Hager 2500 Series Cylindrical Passage Lock 129002 Instruction Manual

導入

This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.

安全情報

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.

パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
• ラッチ機構
• Strike plate (ASA Strike)
• 取り付けネジ
• Operating keys (two supplied, for specific internal components, not for locking function)
• Installation template (if included with physical product)

セットアップとインストール

Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.

1. ドアの準備

Ensure your door is prepared with the following standard dimensions:

• クロスボア: 2-1/8 inches (54 mm) diameter
• Edge Bore (Latch Hole): 1 inch (25 mm) diameter
• バックセット： 2-3/4 インチ (70 mm)

Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.

2. Install Latch Mechanism

1. Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
2. 付属のネジでラッチを固定します。

3. Install Lock Chassis

1. Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
2. Insert the exterior and interior lever assemblies.
3. Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.

4. Install Strike Plate

1. Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
2. Chisel out the mortise for the strike plate to sit flush with the door frame.
3. 付属のネジでストライクプレートを固定します。

Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.

操作手順

The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.

• To open the door, simply depress the lever handle on either side.
• Release the lever to allow the latch bolt to extend and secure the door in the closed position.

注記： While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.

メンテナンス

定期的なメンテナンスにより、ロックの寿命が長くなり、スムーズに動作することが保証されます。

• クリーニング： 外側の表面を柔らかくてきれいな布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
• 潤滑: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
• 検査： Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.

トラブルシューティング

仕様

保証情報

Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.

カスタマーサポート

If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:

• Webサイト： Visit the official Hager webサポート リソースと連絡先情報のサイト。
• 接触： Refer to the packaging or Hager's web電話番号やメールアドレスのサイト。

When contacting support, please have your model number (129002) and purchase details available.