpful resources and FAQs on their support pages.