Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit

1. はじめに

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. 安全に関する注意事項

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

• 専門家による取り付けを推奨: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
• 手順を読む: インストールを開始する前に、すべての指示をよくお読みください。
• 保護具を着用する: 設置時には、手袋や目の保護具などの適切な個人用保護具 (PPE) を使用してください。
• 損傷の検査: 取り付け前に、製品に損傷がないか確認してください。損傷した部品は取り付けないでください。
• 適切な換気: 設置中および設置後は十分な換気を確保してください。
• お子様の手の届かない場所に保管してください: この製品は玩具ではありません。お子様の手の届かないところに保管してください。
• 廃棄： Dispose of packaging materials responsibly and according to local regulations.

3. パッケージ内容

インストールを続行する前に、すべてのコンポーネントが揃っていて損傷がないことを確認してください。

• 1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
• Installation accessories (e.g., mounting screws, seals - may vary by kit version)
• ユーザーマニュアル（このドキュメント）

4. セットアップとインストール

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

1. 場所を選択してください： Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
2. オープニングの準備: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's web地点）。
3. Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
4. Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
5. セキュアユニット: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
6. Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
7. テスト機能: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official webサイト。

5. 操作手順

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

• 自動調整: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
• 音響性能: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
• ユーザーコントロールなし: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. メンテナンス

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

• 掃除の頻度: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
• クリーニング手順:
  1. Gently remove the front cover of the air inlet.
  2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
  3. 外側の表面を広告で拭きますamp 布で拭いてください。研磨剤や溶剤は使用しないでください。
  4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
  5. フロントカバーをしっかりと取り付け直します。
• 妨害しないでください: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
• 検査： ユニットに損傷や摩耗の兆候がないか定期的に点検してください。

7。 トラブルシューティング

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. 仕様

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

• モデル番号: 11014085 (also AJA50015)
• ブランド： アルデス
• タイプ： Hygro-Adjustable Acoustic Air Inlet Kit
• 風量範囲: 6 to 45 Liters per second (L/s)
• Acoustic Attenuation: 39デシベル
• 色： 白
• 形： 長方形
• メーカー: ALDES AERAULIQUE
• 含まれるコンポーネント: 1 Product (Air Inlet Unit)
• 必要な電池: いいえ
• 製品カテゴリー: Performance Part (HVAC, Ducts)
• ASIN: B00DCK2EMW

9.保証とサポート

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

• メーカー: ALDES AERAULIQUE
• Webサイト： www.aldes.com
• 顧客サービス： Refer to the ALDES web地域の連絡先情報のサイト。
• スペアパーツ： Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.