Promag PCR-330M USB RFIDリーダー ユーザーマニュアル

導入

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Promag PCR-330M USB RFID Reader. The PCR-330M is a 13.56 MHz (MIFARE) keyboard-mode RFID reader designed for various applications requiring efficient and reliable card reading. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

図1: Promag PCR-330M USB RFID Reader. This image shows the top view of the white Promag PCR-330M RFID reader. It features a prominent oval-shaped blue button in the center, flanked by two small indicator lights (one grey, one green). A white USB cable extends from the top edge of the device. The "PROMAG" logo is subtly embossed near the top. The device has a sleek, slightly curved design with blue accents on its sides.

設定

Follow these steps to set up your Promag PCR-330M RFID Reader:

1. デバイスを開梱します。 Carefully remove the PCR-330M reader from its packaging. Ensure all components are present.
2. コンピュータに接続します: Plug the USB cable of the PCR-330M into an available USB port on your computer. The device is plug-and-play and typically does not require additional driver installation for standard keyboard-mode operation.
3. 電源オン: The device will draw power directly from the USB port. The indicator lights on the reader will illuminate briefly upon successful connection.
4. テスト機能: Open a text editor (e.g., Notepad, Word) or any application where text input is possible. Place a compatible 13.56 MHz RFID card (e.g., MIFARE) near or on the reader's sensing area. The card's ID should appear as typed text in the open application.

操作手順

The Promag PCR-330M operates in keyboard emulation mode, meaning it sends card data as if it were typed on a keyboard.

• カードの配置: Position the RFID card directly on the reader's surface or within close proximity (typically 0-5 cm) for optimal reading.
• データ出力: Once a card is read, its unique identifier (UID) or programmed data will be outputted to the active cursor position in any open application.
• インジケーターライト:
  • 緑色のLED： Indicates successful card reading.
  • Grey LED: Indicates power or standby status.
• Multiple Reads: To read the same card again, remove it from the sensing area and then place it back.

メンテナンス

To ensure the longevity and optimal performance of your PCR-330M reader, follow these maintenance guidelines:

• クリーニング： Use a soft, dry, lint-free cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
• ストレージ： デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 取り扱い： デバイスを落としたり、強い衝撃を与えたりしないでください。ケースを開けようとしないでください。asing の場合、保証が無効になります。

トラブルシューティング

If you encounter issues with your Promag PCR-330M, refer to the following common problems and solutions:

これらの解決策を試しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。

仕様

保証情報

Promag products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Promag webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

カスタマーサポート

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Promag customer support.

• メーカー: Promag
• Webサイト： www.promag.com.tw (Note: This is a general placeholder for a manufacturer's website. Please refer to your product packaging for the most accurate support contact information.)
• メールアドレス/電話番号: 公式を参照してください website or product documentation for specific contact details.