Mastercool 90935 Alum-Bond Aluminum Repair Kit

1. 安全情報

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65).

• Always wear appropriate personal protective equipment, including gloves and eye protection, when handling this product.
• Avoid skin and eye contact. In case of contact, flush immediately with plenty of water and seek medical attention.
• 飲み込まないでください。飲み込んだ場合は、直ちに医師の診察を受けてください。
• 換気の良い場所で使用してください。
• お子様やペットの手の届かない場所に保管してください。

2.製品オーバーview

The Mastercool 90935 Alum-Bond Aluminum Repair Kit is a high-performance, two-component aluminum-filled epoxy putty designed for durable repairs on various metal surfaces. It features pure aluminum particles, modified curing agents, and premium additives to ensure maximum strength and longevity.

Image: Mastercool 90935 Alum-Bond Aluminum Repair Kit packaging.

主な特徴:

• Two-Component Aluminum-Filled Epoxy: High-performance repair compound with pure aluminum particles for maximum strength and durability.
• Non-Rusting, Non-Magnetic Finish: Ideal for applications requiring an aluminum-like finish that resists corrosion.
• Strong Bonding Performance: Delivers 8600 psi compression strength and 3500 psi tensile strength.
• Quick-Setting Formula: Cures to full hardness in approximately 4–5 hours at 75 °F (24 °C).
• 広範囲温度耐性: Performs reliably up to 205 °F (96 °C).
• Easy 1:1 Mixing Ratio: Includes separate resin (black cap) and hardener (white cap) for simple, consistent results.

3. 箱の中身

• MASTERCOOL - Alum Bond AC Repair Epoxy 7 Oz (90935)

4. セットアップと準備

1. 表面処理: Ensure the repair surface is clean, dry, and free of grease, oil, rust, or loose particles. Lightly abrade smooth surfaces for better adhesion.
2. 分配: Remove the cap from the two-part syringe. Dispense equal parts of the resin (black cap) and hardener (white cap) onto a clean, disposable mixing surface.
3. 混合： Using a clean mixing stick or spatula, thoroughly mix the two components until a uniform color is achieved. This typically takes about 1-2 minutes.

Visual Guide: Mixing Epoxy

5. 操作手順

1. 応用： Immediately after mixing, apply the epoxy putty firmly and evenly to the prepared repair area. Ensure complete coverage of cracks, holes, or bonding surfaces.
2. スムージング: Use a clean tool or gloved finger to smooth the applied epoxy and remove any excess material before it begins to set.

6. 硬化時間

• 時間設定: The epoxy begins to set within minutes of mixing.
• Functional Cure: Achieves functional hardness in approximately 4-5 hours at 75 °F (24 °C). Lower temperatures will extend curing time.
• 完全治癒: Reaches maximum strength and full cure after 24 hours.

7. Post-Cure Handling

Once fully cured, the Alum-Bond epoxy can be:

• Drilled: For creating new holes or enlarging existing ones.
• Machined: To achieve a desired shape or finish.
• Sanded: To smooth the surface for aesthetic purposes or further treatment.
• 描きました： To match the surrounding surface or for added protection.

8. メンテナンス

• Store unused epoxy components in their original, tightly sealed containers in a cool, dry place.
• Clean mixing tools and surfaces immediately after use with appropriate solvents before the epoxy cures.

9。 トラブルシューティング

• Product does not cure: Ensure that the resin and hardener components are mixed in an exact 1:1 ratio by weight or volume. Inadequate mixing or incorrect ratios can prevent proper curing. Also, verify that the ambient temperature is within the recommended range (above 75 °F / 24 °C) for optimal curing.

10. 仕様

11. 保証とサポート

Mastercool products are backed by a commitment to professional-grade quality and responsive customer service. For specific warranty details or technical support, please refer to the product packaging or contact Mastercool directly.

Mastercool is known for driving new product innovation and technology to make everyday work easier, with products made/assembled in the USA and tested at their headquarters in Randolph, New Jersey.